Results 1 to 5 of 5

Thread: Field Rental Valve Question

  1. #1
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,517

    Field Rental Valve Question

    Recently got in a Hyperframed Mag that unknowingly had a Field Rental valve. My question is, were there different ones of these? This one is lazered on the top, but has a CFxxxx number on the right side and actually does say "Automag" on it as well.

  2. #2
    Join Date
    May 2001
    Location
    IN -- USA
    Posts
    9,281
    Can't use a Level 10 in a rental valve. The powertube is different than a normal classic valve.

  3. #3
    That all depends on the valve. Some of the newer field rental valves like the ones that came from the mcb aloha mags were normal classic valves that were just stamped field rental on the top. Those can take a lvl x bolt. Older ones cannot. If serial number is cf44xxx or so I would say it will work.

  4. #4
    Join Date
    Nov 2000
    Location
    Milwaukee WI
    Posts
    1,230
    Quote Originally Posted by dano_____ View Post
    That all depends on the valve. Some of the newer field rental valves like the ones that came from the mcb aloha mags were normal classic valves that were just stamped field rental on the top. Those can take a lvl x bolt. Older ones cannot. If serial number is cf44xxx or so I would say it will work.
    ^ I agree

  5. #5
    Mine wouldn't fit the level X, so I tried drilling the hole bigger but ended up destroying it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •