Sk8ermog Project #2 - Gas Through M86 Trigger Frame - DONE!

[Sk8ermog]

So this was a project I have been wanting to do for awhile and I actually almost finished this within a week.
Here is my original idea pics:

I originally wanted Macro fittings on the outside and inside, but there wasn't enough room. I ended up going with micro line and I had to do some internal milling to make sure the sear didn't hit the air line. I milled the hole on the right side of the frame, but because of the internal plate for a pneumatic kit the hose didn't fit right so I milled another hole on the left side and just went for my reversed Minimag valve. I'm thinking about cutting down the air line, but I only have one long micro line hose so I don't want to shorten it.

I did the "Sleeper" mod myself and I don't think I will ever do that again. I messed up several drill bits to get a hole in my CP on/off at the right angle and large enough for an oring to work correctly. Next time I'll let a professional tackle this mod. I dunked the whole marker in water with air and there were no leaks to my surprise.

Here are the pics of how it is now in working condition:

Just need to get the cross milled into the grips like I wanted and do a nice black or blue paint job. I can almost check this off my list which makes me very happy.

Big shoot-out to cougar20th for getting this M86 frame to market and hooking me up with a great deal for a "blemished" one.

UPDATE 10/13/14

THE SLEEPER PUMP IS DONE!





GO HERE FOR LARGER PHOTOS

Shooting great and looks even better.


If you like this project then check out my other ones.


Sk8ermog Projects:
Project #1: HH Mag
Project #2: Gas Through Grip Frame (DONE)
Project #3: Angel Mag (DONE)
Project #4: Square Mag (DONE)
Project #5: Hawaiian Mag (DONE)
Project #6: MicroEmag
Project #7: Mag Rifle (DONE)
Project #8: NanoMag
Project #9: Double Barrel Mag
Project #10: Coming Soon...