Page 2 of 2 FirstFirst 12
Results 31 to 58 of 58

Thread: Mags from France

  1. #31
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    New modifications and add :

    Not a mag but i added a compensator to my T8.1 and bought an extended magazine.




    I installed my 4500 flatline on my RT PRO



    And the last built, a Black classic powerfeed with minimag valve with Shoktech titanium back.

    Last edited by maverick13; 08-09-2014 at 04:17 PM.

  2. #32
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    A new pic of my karta that do better justice to the Luke's grips

    Last edited by maverick13; 06-20-2014 at 02:32 PM.

  3. #33
    Nice familly, but it is missing some Micromags.

  4. #34
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Thanks

    I've a gen4 still not pictured because its Luke's fg need to be anodized.

    But you're right, in my mind, it's still missing a 2k9 emag, a gen1 and a 2000. But all are expensive if in very good condition.
    Actually I've my eyes on a very nice 2k9 emag but no money to buy it right now, so I hope it will still be available when I get funds...... or perhaps may I negociate a 10 times payment !
    Last edited by maverick13; 08-09-2014 at 04:19 PM.

  5. #35
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    I just added a JCS foldable stock to my black classic mag.




  6. #36
    Join Date
    May 2002
    Location
    West Coast
    Posts
    3,852
    Would a tank bump into the stock with the back ASA? I kind of like this idea and might do something like this to one of my mags. I think I would just use a 4oz CO2 tank though. hmmm...

  7. #37
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    I just tested with my 13/3000 guerilla : it bumps but this tank is long for such a little one.
    With the stock fully deployed it can pass pulling down a little the stock, but I think it would mark the tank.

    At first sight I'd say a 4oz CO2 tank will fit with no issue.

  8. #38
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    The new arrived in the familly :

    The Maverick's Armada.

    Luke's Armada body (1 of 3 at this moment), Luke's Armada RTP rail, Luke's LPR foregrip, Luke's mini vert frame, RPG subzero feedneck, CCM fittings (Luke is not making feednecks and fittings !!!!) and brand new purple Xvalve. MSV2 and Ram inside.

    All Luke's part anodized by Caustic Customs.







    No pics of the other side, the aluminium air line is still not anodized !
    Last edited by maverick13; 08-14-2014 at 11:49 AM.

  9. #39
    Looks good but I have to ask, what's up with that grip screw?

  10. #40
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    This grip screw holds the Ram, without drilling the frame.
    I don't know if it will stay like that. Perhaps I'll change of mind and drill the frame, at this moment it seems to me not to be a so bad idea !

    What do you think ?

  11. #41
    Excellent collection. I'm guessing you have one of the best collections in Europe.

  12. #42
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Thanks.

  13. #43
    Join Date
    Dec 2009
    Location
    Austin, TX
    Posts
    193
    Very nice!

  14. #44
    Join Date
    Mar 2013
    Location
    Medford MA
    Posts
    208
    I really like the Armada body in gloss black. Great build!

  15. #45
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Thanks a lot.

  16. #46
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Today, it's not a new addition to the familly, just a change on one of my markers.

    A few months ago, I bought a Venomous Design EP set, but it has been sitting in my box since I got it, because I was not satisfied with my ideas to use it either because I didn't like the result or because it made me "broke" a marker I liked (as I like all my markers it's not easy !).

    Finally I stopped on this set up. It's my Logic RPG on wich I replaced the shadow rail and ULE body.


  17. #47
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Hi guys,

    It's a long time since I updated this thread !

    I just noticed I didn't even posted pics of my Phoenix and my Armada achieved, with the air lines anodized (here in France, and there's no comparition possible with Stephen's work)

    The Phoenix





    The Armada





    A great thanks to Kyle for his support on the alu air lines, without him I'd never get them.

    A few month ago I built this one, my Gumshoe mag, with Luke's Gumshoe rail, Logic UMF frame with Luke's panels and chrome ule body, but I didn't posted pics because it wasn't working (the reg valve pin assembly litterally exploded when I aired it up !). Now, it's fixed and it's shooting ropes !



    And the last one, finished this sunday, with a freshly received Luke's foregrip (anodized by Caustic), a Shadow rail and an Angel 05 Speed/Gat frame.
    This one took me about 3 or 4 months to get all the parts together.

    Last edited by maverick13; 10-27-2014 at 02:20 PM.

  18. #48
    Join Date
    May 2002
    Location
    West Coast
    Posts
    3,852
    That Angel mag is looking real nice. Glad you got the frame and put it to use.

  19. #49
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    You get the credit of the main lines !
    And with your help, it works !
    The grips were way more difficult to find than I thought.
    All were too long, like the airwalk ones, it was a real pain to get a pair fitting the frame (even if they are a bit narrow).

  20. #50
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Some pics of my last babies.

    These ones are long time running projects.

    I put all the parts together but I still haven't tested them (no time and no more air !).

    Here are the pics

    1/ Carbon Emag





    2/ Ultra light carbon mag

    This one started around april 2013 when I get the frame from one of my friend but with no other idea of what I could put around ....
    Luke and XMT did the right parts at the right time !





    3/ M86 carbon toxic

    I received the frame this morning !






    I must say I think these are almost the last ones of my collection (I still have a RT Classic waiting for a XMT ULE body) because I really have no more place on my walls to put them and I don't want to put them in a box just to say "I have them".

    I already sold my classic and my ego mag to make some place and I'm probably going to sell 5 or 6 more.
    Last edited by maverick13; 11-28-2014 at 06:46 PM.

  21. #51
    Join Date
    May 2002
    Location
    West Coast
    Posts
    3,852
    "wall"???? You must post pictures of all your mags on one wall. The newest additions to the collection look amazing. Adding the fact that you are over seas make this collection even more impressive.

  22. #52
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Thanks Ross.

    They are not on only one wall !
    15 are on a wall hung on a "display wall"
    3 are on another wall
    9 are hung on the side of Ikea shelves (you know, the ones with the scales on the sides)
    5 are in a console under my desk
    Only the sydarm is in a gun case
    Last edited by maverick13; 11-30-2014 at 11:05 AM.

  23. #53
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,834
    Simple and clean, love it.


  24. #54
    that UL frame fits that rail perfectly.

  25. #55
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Thanks Luke and Bowcycle.

    I'm glad you like it.

    This one gave me some serious headache, and sometimes I was close to surrender.

    I still have some work to do on it.

    I've a big leak and I don't know if it's the valve itself or if it's due to my build.
    I'll have to switch some valves and mags !
    Last edited by maverick13; 11-30-2014 at 05:46 AM.

  26. #56
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    YESSSSSSS !

    All the new ones are working fine !

    The Carbon Emag : Nothing to do ! It worked perfectly at the first attempt (KNM : thanks for the lowers !)
    The M86 carbon toxic : I just had to adjust the trigger rod length and the LPR pressure.
    The Ultra light carbon mag : I changed the on/off and it fixed the leak.

  27. #57
    Join Date
    Mar 2007
    Location
    Was in FL. now LI N.Y.
    Posts
    618
    WOW they are all lookers Every marker is well done and easy on the eyes to say the least
    My fav is post #50 "Carbon E-mag"

  28. #58
    Join Date
    Aug 2011
    Location
    Marseille - France
    Posts
    457
    Thanks, man

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •