New Xmag owner

[PyroFiend]

So I just bought an Xmag...I'm stupidly excited.
I'm aware the ace in it doesn't work, that's it's own situation.

Is there anything I need to know about Xmags? I own an Emag as well.
What holds the breach in place? the barrel?

Thanks in advance.

PyroFiend

[Nobody]

the bolt holds the breech in place.

there isn't much difference between an Xmag to an Emag, except for the body of course. BigEvil, Bunny and other Xmag owners know more about them than i do. i look and fondle, but never owned. but you don't do anything different to an Xmag compared to an Emag.

[SeeK]

i look and fondle, but never owned. but you don't do anything different to an Xmag compared to an Emag.

Except fondle them.

[Redic]

the bolt holds the breech in place.

there isn't much difference between an Xmag to an Emag, except for the body of course. BigEvil, Bunny and other Xmag owners know more about them than i do. i look and fondle, but never owned. but you don't do anything different to an Xmag compared to an Emag.

So nobody but yhe bolt does not hold the breech. The barrel holds the breech in place

The lowers are the same as the emag
The ACE is not really needed as long as you lvl 10 is set up correctly

[BTAutoMag]

Dont over tighten the sear bolt or youll get a curious bump on the other side

that's my wealth of knowledge on xmags

[splat15k]

Dont over tighten the sear bolt or youll get a curious bump on the other side

that's my wealth of knowledge on xmags

This is excellent advice! That's the first thing I look for when I'm inspecting BST listing pictures.

[Bunny]

Welcome! Feel free to add your name to the Xmag Owners list. If you are familiar with E-mags, you should be okay with an Xmag. Most of the ACE boards have fried over the years, but it seems like a properly tuned lvl10 is fine for the Xmag. Tunaman is your go to guy for parts you need or software to be upgraded to Xmod.

Make sure you screw a barrel onto the breach or the breach will fall out of your xmag.

I suggest taking a look at the tech guide.... http://www.airgundesignsusa.com/xmag/

[knownothingmags]

the threaded ring that is in the body, (you can see it when you take the breech out)
there in a set screw holding it in place(which can be accessed from the underside of the body),
so that it doesn't back out. make sure that the set screw isn't smashed into the threads of this ring.
I took my set screw out and cut a fat piece of an oring and put it in the hole, then reinstalled the setscrew.