Z2 Grip Project

[luke]

Target price on the frame is $200 (total)
Shipping will be added on the final bill.

Frame will include the following:
*Ultra ULE milling
*New Blade Trigger (not my old design)
*Trigger Pin (set screw design)
*Safety Assembly
*ULEd grip panels
*T-Rex ready machining
*Hidden LPR machining
*Magnet trigger return machining
*Hardware
*This frame is compatible with twist lock barrels but the frame wont be drilled for the twist lock. However it will come 'spot drilled' in the correct location for anyone that wants to drill it themselves.

Deposits are non refundable or transferable. If I cancel the project full refunds will be made.

1. Salad Fingers ($100)
2. mwerne04 ($200)
3. mwerne04
4. awo702 ($100)
5. crazedloon ($100)
6. lynxkcg ($100)
7. jaredboy23 ($100)
8. djinnform ($200)
9. kim phan ($100)
10. bowcycle ($100 1st payment) ($100 2nd payment 2/27/18)
11. Walking Stick ($100)
12. JimBobFett ($100)
13. Wetwrks ($100)
14. CalledFollower ($100)
15. RehKal ($100)
16. Gabehcoud ($200)
17 yadoo ($200)
18. mh53eplt ($100)
19. mh53eplt ($100)
20. Za_hulk ($200)
21. Mueller ($200)
22. ikillforwork ($100)














T-Rex and P90 LPR Kit $170 with the purchase of the Z2

[going_home]

Interesting.

[lynxkcg]

Sent, can't wait to put together another gun for this.

[Salad Fingers]

That’s me (RUN100) ... payment sent! Thanks again!

[luke]

That’s me (RUN100) ... payment sent! Thanks again!

Got it, thanks.

[mwerne04]

I'm in!

[luke]

I'm in!

Thanks

[CalledFollower]

This would be a self contained Pneu setup with the hidden LPR and TRex mod, correct?

[luke]

This would be a self contained Pneu setup with the hidden LPR and TRex mod, correct?

Yes it will be mechanical or pneumatic. It will come with all the necessary machining to add the T-Rex and the P90 LPR I'm currently working on. (Or you can still use a lpr of your choice, but you'll be missing out on some new stuff. )

[awo702]

Deposit sent for mine.


Sent from my iPhone using Tapatalk

[luke]

Deposit sent for mine.

Got it, thanks

[crazedloon]

Deposit sent

[jptheripper]

Luke does this have a flat top and can it be reemed out for the larger banjo of the rt classic?

[luke]

Luke does this have a flat top and can it be reemed out for the larger banjo of the rt classic?

This will have the flat top (wingless) it can be drilled for the banjo bolt to run mechanical but it wont be T-Rex compatible. The strike face of the RT sear is different from a standard mag and it's a small enough amount that wont allow two mounting tabs. Redesigning the T-Rex would be easy enough but the trade off would be it would then only work in my frames. Most of the existing frame mods would be off the table.

[luke]

Edit to first post:

No drawings have been done yet, when we get 10 preorders I'll get started on the cad work and get it released for review. (As discussed on MCB) Z grip production will be scheduled behind the current project(s).

I've received several messages and emails, there seems to be a little misunderstanding about the '10 frames' on the preorder, it's neither a cut-off or the desired number for production. I only said '10' to get the design started and posted to get some feedback. I'm neck deep in 3 other projects and need to see them through before I start this. It's not my intention to drag this out but I hope to get the preorder numbers up so it's not a waste of time.

I hope this makes a little better sense.

Were off to a good start, thanks guys.

[Grelvire]

I'm down for this, can't send deposit til after Christmas......

[knownothingmags]

so no drawing yet or render?
and you already have money in hand?

[luke]

so no drawing yet or render?
and you already have money in hand?

That's a fact. The people hiring me to do the project trust that I will come through or refund their money in full. Is that a problem for you?

[luke]

I'm down for this, can't send deposit til after Christmas......

That wont be a problem.

[knownothingmags]

no problem, you just usually have pics or renders before you start stuff.
just seemed out of the norm.
was just checking.

have fun, z grips are neat to make.
I love the one that was made that I have.
custom zgrips can have a lot in them.
mine is very versatile.

[luke]

no problem, you just usually have pics or renders before you start stuff. just seemed out of the norm. was just checking.

If you read the first post in it's entirety it lays it all out.

[luke]

I would be open to you guys naming the new frame, typically I use the name that I choose when I name the cad file. Since we're not that far, I'm open to suggestions, something that distinguishes this from the original.

[lynxkcg]

Z-rex.

[knownothingmags]

New z grip

Sent from my SM-G930V using Tapatalk

[Salad Fingers]

Zed or Zenith

[Mista Jibs]

I don't think we are going to top Z-Rex

[alpha_q_up23]

Lc Zephyr Frame, or the LcZ Frame for short.

[Korso]

Raw or annoed black/dust black?

[knownothingmags]

The slizz

Sent from my SM-G930V using Tapatalk

[Grelvire]

z-rex.

ftw