are they interchangable?
are they interchangable?
in what regards? on other guns or mags?
the backs of classic mags? yes
from classic to Emag/Xvalve/ReTro? no
a standard aftermarket reg? yes?
please elaborate on on your question so that people will know what you are talking about so that they can help you better.
sorry, can't think straight, working too many hours. what i meant to ask was are hpa tank regulators interchangable?
any screw in tank regs are easily interchangeable. if you have a PE and want to switch to a Ninja, or something like that, then unscrew and screw.
This, but also to add (which no-one else has brought up) it is possible to put a 3k reg on a 4500 tank- Don't do that, it's bad. Always make sure the tank matches the reg pressure, If you must mix and match in a pinch, never overfill your lowest rating, and never let someone who is not yourself fill that tank.
Whoever is filling the tank should be checking the reg. All regs are marked with max PSI.
better said: put a 3K reg on a 3K tank and a 4.5K reg on a 4.5 tank. don't try to mix and match. that can be an accident waiting to happen.
I have a couple of questions to add: I have an old Nitro Duck tank with an adjustable reg, it's the one that used the ring cradle 92 ci x 3000 psi I think. The tank is past it's 15 year life so I'm wondering if there is a new same size tank out there I could get to use with reg from the old tank. If not I also have an old Max Flo reg ( not the one that screws into the bottle but the bottle screws into it like an on off Asa) the reg is low pressure and I want to convert it to high pressure... How?
2 different questions have two different answers...
the bad thing that NitroDuck tanks have is that PMS/Nitroduck used a different threading from other companies that produced HPA tanks. its 5/8ths where the world is 3/4ths or vice versa. so you may or may not be able to find a tank in hydro for that reg.
i am not hugely familiar with the old Maxflos but i do know that you would have to change the main spring pack to go from low pressure to high. now, the bigger question is finding an HP spring pack for replacement. i'd look at I&I and some of the older stores that collected older parts like that.
The spring that is in it now is pretty stiff but it has a low pressure gauge on it. I guess the High pressure spring is even stiffer ?
Flatliner333:
Its not just a spring that is needed. The smart parts manifold style regulators need a different manifold body and piston as well in order to change from low pressure to high pressure. The newer inline regulators needed just the front section that screwed into the manifold body and also the high pressure piston and spring, which made the change a bit easier and less expensive.
The original manifold style regulators used unregulated bottles with left hand threads. The newer manifold style regulators used regulated bottles with standard ASA threads.
Except for the Automag in front, its usually the man behind the equipment that counts.