Page 1 of 2 12 LastLast
Results 1 to 30 of 59

Thread: do you want new clamping feednecks?

  1. #1
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    900

    do you want new clamping feednecks?

    with the supply of Angel threaded clamping feednecks starting to run dry, and CCM feednecks are there but lacking(i hate them personally, but at times they are the only choice). do you(AO & AGD community) want a new supply of clamping feednecks? what would you pay for one/them?

    i think i've found something that can work and is readily available. i can't really go into detail, but suffice to say, for a little work on my part, i can get and supply new feednecks for all.

    so i want to know what everyone thinks. also, this isn't a pre-order. if i get enough interest, i will then post up made items for sale. basically, its a demand and supply. as long as everyone is demanding them, i will supply them.

  2. #2
    Join Date
    Nov 2012
    Location
    Finland
    Posts
    441
    Ideally I'd like adapter for for something like Empire clamping feedneck
    17637_Empire_Clamping_Feedneck_Dust_Black.jpg

  3. #3
    Join Date
    Oct 2004
    Location
    Sebring, Florida
    Posts
    603
    (little kid sing song voice) I know what what your doing. Go for it! I want to see if you and I are thinking alike.
    Last edited by Runamok; 01-25-2014 at 05:30 AM.
    I took the road least traveled...now where the hell am I ?

  4. #4
    Join Date
    Mar 2008
    Location
    Grand Rapids, MI
    Posts
    395
    Yea, depending on cost I would be game for new feednecks.

  5. #5
    Join Date
    Mar 2012
    Location
    TN
    Posts
    223
    Sounds good.:-) I'm not much on CCM ones at all.
    Last edited by dodge3500; 01-26-2014 at 10:11 AM.

  6. #6
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,793
    I know what he is up to and I approve!

    "I'm not happy unless you're not happy"

  7. #7
    Quote Originally Posted by Laku View Post
    Ideally I'd like adapter for for something like Empire clamping feedneck
    17637_Empire_Clamping_Feedneck_Dust_Black.jpg
    Adapters are out there. Gearheadz paintball makes them

  8. #8
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    900
    forgot to post this up, i'm looking at selling these for about $35-40 for a complete feedneck, ready to mount to your gun. but, in order to do this, i need to get the feednecks, which is the all on my end. i want to make sure that i have them, in hand, before i sell them.

    on Monday, i should be able to post up what i'm thinking of doing. IF there is enough interest.

  9. #9
    Join Date
    Nov 2012
    Location
    Finland
    Posts
    441
    Quote Originally Posted by river031403 View Post
    Adapters are out there. Gearheadz paintball makes them
    Really? Didn't know that. Thanks!

  10. #10
    Join Date
    Feb 2013
    Location
    Indianapolis, Indiana
    Posts
    302
    I'm in the market for a couple. You have my interest, and may have my money depending what the final products "looks" like.

  11. #11
    $35 - $40 is right in the wheel house of what I would expect to pay. In the market depending on appearance and profile (RPG sub-zero being the gold standard in my book).

  12. #12
    Curious to know what you guys dislike about the ccm units? Other than they are not of the cam lock design. I would say the quality is top notch.

    nobody: cant want to see what you come up with. I may buy a few.

  13. #13
    Join Date
    Nov 2012
    Location
    Finland
    Posts
    441
    Quote Originally Posted by Xmagterror View Post
    Curious to know what you guys dislike about the ccm units? Other than they are not of the cam lock design. I would say the quality is top notch. nobody: cant want to see what you come up with. I may buy a few.
    I rather like the no-pro ones. But they aren't as easy to source as the others are.

  14. #14
    Quote Originally Posted by Xmagterror View Post
    Curious to know what you guys dislike about the ccm units? Other than they are not of the cam lock design. I would say the quality is top notch.
    No problem with quality at all. I just don't like that they have CCM printed across them. Just a peeve of mine, unless you're sponsoring me, I don't want your logo's all over my markers.

  15. #15
    Join Date
    May 2007
    Location
    Fox Paintball Territory
    Posts
    777
    I agree with PGOP. RPG Sub Zero is the standard to me. If it is better then I would be interested in one.

  16. #16
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,492
    Is AKA and A+ no longer making them? AKA are IMO one of the best around and they're only $20+ shipping: http://www.akalmp.com/feedtubes.html. A Plus is still selling theirs as well for $ 30: http://www.aplusp8ntball.com/camlocks.html. While its always nice to have options, IMO $40-50 is well past market considering you can get the CCM ones for like $25...

    My .02.

  17. #17
    Join Date
    Nov 2012
    Location
    Finland
    Posts
    441
    Quote Originally Posted by OPBN View Post
    Is AKA and A+ no longer making them? AKA are IMO one of the best around and they're only $20+ shipping: http://www.akalmp.com/feedtubes.html. A Plus is still selling theirs as well for $ 30: http://www.aplusp8ntball.com/camlocks.html. While its always nice to have options, IMO $40-50 is well past market considering you can get the CCM ones for like $25...

    My .02.
    At least the email that's associated on A+ paypal account was invalid when I tried to buy one of theirs, which makes it a bit risky/fishy on my book.

  18. #18
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,198
    Can we have them say AO Army?

    Either way, im in.

    To leave feedback: Click seller/buyers name, Click feedback score, Click leave feedback

  19. #19
    Quote Originally Posted by Laku View Post
    At least the email that's associated on A+ paypal account was invalid when I tried to buy one of theirs, which makes it a bit risky/fishy on my book.
    That and most of the images on there website are broken. The AKA's look nice though.

  20. #20
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,492
    Quote Originally Posted by Patron God of Pirates View Post
    That and most of the images on there website are broken. The AKA's look nice though.
    I have several of them and love em. I actually replaced all of my CCM ones with them. Only downfall is they only come in polished black.

  21. #21
    Join Date
    Oct 2004
    Location
    Daniel Island, SC
    Posts
    1,386
    Quote Originally Posted by Patron God of Pirates View Post
    No problem with quality at all. I just don't like that they have CCM printed across them. Just a peeve of mine, unless you're sponsoring me, I don't want your logo's all over my markers.

    did you try calling ccm to see if they would sell one with out a logo.

  22. #22
    Honestly the thought never occurred to me.

  23. #23
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,492
    Quote Originally Posted by Patron God of Pirates View Post
    Honestly the thought never occurred to me.
    Ive bought a couple of them through SSP Reaper here. If you contact CCM, they will sell them to you sans logo.

  24. #24
    I like the A+ feednecks too. Only place to reliably buy them new is eBay when they list a slew of them from time to time.

  25. #25
    Join Date
    Aug 2001
    Location
    WI.
    Posts
    1,321
    Quote Originally Posted by Patron God of Pirates View Post
    No problem with quality at all. I just don't like that they have CCM printed across them. Just a peeve of mine, unless you're sponsoring me, I don't want your logo's all over my markers.
    they will accommodate you if you ask them. Find your own lazer guy if you choose to do so
    BEZERKERS
    ALL MAG SHOOTING TEAM

  26. #26
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,198
    Love it.

  27. #27
    Quote Originally Posted by Laku View Post
    At least the email that's associated on A+ paypal account was invalid when I tried to buy one of theirs, which makes it a bit risky/fishy on my book.
    I bought a few from them a couple months ago. I thought the same thing and even talked with paypal after finding the email address and phone number not working. They were initially responsive to paypal, and then later they were to me. He stated that he had separated some of the businesses he had and that it hadn't been updated on his website. Art is the owner and told me that he had sold off his anodizing business, but still has the paintball and machining. I received everything very fast. A little unnerving to not have the contact info working, but he told me that he would have his web guy fix everything.

    I know you can reach him at this email since it was the one he was communicating to me about a month or so ago

    aplusmachine@comcast.net

    I'm hoping this post is taken more of information to a fellow member, rather than deflating the heart of Nobody and his inquiry of selling a future product. I for one love options of quality items, and I'm anxious to see what you have in store.
    Last edited by barkingspider; 01-26-2014 at 06:54 PM.

  28. #28
    Join Date
    Apr 2005
    Location
    Rockland County
    Posts
    507
    I'd be down for at least one, doug (I'm trying to cut down on projects and markers, a bit)

  29. #29
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    900
    here's what i've been doing with all the stock ULE feednecks as it sits on my Emag


    the feedneck


    and my adapter as it sits on the body


    so Laku, you win an eCookie

    so what y'all think? any and all questions will be answered.

  30. #30
    Join Date
    Apr 2005
    Location
    Rockland County
    Posts
    507
    Wow, that's nice

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •