Results 1 to 3 of 3

Thread: hpa and macro line?

  1. #1
    Join Date
    Nov 2013
    detroit, Michigan

    hpa and macro line?

    I run at about 1000 to 1100 psi. and ive blown two macro lines, ive never had this problem before. bad macro? is there any companies that make higher rated macro?

  2. #2
    Join Date
    Jan 2002
    Halifax, N.S., Canada
    Most macro line is only rated for about 300 psi with a burst rating of about 900psi, which is ok for low pressure guns running at 250psi. You can get good macro line, but you have to know what you are getting. It can be in the 625psi range with a burst rating of about 2500psi. Some even higher than that. The good macro line tends to be a bit stiffer and harder to bend. Even the good macro line can get compromised if it gets scratched or kinked.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  3. #3
    Join Date
    Aug 2013
    waiting for winter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts