Results 1 to 27 of 27

Thread: Milling ion frame

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Milling ion frame

    Can anybody here mill an ion frame to fit up to automag rail?

  2. #2
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    624
    they flush fit without to much trouble, just make a new front frame screw hole...

    (super_stanchy)
    http://www.youtube.com/watch?feature...&v=SPbQzj9ejBA

    OR...

    (Robertsr)
    you could hide a full automag inside an ion body/frame for an ultimate sleeper

    http://www.mcarterbrown.com/forums/d...y-got-ion.html



    or you could do what i did and drop a hacked up rail into a broken ion





    don't have one of the two parts together but i'm sure you can line the cuts on the frame with the rail...

  3. #3
    Quote Originally Posted by rukh013 View Post
    they flush fit without to much trouble, just make a new front frame screw hole...

    (super_stanchy)
    http://www.youtube.com/watch?feature...&v=SPbQzj9ejBA

    OR...

    (Robertsr)
    you could hide a full automag inside an ion body/frame for an ultimate sleeper

    http://www.mcarterbrown.com/forums/d...y-got-ion.html



    or you could do what i did and drop a hacked up rail into a broken ion





    don't have one of the two parts together but i'm sure you can line the cuts on the frame with the rail...
    THANK's keep the ideas coming
    I'm familiar with stanchy he's just super busy with stuff so I may do it myself just wondering if there was a how to guide? But I'm sure I could just match up rail holes mark it and go from there.This is a mock up of my project phase one I still need some parts
    Last edited by river031403; 01-24-2014 at 10:59 PM.

  4. #4
    Are you thinking pnueMag for this project?Seems pretty doable.If you can find an aftermarket Ion frame for cheap they may be better,most have alot more space inside,the NDZ Scorpion frames a huge inside compared to stock ones.
    If you need any measurements of anything PM me,I've got a ton of Ion stuff

  5. #5
    Quote Originally Posted by punisher068 View Post
    Are you thinking pnueMag for this project?Seems pretty doable.If you can find an aftermarket Ion frame for cheap they may be better,most have alot more space inside,the NDZ Scorpion frames a huge inside compared to stock ones.
    If you need any measurements of anything PM me,I've got a ton of Ion stuff
    My intent exactly was to do a pneumag down the road pm inbound

  6. #6
    This is the frame I plan on putting on my mag

  7. #7
    is it comfy?

  8. #8
    Quote Originally Posted by knownothingmags View Post
    is it comfy?
    Berry comfy!
    Next is either rt or ult on/off to lighten trigger pull a bit
    Or I may just purchase an Xvalve with ult and level 10 from tuna

  9. #9
    Updated


  10. #10
    Join Date
    Nov 2013
    Location
    detroit, Michigan
    Posts
    246
    are you using 10 rnd tubes? I see the sc feed gate

  11. #11
    Quote Originally Posted by magman313 View Post
    are you using 10 rnd tubes? I see the sc feed gate
    Just for testing purposes


  12. #12
    pretty freaking cool.
    new stuff is always nice.

  13. #13
    Quote Originally Posted by knownothingmags View Post
    pretty freaking cool.
    new stuff is always nice.
    Thank for this video I swapped on/offs this is rt on/off not sure of pin length haven't measured it yet
    http://youtu.be/AYjse600zns

  14. #14

    now that's awesome.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •