I have an automag with standard valve body but has rt guts. The trigger will bounce a couple shots but won't do it consistently. Someone said adjusting the sear rod could fix this. Any truth or tips?
I have an automag with standard valve body but has rt guts. The trigger will bounce a couple shots but won't do it consistently. Someone said adjusting the sear rod could fix this. Any truth or tips?
how much tank pressure are you getting?
I'm running a pure energy hp tank that is around 650 and that must be what's in it the rt on off
First off, you need 8-850+ to properly cycle a Mag consistently. Second, an RT on/off will not make the marker RT/bounce even with the RT on/off.
As for setting the sear rod, it should be sitting about a credit cards thickness from the back of the trigger when the marker is aired up. If its resting on the back of the trigger is may leak, not reset properly. Too far back and it may be tough to get it to properly activate the on/off pin.