Automag with RT goes putt-putt...
So, my Minimag RT madness continues (following up from: http://www.automags.org/forums/showt...rebuild%28s%29)
I rebuilt the valve using a AGD kit (no eBay shiznit!), and while I was waiting for the parts, had Luke set the valve up for a ULT assy. Forward to today: I rebuilt the valve using some of the parts out of the kit (didn't need to rebuild the new ULT). BUT, when I dry fire it.... I get a putt-putt-putt weak sound. It's just meh. I tried a paintball in it, and I probably could have caught it in midair.
SO... I'm not getting the velocity I would expect, even with it turned all the way in... what am I looking for? What did I miss?
Try using the regular on/off. See what you get.
What is the Output on your tank?
I don't think I can put my old one back in... it was the single o-ring style. I did order a new regulator piston... because I've replaced everything else.
As far as tank regulator, I'm using a Ninja HP version, my other tank is going to get a SHP reg this weekend. If 850 isn't good enough, 1100 should be better.
Frustrated... when a 'Cocker is proving more reliable, you know something is wrong.
You can put another o-ring around the stock on/off top oring, which is how all of the other stock on/offs are set up.
How many shims do you have in the ULT?
Is there at least a 1000 psi in your tank?
Did you have it working with the old on/off?
Ah... I assumed they looked like the ULE with the oring mounted around the diameter of the upper half.
3 shims currently... I tried 1 more, I tried 1 less... same same.
Not anymore. I have an issue (might be part and parcel), where air rushes down the barrel for a second until the on/off locks in.
No. I was used when I got it, and it didn't work then either. Then I did an eBay re-oring, and made it worse.
Lots of oil?
Lvl10 yet, or not?
I'm surprised it doesn't leak when you turned the reg all the way in. Does the valve reg have two springs in the back (one inside the other)?