Results 1 to 8 of 8

Thread: warp feed style detent setup

  1. #1

    warp feed style detent setup

    If anyone has an x-mag could you be so kind to tell me where the detent is in relation to the center of the paint inside the breech? I know the detent is on top, I'm not sure as to how far it is from the centerline of the ball location. I have a warp feed left project that might work if I get a detent setup properly. thanks to anyone that can help, -Rickenmag22.

  2. #2
    Join Date
    Apr 2010
    Location
    Near Toronto, Canada
    Posts
    752
    I can't check this second, but what are you trying to do? Add a second detent?

  3. #3
    Join Date
    Feb 2005
    Location
    Soon to be the Dirty jErZ
    Posts
    8,814
    Same as the centerfeed....

  4. #4
    I already made a classic body warp feed, problem is the docs automag barrel adapter is stuck inside it, I was hoping I could install a detent on top of the body, just like the x mag warp left breech is set up.

  5. #5
    Join Date
    Jul 2016
    Location
    Tucson, Arizona
    Posts
    98
    You could use the lightest loc-tite on a barrel you don't much care for, let it dry into the adapter and take them out?

    Is it seized in the body? The barrel retention thing is pressed into the rail, meaning the adapter would slide out if you remove the body from the rail, assuming it's not seized?

    Jim
    yes, i could have purchased something new for the same money.

  6. #6
    I'm pretty sure it's seized, I'm thinking it would be easier to just get an xmag then restore it. I love the classic rt, but I don't even know if a ball detent will work?

  7. #7
    Is there anyone else that could help or give advice?

  8. #8
    Join Date
    Nov 2012
    Location
    Finland
    Posts
    869
    So just to make sure. You have removed the rail and tried to get the adapter out?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •