lol, go look at my rt repair thread then
lol, go look at my rt repair thread then
I tried at ULT in my classic valve. It dry fires great in my apartment. Any problems with a ULT in a classic valve?
They can be hit or miss. The return pressure on a classic is about 300-400 psi LESS on the on off pin on a classic valve and with the smaller diameter pin can sometimes cause short stroking. They work ok, but jam as many shim in as you can so that pin can clear the oring as fast as possible.
if you have tha reactor on/off use that...it worked tha same as a RT on/off in a couple of classic valves i had in tha past.
So did anyone ever make an RT on/off that was shim-adjustable?
"Accuracy by aiming."
Definitely not on the A-Team.
AGD did, all of them.
You can put shims between the bottom and top halves.
Huh, didn't realize that. It's been so long since I saw the inside of my X-valve that I'm like a lost tourist when it comes to RT's.
I'll have to check that out then... Just dropped an RT on/off in a classic, and it definitely makes a difference. That plus the LX bolt lightens the trigger significantly. Should probably figure out a way to put numbers to that...