Results 1 to 18 of 18

Thread: Micromag with Hyperframe

  1. #1
    Join Date
    May 2007
    Posts
    61

    Micromag with Hyperframe

    I have a micromag that I picked up and kept as a backup. Used it once while Big Evil was tuning up my Tac-1, and then she went back in the closet. Just grabbed a q-bow which will be my new backup and went to shoot the micro and ensure she was working and the valve seems stuck. New battery on the hyperframe, changed out the bumper because that seemed to be sticky and now valve seems stuck( maybe the sear is engaged, don't know) and I don't have the time to mess with it with grad school and a wife of 4 months.

    Here are the pictures and the good news.





    micromag with hyperframe and a rt valve, worked 6 months ago and has been in a climate controlled environment. Comes exactly as pictured with the bike grip and the bigshot barrel. Hyperframe noid clicks so that should be fine. Valve probably needs a rebuild.

    One last bad thing, the srew holding the frame on is in there pretty good. The oringinal owner stripped out the allen so he made a flat head out of it.



    That picture looks worse than it is, but overall it's a 7/10 for looks, it has been played with and needs to be played with again. Great little shooter when I used her she just needs to be back in the wild.

    For trades not really looking for anything but cash, and I might part if everything gets accounted for.

    Price $300 + shipping

    Feel free to ask any questions if you have any. Thanks,
    Andrew

  2. #2
    Join Date
    Sep 2005
    Location
    Columbia, MO
    Posts
    305
    If you'd part this, I'd take the micromag body, ASA, and valve/field strip screw.

  3. #3
    Join Date
    May 2007
    Posts
    61
    I will keep that in mind. Thanks,

    Andrew

  4. #4
    Join Date
    Feb 2014
    Location
    Chester va
    Posts
    49
    I'd be interested in getting the valve if you part it out

  5. #5
    Join Date
    Sep 2005
    Location
    Columbia, MO
    Posts
    305
    Just to be clear, i was claiming Valve and field strip screw

    Quote Originally Posted by blamtro View Post
    If you'd part this, I'd take the micromag body, ASA, and valve/field strip screw.

  6. #6
    Join Date
    Feb 2014
    Location
    Chester va
    Posts
    49
    Got cha dont want to step on toes sorry

  7. #7
    Join Date
    Feb 2014
    Location
    Chester va
    Posts
    49
    Depending on prices I would prob pick up the hyper frame. Just send a pm and we can discuss moneyifyoy decide to break up thanks.

  8. #8
    Join Date
    May 2007
    Posts
    61
    Sounds like a plan, so all we have left is the barrel and bike grip? I might be willing to do that. Give me a day or so to talk to other interested parties and we will go from there.

  9. #9
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    904
    Quote Originally Posted by CaptainMorgan13 View Post
    I don't have the time to mess with it with grad school and a wife of 4 months.

    Thanks, Andrew
    and that's the problem right there. the mag will give you far less problems than the wife. hell, the mag won't get upset if you go finger some other gun's trigger. can't say that about the wife.

    but GLWS. also, to clarify for others, what is the version of Hyperframe? they were available in 12bps and i believe 20bps.

  10. #10
    Join Date
    May 2007
    Posts
    61
    Lol, she's worth it. Hell I have yet to eat a bad meal since she has been around and I am more than hard enough to put up with... the frame is a standard 12, not the 20

  11. #11
    Join Date
    May 2007
    Posts
    61
    From what I've been told I should be able to part everything for around

    Micromag body with Vert ASA: $140
    RT Valve: $100 (in nonworking condition)
    Hyperframe: $120 (for a 13bps board in working condition)
    Bike Grip: $15
    Barrel: $20

    Only problem I have is the screw that was made into a flathead and I can't seem to get out. because of this the hyperframe and the body are together and i'm afraid I will have to drill out the screw. I have a press at work, but really don't want to have to worry about it... so because of that, I will do the micromag, with the vert asa and the hyperframe together for $210 + shipping from 30144. Everything else feel free to offer. Thanks,

    Andrew

    Here are some pictures of everything taken apart.






  12. #12
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,111
    pm incoming
    I need pics of the hyperframe after you have it taken off the body.

    thankyou,
    KNM.
    Last edited by knownothingmags; 02-26-2014 at 10:26 PM.

  13. #13
    Join Date
    Feb 2014
    Location
    Chester va
    Posts
    49
    Pming as well

  14. #14
    Join Date
    Sep 2005
    Location
    Columbia, MO
    Posts
    305
    Given the non working valve and the hyperframe stuck to the body, i am going to pass. GLWS.

  15. #15
    Join Date
    May 2007
    Posts
    61
    Honestly guys I appreciate the offers, but I really don't have time to get everything working. If I spend the time fixing everything the price will go up. Please keep that in mind, my time isn't free and when I might get a hour or two a week it isn't readily available either...

  16. #16
    Join Date
    May 2007
    Posts
    61
    And sold

  17. #17
    Join Date
    May 2002
    Location
    West Coast
    Posts
    3,768
    This had my name all over it so I had to pick it up. Thanks CaptianMorgan13

  18. #18
    Join Date
    Feb 2014
    Location
    Chester va
    Posts
    49
    Looks like it found an awesome home!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •