Results 1 to 25 of 25

Thread: Pneumag Kits & Parts

  1. #1
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956

    Pneumag Kits & Parts

    ALL PACKAGES GO OUT FRIDAYS AND MONDAYS
    shipping cost in the US is 6$ goes out in a small flat rate box, has 50$ insurance and a tracking number.
    prices do NOT include shipping.
    if shipping outside the US pm for pricing.
    preferred method of payment is paypal


    individual parts available for purchase.


    BASIC KIT 44$

    1 X MPA 3 with stainless steel ram finished and cut down, also sides have been flattened.
    1 X MSV2
    2' LP HOSE
    1 X 3/32 CF ROD 1.5" (cut with an abrasive disc on a dremel)
    1 X .118 CF ROD 1.5" (cut with an abrasive disc on a dremel)
    1 X ALUMINUM ROD 3MM 1.5"
    4 X SS 8-32 1/8"
    2 X SS PAN HEAD 6-32 7/16"
    1 X NYLON TIP 6-32 1/4"
    2 X 10-32 1/16" ID STR8 BARB
    2 X 10-32 1/16" ID ELBOW BARB
    4 X 6-32 MIX OF ALLOY & STAINLESS 1/8" SET SCREW
    20151202_194838.jpg
    __________________________________________________ _________
    M86 KIT 44$

    1 X MPA 3 with stainless steel ram finished and cut down, also sides have been flattened.
    1 X MSV2
    2' LP HOSE
    1 X 3/32 CF ROD 1.5" (cut with an abrasive disc on a dremel)
    1 X .118 CF ROD 1.5" (cut with an abrasive disc on a dremel)
    1 X ALUMINUM ROD 3MM 1.5"
    4 X SS 8-32 1/8"
    2 X SS PAN HEAD 6-32 7/16"
    1 X NYLON TIP 4-40 1/4"
    2 X 10-32 1/16" ID STR8 BARB
    2 X 10-32 1/16" ID ELBOW BARB
    2 X 6-32 MIX OF ALLOY & STAINLESS 1/8" SET SCREW
    1 X SET SCREW 4-40 3/16"
    20151202_195016.jpg
    __________________________________________________ _________
    BASIC + KIT 52$

    1 X MPA 3 with stainless steel ram finished and cut down, also sides have been flattened.
    1 X MSV2
    3' LP HOSE
    1 X 3/32 CF ROD 1.5" (cut with an abrasive disc on a dremel)
    1 X .118 CF ROD 1.5" (cut with an abrasive disc on a dremel)
    1 X ALUMINUM ROD 3MM 1.5"
    4 X SS 8-32 1/8"
    2 X SS PAN HEAD 6-32 7/16"
    1 X NYLON TIP 6-32 1/4"
    1 X NYLON TIP 6-32 1/8"
    1 XNYLON TIP 6-32 3/16"
    2 X 10-32 1/16" ID STR8 BARB
    2 X 10-32 1/16" ID ELBOW BARB
    4 X 6-32 MIX OF ALLOY & STAINLESS 1/8" SET SCREW
    1 X MSV2 TRIGGER RETURN KIT
    1 X NYLON TIP 4-40 3/16" SET SCREW
    1 X 4-40 3/16" SET SCREW
    1 X EMAG MAGNET (not pictured, but is included)
    20151202_195354.jpg

    ALL PACKAGES GO OUT FRIDAYS AND MONDAYS
    Last edited by knownothingmags; 01-05-2016 at 12:56 PM.
    I sell new 800 mah Emag batteries, in dealers section, or pm for pricing.New batch to come in soon.

  2. #2
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    ALL PACKAGES GO OUT FRIDAYS AND MONDAYS
    Custom kits available
    pm for pricing

    the mpa3 in the organizer are sold complete with ram and cut to size.


    __________________________________
    A: 6-32 X 3/16" ALLOY STEEL AND SS SET SCREWS $.25 EACH
    B: 6-32: 1/8", 3/16", 1/4" SS NYLON TIP SET SCREWS: $2 EACH
    C: 6-32 X 1/8" ALLOY STEEL SET SCREW $.25 EACH
    D: 8-32 X 1/8: SS SET SCREWS $.25 EACH
    E: MPA-3 COMPLETE CUT TO LENGHT AND SS RAM INSTALLED $15 EACH
    F: SS RAM FOR MPA3 $4 EACH
    G: MSV-2 PAN HEAD MOUNTING SCREWS $.25 EACH
    H: 90* ELBOW BARB AIR FITTING FOR 1/16 ID TUBING $.75 EACH
    I: MSV-2 $15 EACH
    J: 4-40 X 3/16" NYLON TIP SS SET SCREWS 2$ EACH
    K: 4-40 X 3/16" ALLOY STEEL SET SCREWS $.25 EACH
    L: MSV-2 MAGNET TRIGGER RETURNS, NO GLUE NEEDED MOUNTS WITH MSV-2 $5 EACH
    20151202_184253.jpg
    M: 4-40 X 1/2" CAP HEAD SCREWS $.25 FOR 2
    N: STRAIGHT BARB AIR FITTING FOR 1/16" ID TUBING $.75 EACH

    3/32" X 1.5" CF TRIGGER ROD $1 EACH >>>>>>
    .118" X 1.5" CF TRIGGER ROD $1 EACH >>>>>>>>> or 1 of each for $2.50
    3MM(just under 1/8" diameter) x 1.5" aluminum rod $1 EACH >>>>>>

    1/16" ID LP tube $.75 Per Foot

    EMAG MAGNETS $2 EACH
    20151202_182908_resized.jpg

    MSV-2 MAGNET TRIGGER RETURN $2 EACH
    20151202_182932_resized.jpg

    white plastic trigger rods 3mm x1.5" $1 EACH
    20151214_195213_resized.jpg
    ALL PACKAGES GO OUT FRIDAYS AND MONDAYS
    Last edited by knownothingmags; 12-16-2015 at 09:14 PM.

  3. #3
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    these currently are not stocked items
    but I have
    4 large style adjustable elbows $2.5 each
    elbows.jpg
    4 solid metal elbows$2.5 each
    solid elbows.jpg
    2 MEV-2. $6 each
    mevs.jpg
    Last edited by knownothingmags; 12-04-2015 at 04:06 PM.

  4. #4
    Join Date
    Mar 2012
    Posts
    323
    I'll take 3
    L: MSV-2 MAGNET TRIGGER RETURNS, NO GLUE NEEDED MOUNTS WITH MSV-2 $6 EACH

    Do I understand correctly, I'm wanting your magnet return printed parts with the screw and two magnets. This is $6 for a set?
    Last edited by barkingspider; 12-02-2015 at 09:03 PM.

  5. #5
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by barkingspider View Post
    I'll take 3
    L: MSV-2 MAGNET TRIGGER RETURNS, NO GLUE NEEDED MOUNTS WITH MSV-2 $6 EACH

    Do I understand correctly, I'm wanting your magnet return printed parts with the screw and two magnets. This is $6 for a set?
    yes I forgot to update the price they are 5$ each

    yes you get the two printed parts, the cap head screw and 2 magnets for 5$

  6. #6
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    2,185
    As a schmuck to pneu mags. But with a good understanding of pneumatics. Is everything in the actual kits to build a pneu out of an existing automag other than the LPR?

  7. #7
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by blackdeath1k View Post
    As a schmuck to pneu mags. But with a good understanding of pneumatics. Is everything in the actual kits to build a pneu out of an existing automag other than the LPR?
    yes,
    you will need an lpr hooked up to your automag to supply this kit with the low pressure air needed.
    and a frame that will accept the kit.
    there are threads out there on this.

  8. #8
    Join Date
    Sep 2004
    Location
    time to make a slurpee!
    Posts
    1,725
    Nice kit Ryan. . . . . . .

    . . . . .but I cut my ram side to fit!
    ......You know you want one!!

  9. #9
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by Loguzzzzzz View Post
    Nice kit Ryan. . . . . . .

    . . . . .but I cut my ram side to fit!
    I guess I will have to do that then?
    just have to see.
    if it is demanded of the kits I will do it.

  10. #10
    Join Date
    Dec 2013
    Posts
    12
    Pm'ed

  11. #11
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by Firstborn View Post
    Pm'ed
    responded

  12. #12
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    post number one updated.
    sides of mpa3 housings have been flattened to help aid fitment inside frames

  13. #13
    Join Date
    Dec 2009
    Location
    Austin, TX
    Posts
    272
    I'll take a

    BASIC + KIT 52$

    Thanks

  14. #14
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by Stedspitcher View Post
    I'll take a

    BASIC + KIT 52$

    Thanks
    responded

  15. #15
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    3mm x 1.5" trigger rods added to stocked items.

  16. #16
    Join Date
    Sep 2015
    Posts
    25
    image.jpg image.jpg
    What would u recommend for this frame thanks

  17. #17
    Join Date
    Dec 2004
    Location
    Tampa, hot & humid.....
    Posts
    6,062
    Is that an old Angel frame ?
    When injustice becomes law resistance becomes duty

  18. #18
    Join Date
    Sep 2015
    Posts
    25
    Yes

  19. #19
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by Crazy4mad View Post
    image.jpg image.jpg
    What would u recommend for this frame thanks
    I would basic or basic +

  20. #20
    Join Date
    Sep 2015
    Posts
    25
    Thanks im planning on mounting a lpr on my bottom asa and running line back into grip frame

  21. #21
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    no problem.

    plenty of kits and parts left

  22. #22
    Join Date
    Jan 2002
    Location
    Gurnee, Il
    Posts
    410
    Will your kit work on an intili frame?
    Chupas

    Shakira series YO-Mag. Purple to black fade
    Yo Boy for life


  23. #23
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    Quote Originally Posted by Chupas2 View Post
    Will your kit work on an intili frame?
    pm responded to.

  24. #24
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    still available many left.

  25. #25
    Join Date
    Apr 2010
    Location
    South Dakota
    Posts
    3,956
    ttt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •