Results 1 to 18 of 18

Thread: big cockers and cocker parts sale thread

  1. #1
    Join Date
    Nov 2007
    Posts
    339

    big cockers and cocker parts sale thread

    if u have question or need more picture email me at hmcl110@yahoo.com
    i take paypal, money order and check but will place a hold on mo and checks
    prices does not include shipping cost, the minimum i charge for shipping and handing will be $3.50. the shipping does not include insurance, if u want it insured there will be an extra fee. i mainly ship through usps.

    i'm willing to ship out of the country but paypal payment only. no insurance or tracking number, you are purchasing on your own risk. i am not responsible for non delivery, all the package i have ship have been received by the buyer. all i will provide is the custom number. if u want insurance shipping is going to be about 30 to 40 plus the cost of insurance.

    sorry not looking for any trades at this time


    ttt has first dibs

    click to enlarge



    $475 for merlin
    going to need to time and tune the marker
    more pics here
    http://s637.photobucket.com/user/hmc...?sort=3&page=1



    $1300 for pbx
    more pics here
    http://s637.photobucket.com/user/hmc...?sort=3&page=1



    sold $650 for nexus sold
    comes with non usb tadao board but the screen is dead
    more pics here
    http://s637.photobucket.com/user/hmc...?sort=3&page=1
    Last edited by hmcl281; 10-30-2013 at 06:27 PM.

  2. #2
    Join Date
    Nov 2007
    Posts
    339

    $650
    blue mq1 valve installed
    does not come with a board
    more pics here
    http://s637.photobucket.com/user/hmc...?sort=3&page=1



    $600 for prototype half block
    will need a board
    more pics here
    http://s637.photobucket.com/user/hmc...?sort=3&page=1




    $200 for gx4
    more pcis here
    http://s637.photobucket.com/user/hmc...?sort=3&page=1
    Last edited by hmcl281; 10-30-2013 at 06:27 PM.

  3. #3
    Join Date
    Nov 2007
    Posts
    339

    $80 for t8 with case
    will not come with a mag



    $40 for the lapco tiberius barrel
    $25 for the mag
    $5 for each tiberius case



    $75 for 05 cyborg
    missing the lpr, valve stem and valve spring, bolt and pull pin



    $85 for pm5
    when i went to air it up air seem to be leaking out of the bolt, do not know much about them. was working fine the last time i aired it. has eye installed



    $1 for either the jt visor or bottom
    $2 for each JT Axiom FX10 in the right pic
    Last edited by hmcl281; 10-30-2013 at 06:28 PM.

  4. #4
    Join Date
    Nov 2007
    Posts
    339

    $1 for each speed feed



    $5 for each wgp barrel cover



    $20 for each cocker threaded barrel



    $8 for each older style kaner front or back



    $30 for the .684 kaner back
    $20 for each of the other kaner front or back



    $20 for the ul front
    sold $25 for the ul back sold
    $15 for the proto back



    $12 for either the .682 or .684 freak insert
    $10 for either the .687 or .689 freak insert
    $6 for each of the bigger freak insert
    $8 for the freak case



    $30 for empire barrel case, holds 6 barrel
    Last edited by hmcl281; 10-30-2013 at 06:28 PM.

  5. #5
    Join Date
    Nov 2007
    Posts
    339

    $30 for each reg
    sold red/black dye reg sold
    sold st reg sold



    sold $15 for the black gas through sold
    $20 for the middle reg
    $5 for the broke stock wgp reg, selling it for spare parts



    $18 for each on/off
    sold eclispe on/off sold
    sold st on/off sold



    sold $15 for the sp max flow, will need to be rebuild and gauge is blown sold



    $8 for each rail in the left pic
    $3 for each drop in the right pic



    $10 for each pair of color macro fitting
    sold red pair sold
    sold black pair sold



    $10 for each gauge in the left pic
    sold cp 160 psi gauge sold
    sold 300 psi gauge sold
    $5 for each of the gauge in the middle or right pic
    wgp tank reg will only work on wgp tank regulator
    Last edited by hmcl281; 10-30-2013 at 06:28 PM.

  6. #6
    Join Date
    Nov 2007
    Posts
    339

    $135 bm body
    come with lower internals, sr bolt, sled and pull pin



    $65 for mini mid block orracle body
    just the body, no internals



    $85 for mid block ss with karni fb
    just the body no internals



    $150 for esfl
    comes with internals



    sold $200 for z force body kit sold
    comes with lower internals
    Last edited by hmcl281; 10-30-2013 at 06:29 PM.

  7. #7
    Join Date
    Nov 2007
    Posts
    339

    $25 for rt feed body
    no internals



    $25 for rt feed hb body
    no internals
    body was milled a little to low



    $25 for each cocker body
    no internals



    $65 for trilogy hb pump body kit
    no internals



    $85 for mini pump body kit
    no internals and you will need to thread for a banjo bolt threading



    $15 for each ram



    sold $25 for each black eclipse qev all sold



    sold $50 for red eclipse ram with red barbs sold
    sold $40 for black mp4 ram sold




    sold $100 for red eclipse lpr sold
    $100 for silver aka lpr
    sold $30 for sonic lpr sold
    $30 for st lpr
    Last edited by hmcl281; 10-30-2013 at 06:29 PM.

  8. #8
    Join Date
    Nov 2007
    Posts
    339

    $8 for the trilogy lpr
    $1 for each of the ram cap



    $20 for each cocker threaded feed
    sold dust black feed left middle row sold
    $5 for each feed cap



    $8 for each ccm collar



    $20 for the silver ccm meril thread feed
    $13 for the silver/blue merlin thread feed, came off of a works
    $5 for each of the black macdev merlin thread feed



    $3 for each front block
    missing the screw underneath the fb



    $10 for each back block or vertical asa
    sold black bb sold
    Last edited by hmcl281; 10-30-2013 at 06:29 PM.

  9. #9
    Join Date
    Nov 2007
    Posts
    339

    sold $15 for the reg tester, the relieve valve mainly works well with pressure under 300 psi sold
    sold $15 for the lpr tester with relief valve, you will need a gauge sold
    $10 for the lpr tester cap, will need a gauge



    $25 for each 2k lpc
    sold red lpc sold



    $4 for each pre 2k banjo bolt
    $10 for each 2k banjo bolt
    sold $20 for each merlin banjo bolt both sold



    $10 for each ans valve
    $4 for each brass valve body
    $4 for each jam nut
    $1 for each valve set screw
    $10 for each of the brass ivg
    $15 for each non brass ivg



    $50 for the aka valve
    $25 for each of the other merlin size valve



    $15 for the bm sled
    $20 for each bm snatch



    sold $25 for the st tail sold
    Last edited by hmcl281; 10-30-2013 at 06:29 PM.

  10. #10
    Join Date
    Nov 2007
    Posts
    339

    $10 for each delrin pull pin
    $4 for each of the 4 left metal pull pin
    $8 for the ans pull pin
    $13 for the aka pull pin



    $.50 for each metal or delrin ball bearing



    sold $5 for the evo length metal bolt sold
    sold $25 for the evo lenght st red/white bolt with pull pin sold
    $20
    $10 for the blue pre 2k bolt, missing ball plunger



    $40 for wgp tech mat



    $30 for the blue/black profiler
    $8 for the grey vforce
    $40 for the green/black jt
    Last edited by hmcl281; 10-30-2013 at 06:30 PM.

  11. #11
    Join Date
    Nov 2007
    Posts
    339

    sold $60 for the e2 board version .24 sold



    $35 for each e2 noid cover, will come with the mini manifold but no cocking noid
    sold black/red e2 cover sold
    sold red e2 noid cover sold
    sold $20 for the black w noid cover sold



    $5 for the blue e1 trigger
    $15 for each of the other trigger
    sold 2nd to left trigger sold



    $25 for each eblade eye
    $8 for eye cover
    sold less bent eye cover sold
    $3 for each karni noid wire cover



    $30 for each of the e1 frames, will not come with the sear noid
    $50 for the red e2 frame, will not come with the sear noid and a delrin trigger instead of the one pictured




    $.50 for each noid mounting screw
    $3 for each eblade sear
    $1 for each eblade spring
    $1 for each eblade pin
    $3 for each eblade button
    sold $2 for each board mounting screw all sold
    $.50 for each eblade board grub screw



    $5 for each pair of grip in the left pic
    sold $20 for the black eclipse grip, need to put grove for sear noid sold
    sold $30 for each red/black eclipse grip, have grove already for sear noid both sold



    $5 for each grip, been cut into
    Last edited by hmcl281; 10-30-2013 at 06:30 PM.

  12. #12
    Join Date
    Nov 2007
    Posts
    339

    $8 for the left grip
    $5 for the middle grip
    $3 for the right grip



    $3 for each sear, trigger, trigger sear or safety



    $10 for the red or black metal ball detent
    sold black detent
    $15 for the other detent
    sold one red cp detent sold



    $1 for each vf tactical jewel



    $2 for each spyder bolt



    $5 for each dm or angle grips
    sold both top dm grips sold



    $15 for the green molle harness
    $15 for the empire pack
    $25 for the qloader pack
    Last edited by hmcl281; 10-30-2013 at 06:31 PM.

  13. #13
    Join Date
    Aug 2007
    Location
    New York
    Posts
    1,543
    I'll take the top two Dm grips. The hybrids and the ones to the right. Pm me total and paypal info. Thanks!

  14. #14
    Join Date
    Dec 2009
    Location
    Austin, TX
    Posts
    176
    I'll take the two red detents, hit me up with paypal info thx Joseph.

  15. #15
    Join Date
    Mar 2009
    Location
    New England
    Posts
    80
    Pm incoming!
    Last edited by refineda4; 11-11-2013 at 05:07 PM.

  16. #16
    Join Date
    Sep 2004
    Posts
    1,157
    PM me your paypal and what you want for shipping to 55119 for the S swoop eblade trigger
    loose cars and fast women

  17. #17
    Join Date
    Nov 2007
    Posts
    339
    added some items and updated the inventory

  18. #18
    Join Date
    Jul 2013
    Location
    CT
    Posts
    72
    Tiberius t8. Pm'd

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •