More level 10 frustrations

[PyroFiend]

So it was running fine and dandy.
Now the bolt isn't wanting to return back home. Only thing that's slightly different is that I have a blue bumper in now because I misplaced the one that was in the gun. This possibly could be a spring issue but I figured I'd post and wait for feedback as I'm dinking away with it.

Thanks!

[need4reebs]

at all or its just having bolt stick and not resetting?

[need4reebs]

What spring are you using? wat carrier? any shims? what valve are u using?

[PyroFiend]

You're not going to believe this.....
The brass piece of the power tube is sheared.

Decided to look at the Xmag guts to see if I could find any clues and IT won't even take air from the ASA...
I'm having a bad day.

need, you're local, want me to text you a picture of the damage?

[need4reebs]

You're not going to believe this.....
The brass piece of the power tube is sheared.

Decided to look at the Xmag guts to see if I could find any clues and IT won't even take air from the ASA...
I'm having a bad day.

need, you're local, want me to text you a picture of the damage?

YIKES!!! yeah ill PM ya

[PyroFiend]

http://i865.photobucket.com/albums/a...g?t=1386799909

[Tunaman]

These don't need to be that tight. Just snug is fine. I have them here if you need one. email tunaman5@verizon.net

[PyroFiend]

Thats the thing...I only hand tightened it when I put the gun back together and played a few weeks ago.
That happened when I took the gun apart!

I just emailed you, thanks!

[PyroFiend]

It lives.
Sort of. Had to borrow parts from another setup but hey! 1 gun fixed.

[Tunaman]

Thats the thing...I only hand tightened it when I put the gun back together and played a few weeks ago.
That happened when I took the gun apart!

I just emailed you, thanks!

Hand tight is too loose. Just snug with a wrench

[PyroFiend]

Yessir!

Thanks again!