Page 1 of 5 12345 LastLast
Results 1 to 30 of 134

Thread: KAM Designs M86 Automag Frame Pre-order.

  1. #1
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330

    KAM Designs M86 Automag Frame Pre-order.

    KAM Designs M86
    This is a evolution of a the Nemesis Autococker frame I designed. I adapted it to work with Automags.


    (asa not included)

    Specs:
    • AGD Spec where it counts. G
    • 86 degree (CCM based shape)f
    • Mounting for Fabco MSV-2 & clippard MPA-3
    • Tapped for Sleeper LPR mount Capable. The frame will be tapped 1/8NPT on the bottom but. You will have to modify the MSV-2 & its mounting plate. It will not come modified.
    • Frame accepts 2X emag trigger magnets above the forward trigger stop.
    • Can be used on twistlock guns or non twistlock.
    • Sear release hole for use on pnuemags.
    • AGD Saftey compatable. (Safetey NOT Included)
    • Trigger included, Forward & back stop setscrews. (AGD trigger compatable)
    • Grip Panels included.



    (asa not included)

    Now the specifics.
    As soon as I have enough spots filled I will have these started.

    Pre-order is only open for two weeks until October 3, 2013. After that I don’t know if I will make any more.

    Price will be $175 CLOSED

    Your choice of finish.
    Dust Black, Gloss Black or Raw (no discount for raw)

    $100 Payment to secure your frame due now.
    Absolutely No refunds. Unless the project falls thru then full refund will be made.
    $75 upon completion.

    Time frame to Completion 2 months after Pre-order closes.

    Post then PM me for payment info.
    Include: Both in PM & Payment notes: Your Address, your screen-name, Which forum, Your finish preference.

    After we hit the magic production number as many frames as ordered will be built. Im not limiting the number. Abracadabra we've hit the magic number. So at about noon on Oct 3rd I call the machine shop with a order & list.

    Spots
    1) Cougar20th - Gloss -
    2) Cougar20th - Dust-
    3) BigEvil - Dust - Paid in full
    4) El Zilcho/emcl29 - Raw - Paid in full
    5) Dirge - Gloss - Paid in full
    6) Rschoi75 - Raw- Paid in Full
    7) Practice Target - Raw- Paid in full
    8) Practice Target - Dust - Paid in full
    9) Donut SD - Gloss - paid in full
    10) DarkApollo - Raw - Paid in Full
    11) Anonymous - Gloss - Paid in Full
    12) Tolar250 - Raw - Paid in full
    13) Nobody - Raw - Paid in full
    14) splat15k - raw - Paid in full
    15) Levi - Dust - Paid in full
    16) notoriousMAG - Dust - paid in full
    17)


    AND CLOSED


    I will be in touch with those that are in on the pre order as soon as I have parts.
    Last edited by cougar20th; 02-09-2014 at 09:51 AM.
    Quote Originally Posted by dano_____ View Post
    I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

  2. #2
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Just a note to everyone. After 4pm eastern time I usually don't get online. I will get back to you the next day so don't worry.
    Weekends I'm mostly offline. So expect contact on Mondays.

    If theres anything wrong feel free to let me know & Ill check into it and straighten things out.

  3. #3
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    5,240
    Will the panels be plastic or aluminum?

  4. #4
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Quote Originally Posted by OPBN View Post
    Will the panels be plastic or aluminum?
    6061 Aluminum. Anodized to match.

  5. #5
    Join Date
    Jul 2011
    Posts
    383
    can you post a pic of an anodized autococker version of the frame?

  6. #6
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Quote Originally Posted by robertreed711 View Post
    can you post a pic of an anodized autococker version of the frame?
    Sorry.
    The autoocker frames have not been anodized yet. We are still completing parts for that gun. So none of it has gone to ano yet.

  7. #7
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Quote Originally Posted by robertreed711 View Post
    can you post a pic of an anodized autococker version of the frame?
    Best picture of the cocker frame I can give you is a still raw one.
    http://i1268.photobucket.com/albums/...ps60be6ee0.jpg

  8. #8
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Reminder to those who have said they want one But have not paid the deposit. The deposit needs to be made before the pre-order is up on October 3rd. Otherwise you will be pulled from the list.

  9. #9
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    If you guys are really interested. Get them now.
    At the rate of true interest this will be the only run made.
    Any leftovers will not be priced the same as in the pre-order. They will be another $25 more.
    Pre-order guys get a introductory price for their participation.

  10. #10
    Join Date
    Apr 2008
    Location
    Butler, PA
    Posts
    263
    pm'd

  11. #11
    Join Date
    Jun 2010
    Location
    So Cal
    Posts
    188
    raw - payment sent

  12. #12
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    AT this point we absolutely have enough to go ahead and build. It was gonna happen anyway but makes me feel better knowing they are sold.
    Still will make as many as the pre-order calls for.

  13. #13
    Join Date
    Jul 2007
    Location
    New Hampshire
    Posts
    483
    Quote Originally Posted by cougar20th View Post
    AT this point we absolutely have enough to go ahead and build. It was gonna happen anyway but makes me feel better knowing they are sold.
    Still will make as many as the pre-order calls for.
    I was a little nervous these weren't going to get made. I am pumped that they are!

  14. #14
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    ONE WEEK LEFT. Closes at noon (eastern time) on OCT 3rd

  15. #15
    Join Date
    Sep 2013
    Posts
    1
    working on it!!!

  16. #16
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Quote Originally Posted by LoboFeroz View Post
    working on it!!!
    Yup my excel list is marked to contact you before closing the preorder.

  17. #17
    Join Date
    Oct 2001
    Location
    Maine, New York
    Posts
    1,227

  18. #18
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Replied, thank



    For every one else. Only 1 1/2 days left.

  19. #19
    Join Date
    Aug 2002
    Location
    Iowa
    Posts
    66
    Pm'd

  20. #20
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Quote Originally Posted by notoriousMAG View Post
    Pm'd
    Replied

  21. #21
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    And CLOSED. Thanks for everyone that made this project possible. I will be in touch when parts come in.

  22. #22
    Join Date
    Aug 2002
    Location
    Iowa
    Posts
    66
    No sir, thank You! We should all owe some appreciation for the select few who are still makin sweet mag dreams come true.

  23. #23
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Quote Originally Posted by notoriousMAG View Post
    No sir, thank You! We should all owe some appreciation for the select few who are still makin sweet mag dreams come true.
    Ive got other designs for parts that Ive been hearing ramblings of AO wanting for the past 10 years.... This is only the beginning.... I do this for fun. After all is said and done I think I will make less then $50 from this.

  24. #24
    Join Date
    Sep 2005
    Location
    Columbia, MO
    Posts
    461
    Any chance to get in a single in black, dust?

  25. #25
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    What the ballz!!!

    You better make me one damn it. I been away and you do this crap....hate you.

  26. #26
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Pm'ed those that missed the deadline.

    For everyone else. Everything is on track. Machinest tells me grips are made and frames start in the next day or so.

  27. #27
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Recieved these from the machinest. Figured you guys would like them. Everything still needs more ops done. So you will see things missing. (trigger area being one of them) But progress.

    The Birth of M86's





  28. #28
    Join Date
    Oct 2001
    Location
    Maine, New York
    Posts
    1,227
    Lookin' fantastic!

  29. #29
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    Looking good!

    I wish I could see his fixture strategy better.

  30. #30
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,199
    you cant see that? I'm running 2 cylinder blocks right now held the same way.

    a machinists vice with a couple of level spacers underneath. clean surface and good wack with a rubber mallat and youre good to go

    what I dont see is how side B is held

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •