The next project will be the cheater.
I want to keep this thread on topic though.
Sending money this week. Skip assembly on mine as well.
I think I can follow that. Only part that was bit unclear by just looking at the pictures was where C5 and C6 exactly go, but the text made that clear as well.
I can change that, but all you have to do is follow the red line. Plus there is a note that says where they go.
Take the entire reg assembly and drop it into the fg bottom, exactly how it's stacked in the picture, where do you suppose C5 and C6 will sit...
I'll take mine unassembled
As said, the text made it clear. The red lines were actually the reason why I was bit confused of them before I read where they go. The way I interpeted them by just reading the pictures was that they go both some how below C1 and inside the B5.
Originally Posted by luke
Made changes to the drawings, sorry if I came across as an aSS, I do want things a clear as possible. LMK if there are any oversights or anything confusing about the directions.
Last edited by luke; 06-12-2014 at 03:20 PM.
I finished up the machining on the regs that have been ordered, just waiting for the springs to come in for final assembly..
Does anyone want me to skip assembly so you can send it to anno? I'll be using Loctite 545 instead of Teflon tape, not sure how hard that will be for the anno guy to cleanup. LMK.
OPBN (CURVED, payment pending)
I do have a "shop drawing" function in my program but I've never used it and I can't seem to get it to do what I want. I decided to just do screen captures, will this work for you guys?
All parts will be individually labeled for easy identification and assembly if LPRFG is shipped un-assembled.
LMK if the instructions need tweaked or reworked.
The foregrip top and bottom is assembled and machined together in the same operation (for the profile) in order to get a perfect fit. Do not try and mix and match these if you get two of the same type. They will operate perfectly but there may be small miss-alignments between parts even if they are the same shape. Please let your anodizer know not to mix these up if he gets multiples in. I will ship with the tops and bottoms screwed together but beware not to mix them up somewhere down the line!
Last edited by luke; 06-21-2014 at 08:27 PM.
06-13-2014, 07:52 PM
Here's your LPRs
06-13-2014, 08:10 PM
Whaoooo.:-) woot woot.rdy for some lpr loving.
They look killer man ,great work.
06-13-2014, 09:58 PM
06-20-2014, 03:00 PM
06-20-2014, 03:10 PM
Paypal or USPS Money Order? (You get a discount for cash or money order)
Assembled or un-assembled?
06-21-2014, 12:55 PM
I can gift you on paypal. Like money or do it the hard way and send ya a check. Up to you.
06-21-2014, 03:00 PM
I'll take a curve as well. Unassembled and Money Order here.
06-21-2014, 04:25 PM
Pre-order pricing closes soon!
06-26-2014, 06:50 PM
Springs are here!
I'm going to start packaging and processing the orders after I assemble a few and do the final checks.
I'm going to shoot for delivery on Monday the 30th.
Thank you to the guys that got in on the preorder, it was a very expensive project, I would have been hard pressed to make it happen without your help.
PRE-ORDER PRICING IS CLOSED (6-26-14)
Last edited by luke; 06-27-2014 at 12:45 AM.
06-27-2014, 12:04 AM
06-27-2014, 06:18 PM
OK guys a hit a snag with the one part I purchased. I got the discs from Palmers but they sent the wrong ones. I've had them for a month but never thought to check to make sure they were the correct ones. Anyway I sent them back this morning for an exchange.
07-13-2014, 04:02 PM
Guys. I ran into some issues with the springs I had made, trying to get that figured out.
Also, I've decided to not send these out un-assembled, I just want to to make sure they're working correctly when you get them.
I've had to order another low pressure gauge I managed to blow mine out, looks like it will be Thursday before I can get back on these.
I know most of you have plans to send these out to anno right away, but if at all possible I would like you to (re)test them if possible before sending them to the annodizer. I'm doing all the testing in house that I can, but extra tests with "new eyes" wouldn't hurt with it being a new product.
This project has been a time killer but I'm doing my best to get it done, rest assured it is priority.
Last edited by luke; 07-13-2014 at 08:13 PM.
07-13-2014, 07:55 PM
That's cool man,thanks for update.
07-14-2014, 01:24 AM
No problem. Thanks for the info.
07-21-2014, 01:51 PM
Orders #1-#13 ships today.
All the others are assembled waiting to be tested. I had two air fitting that kicked the can and had to order replacements to finish the testing. I expect the fittings in from Palmers in a few days, the testing will only be an hour or so on the remaining orders.
All LPRs are preset at 60 psi.
07-21-2014, 02:06 PM
07-21-2014, 02:13 PM
awesome. dont forget the mini vert frame i order with my second lpr foregrip.
07-21-2014, 03:44 PM
07-21-2014, 04:25 PM
Orders 1-13 has been shipped, will get the rest out as soon as I get my air fittings.
07-21-2014, 04:41 PM
This I am looking forward too. Thanks
07-21-2014, 05:44 PM
This is the best news a Monday could ever hope for!