Results 1 to 5 of 5

Thread: cocker wont power up

  1. #1

    cocker wont power up

    tinkering with a super stock autococker i got in a group buy to make sure it works before i sell it. I placed a new 9v battery and it and pressed the button on the grip but nothing happened. I was able to cycle the gun using the button on the worrblade. Any ideas to track the power failure,

  2. #2
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,380
    If you have a volt meter, test the voltage at the board where the battery leads are connected. That way you will know that the battery connection is actually good. Also, check the battery. Sometimes you just get a bad battery.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  3. #3
    Join Date
    May 2010
    Location
    Carlisle, PA
    Posts
    194
    The button pads on those fail. I can almost guarantee that is the problem.
    March 2014 Classic MotM winner - RT Classic

  4. #4
    thanks I'll check that tonight, battery is new and good, powers up two other markers just fine.

  5. #5
    Join Date
    May 2010
    Location
    Carlisle, PA
    Posts
    194
    I dont remember which wired jump to which (I think they might be labeled) but you can test to see if it turns on by jumping the leads on the connector.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •