Results 1 to 6 of 6

Thread: A.N.S. Reg Problem.

  1. #1
    Join Date
    Jan 2005
    Location
    The South Downs in Blighty
    Posts
    495

    A.N.S. Reg Problem.

    It appears I have a problem with my screw in 1050 psi A.N.S. reg. Basically you can fill the bottle but it's not releasing enough air pressure to charge my Retro valve, it won't even shoot! Does anyone have any ideas what the problem might be?

  2. #2
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    2,436
    First. Have you put a different tank on the marker to prove its the tank and not the gun?

  3. #3
    Join Date
    Jan 2005
    Location
    The South Downs in Blighty
    Posts
    495
    Yup done that, swapped it between two markers etc.

  4. #4
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    2,436
    How old is it? If out of any and all warranty is dismantle it and clean out any and all debris that may have gotten in. Dirty air can cause issues in there.

  5. #5
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    Put a 1500psi gauge on your ASA and check the pressure coming from the tank.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  6. #6
    Join Date
    Jan 2005
    Location
    The South Downs in Blighty
    Posts
    495
    Good idea, if I were to guess though it would be around 100-200 psi if that. I think I have one somewhere that's a good idea, I'll report back as soon I as fit it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •