Results 1 to 7 of 7

Thread: interesting halo hopper problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2013
    Location
    now broiling in Ok.
    Posts
    1,180

    interesting halo hopper problem

    the hopper actually had too much pressure on the stack not letting the ball drop into the barrel

  2. #2
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    238
    Powerfeed with the old style PF plug?

    If so, I could see how that might happen.

    Any more details?

  3. #3
    Join Date
    Aug 2013
    Location
    now broiling in Ok.
    Posts
    1,180
    exactly, classic rt

  4. #4
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    1,956
    Hmmmm.

  5. #5
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    238
    I've run into this issue before with my classic rt.

    The old style pf plugs had a little flat spot that the ball would rest on sometimes when there was enough force on the ball stack, and it would just sit there rather than turn the corner into the breech. AGD redesigned the plugs to have a little ramp instead of the flat. First thing I would recommend is to check to see if your pf plug is the old or new style.

  6. #6
    ^This^
    You need the 'parabolic' feed plug. I had the same problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •