Results 1 to 14 of 14

Thread: Xmag CCM Feedneck Breech Mods

  1. #1
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,875

    Xmag CCM Feedneck Breech Mods

    Remove your stock crappy feed cup and replace it with a CCM clamping feedneck. Tried and true, I have done more of these now that I can even remember. Can be done on ANY Xmag or SFL breech.


    ^Old Euro style breeches shown with dual detents and added set screws*

    -Semi permanent, non removable. Can be take apart and replaced for anno
    -Compatible with single or dual detents.
    - Available in either the 1.5" cup (shown) or 1" short rise cup.

    $75 per breech. Includes either type of CCM feedneck in gloss or dust finish and color of your choice. +for return shipping.

    *Add $25 for SFL/Non CNC breeches that have dual detents and need set screws drilled and tapped.

  2. #2
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,875
    1" feedcup on my Xmag


  3. #3
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    Woot Woot!!! So.. I want one..

    Does this include the breech? Or is this a send to you and you pull the old, push the new one and send it all back?

    either way works for me. Do you happen to have any "extra" vert breeches that I could buy and just have this done so I can keep my stock one? Prefer a CNC breech. But would take a plain one.

    DM

  4. #4
    Join Date
    Mar 2002
    Location
    VA
    Posts
    2,258
    I can vouch for this service. BigEvil is one of the only guys I can trust with my breaches. I trust him with my coveted SFL breaches as well as a handful of my Euro Xmag breaches in the past. He knows exactly what to do

  5. #5
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    Hey Bunny.. I PM'd ya a bit back...

    Can I get a breech or two from ya??

    No feedneck needed.

    DM

  6. #6
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,875
    I WISH I had a stash of breeches laying around.

    Service includes swapping out the old one and installing a new one, just in case I wasn't clear.

    DM hit me up anytime.

  7. #7
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    I thought that's what it was. Just making sure. Do you supply the feedneck?

    And yeah... if I can get a CNC breech from Bunny I'll have you do it. May keep the stock one just because. But if not, then I'll send you the original to have it done.

    DM

  8. #8
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,875
    Quote Originally Posted by DevilMan View Post
    I thought that's what it was. Just making sure. Do you supply the feedneck?

    And yeah... if I can get a CNC breech from Bunny I'll have you do it. May keep the stock one just because. But if not, then I'll send you the original to have it done.

    DM
    Yup, If I dont have it in stock at the time I get them.

  9. #9
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    grovy.. works for me. I'll take a 1" one I'm thinking... I like the look of the low profile. It holds a rotor properly right?

    can/do you have a dust black one?

    DM

  10. #10
    Join Date
    Mar 2002
    Location
    VA
    Posts
    2,258
    At the moment I do not have any more breaches for sale. Most of the breaches that I bought from AGDE are not functional. I'm working on a solution though, but it will be a while. I do have extra "Xmag" feed tubes available if you would to have both the old version and the CCM version if you decided to re-anodize them.

  11. #11
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,875
    It should hold a rotor just fine, holds everything else but I could get some pics of my other various loaders in the short cup for you guys.


    Quote Originally Posted by DevilMan View Post
    grovy.. works for me. I'll take a 1" one I'm thinking... I like the look of the low profile. It holds a rotor properly right?

    can/do you have a dust black one?

    DM

  12. #12
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    911
    just remember, this is the guy that not only does fabulous work, but will treat your guns better than his own. if you have an Xmag, and want something that can clamp, then save up, contact BigEvil and take care that you will get what you are asking for.

  13. #13
    Join Date
    Sep 2005
    Location
    Charleston SC
    Posts
    1,185
    Been meaning to get mine to you for years now. I'll have to PM you a question concerning ano.

  14. #14
    Join Date
    Nov 2013
    Location
    Austria
    Posts
    66
    Hi there,
    I need two of those breeches with a CCM feedneck please!
    I have one breech here (raw, no ano) from which I already took out the old feed cup (it has the two set screws) - that on I can send you for the mod (no CCM Feedneck though)
    Is there a chance to get a second complete one from you (breech + CCM feedneck). In this case also a "raw" one (no ano, or color).
    Would be GREAT if you could help me out!
    "Little" detail on the side: Im based in Germany - I hope that's not a problem?
    Thanks in advance fro your help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •