Page 8 of 8 FirstFirst ... 45678
Results 211 to 240 of 240

Thread: Uni-Frame?

  1. #211
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by BigEvil View Post
    It doesnt work... sorry..




    all mine
    you cant do worse then my prototype end test. lol
    unmeasured pressure test. I hit it with a hammer to see how the layer splits.
    then all stuff that isn't good gets shredded and scraped, garbage.
    dot have the facility to recycle my print scrap.

  2. #212
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,433

  3. #213
    Weren't we supposed to have some assembled pics from bigevil at some point?

  4. #214
    Thats very cool to be able to print your cad file to make the prototype.

  5. #215
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Yes, Ive had some delays. But I believe I forgot to adjust something in the prototype. Been messing with it. Still going to send it to BE. But think I need to run thru one more prototype.
    Last edited by cougar20th; 03-11-2014 at 01:24 PM.
    [SIGPIC][/SIGPIC]

  6. #216
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,915
    Quote Originally Posted by robertreed711 View Post
    Weren't we supposed to have some assembled pics from bigevil at some point?
    I got the triggers yesterday.. still waiting on the rest.

  7. #217
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,915

  8. #218
    The one on the left looks awesome, the one on the right might be good too.

    If ordering logistics and cost allow, I'd probably order a couple

    Obviously not an issue for plastic triggers but for the metal ones, have you considered the possibility of increasing the trigger pivot OD to allow purchasers to add a thin wall delrin (or similar) bushing in there without the wall getting creepy?

  9. #219
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Quote Originally Posted by Spiritchaser View Post
    The one on the left looks awesome, the one on the right might be good too.

    If ordering logistics and cost allow, I'd probably order a couple

    Obviously not an issue for plastic triggers but for the metal ones, have you considered the possibility of increasing the trigger pivot OD to allow purchasers to add a thin wall delrin (or similar) bushing in there without the wall getting creepy?
    The one on the left is NOT for this frame. Its another project altogether. There is no way it will be for the Demon frames. It was just sent to B.E. for testing at the same time.

    The one on the right is for the Demon frame.

    Theres no need for a delrin bushing. These pivot just fine when made of aluminum.

  10. #220
    The one on the left was a surprise, it looks a LOT like one I'm currently carving out for a pneumag. Yours is a bit deeper fore-aft than the one I'm making, wider too I think, mine is only 1/4"

    The plastic isn't so much for friction as for feel... Not sure how to describe it. No big deal in any case thanks for the reply

  11. #221
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by Xmagterror View Post
    Thats very cool to be able to print your cad file to make the prototype.
    yeah it is, that's why im here. lol
    My sydarm weighs less than yours!!!

  12. #222
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,915
    Working on it..


  13. #223
    Join Date
    May 2010
    Location
    Carlisle, PA
    Posts
    195
    That look awesome........

  14. #224
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    The pictures great. It shows the height difference well. From what I recall the shift up is 1/2" - 5/8" I would have to check the model for exact.

    Note: the front foregrip mount is not on the prototype. It will be on the final.

  15. #225
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by cougar20th View Post
    The pictures great. It shows the height difference well. From what I recall the shift up is 1/2" - 5/8" I would have to check the model for exact.

    Note: the front foregrip mount is not on the prototype. It will be on the final.
    printer is setup for a lot higher resolution prints . if you need another made, when you get it finished.

  16. #226
    Any word?

  17. #227
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Scotts not had the time to test it thoroughly yet.

    Im getting everything inline so that when machine time frees up these can be made. Probably have a very expensive aluminum prototype made as one final check. Ive got quotes (which will change due to material costs). Ive got a rough sales structure laid out for those that only want some of the parts not all.
    Last edited by cougar20th; 04-21-2014 at 01:14 PM.

  18. #228
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    935
    i have held this and totally agree so far with Scott's assessment of it so far. it is comfortable but at the time, it was not on gun. crazily, the 2 finger trigger is rather comfortable.

  19. #229
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Im still on this. I found some minor things that needed to be tweaked. But have spent hours checking & rechecking again.

  20. #230
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,915
    ...and my source for air is currently out of commission for a bit. I was hoping to have it mounted to something to show off at LL7

  21. #231
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Quote Originally Posted by BigEvil View Post
    ...and my source for air is currently out of commission for a bit. I was hoping to have it mounted to something to show off at LL7
    Take it with you anyway to show off. Let some of the people see the prototype.

    Guys remember its a prototype. I did some major hacking on it already so its not the prettiest thing. There are several things on that frame that will differ from the final.

  22. #232
    When you have it all said and done I will buy one from you if you don't mind! It looks sweet!

  23. #233
    Just resurrecting this thread to see if there is any news on testing etc. Couger? KNM? BigEvil?

  24. #234
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Was gonna wait for parts for pictures but I guess I need to post second prototypes being machined now. Hoping to have it soon.

  25. #235
    Join Date
    May 2004
    Location
    Schenectady NY
    Posts
    478
    Excellent!

  26. #236
    I can make these parts for you if you interest. Aluminum machining might helpful to you. You can talk to me. I hope the finish on the parts is what you were asking for.

  27. #237
    Join Date
    Nov 2013
    Location
    Austria
    Posts
    102
    Quote Originally Posted by Patron God of Pirates View Post
    Just resurrecting this thread to see if there is any news on testing etc. Couger? KNM? BigEvil?
    I'd like to second that - this looks VERY nice!
    respect!

  28. #238
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Having the prototype made has fallen thru. Ive been in talks with another machinist to have it cut.

  29. #239
    Cougar posted in the Uni-frame thread

    Quote Originally Posted by cougar20th View Post
    Having the prototype made has fallen thru. Ive been in talks with another machinist to have it cut.
    Oh...

  30. #240
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    1,425
    Trust me im trying. Once i get the m86's behind me all my attention going to this project.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •