LcMP90

[luke]

Order here >> http://lukescustoms.com/lc-mp90.html

The MP90 frame project is completed, frames are ready to ship as of 2/26/18





Includes:
*Grip Frame
*3D ULEd Grip Panels w/screws
*Safety Assembly
*Choice of triggers (None Pneumag set up) Argo, Acis, or Katana
*Trigger pin and install hardware
*Trigger return magnets
*Optional Pneumag parts

[Apathetic_Chaos]

Hopefully I can send cash in a few weeks, super excited for this project.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Apathetic_Chaos]

The MP90 project got bumped to the top, production starts tomorrow 2/15/18





LcMP90 $200
Includes:
*Grip Frame
*3D ULEd Grip Panels w/screws
*Safety Assembly
*Choice of triggers (None Pneumag set up) Argo, Acis, or Katana
*Trigger pin and install hardware
*Trigger return magnets

Attachment 95745

With the purchase of the frame I'll offer a Pneumag kit (Discounted $35) for $170
Kit includes:
*T-Rex
*P90 LPR
*LP hose and necessary install parts and hardware
*Ultra Blade Trigger (Pnemag Only)

LcMP90 (frame only) $200
Shipping Priority Mail $9.00
Total Due $209

OR

LcMP90 $200
Pneumag Kit $170
Shipping Priority Mail $9.00
Total Due $379

Add $35 for CP ASA Sleeper Mod
Attachment 95733


I'll only accept gifted payments for listed prices.
Send to lukescustoms@yahoo.com
Include your AO name and parts ordered.

Full refunds if the project does not complete for unforeseen reasons.
PM me your mailing address.

Is that a dovetail on the bottom of the frame, or just the way the light is hitting it?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[luke]

Not a dovetail but a small round over.

[Apathetic_Chaos]

Not a dovetail but a small round over.

Any chance a dovetail can be added when I order one? Just curious if I can mod an ASA I have for the pneumag, or if I'm better off buying a CP.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[luke]

Sure a dovetail can be added but I cant make any guarantees your mod will work.

[Apathetic_Chaos]

Sure a dovetail can be added but I cant make any guarantees your mod will work.

Understood, but worst case scenario I'm out a ASA that I wasn't using and I need to buy a CP for you to mod, so I really have nothing to lose in trying it

Sent from my SAMSUNG-SM-G930A using Tapatalk

[luke]

Any chance a dovetail can be added when I order one? Just curious if I can mod an ASA I have for the pneumag, or if I'm better off buying a CP.

How do you plan on making the seal between the dovetail ASA and the bottom of the grip frame?

[Apathetic_Chaos]

How do you plan on making the seal between the dovetail ASA and the bottom of the grip frame?

The previous frame I had used a rubber seal that sat inside the fitting on the LPR, the seal was made when the LPR was screwed in all the way.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[JimBobFett]

O ooo, how did I miss this until now!?! Take mah money!!! Gotta pre order this post haste.

[luke]

Frames are done and shipping as of 2/26/18

[mobsterboy]

Guess I have to get one...

[luke]

Sale ends tonight at 10 PM AZ time.

[mobsterboy]

I've been wondering which year that March 3rd is on a Friday...
So 2023 this sale will end

[dahoeb]

Hey Luke...
I'm starting another Armada mag build but will probably drag it out for most of the year, maybe into next year depending on life. I'm planning on using this frame....are these going to be a limited run then done...or can I expect these to be around for at least a few more months?

[luke]

They should be around for awhile..

[tucson.az.jbreen]

Quick question. Assuming I send you an asa for the sleeper mod, is this set up easily interchangeable with a standard mech set up?

I'm imagining switching back and forth at the field. Would it be practical?

[luke]

Quick question. Assuming I send you an asa for the sleeper mod, is this set up easily interchangeable with a standard mech set up?

I'm imagining switching back and forth at the field. Would it be practical?

If you're just switching out grip frames at the field all you would have to do is put the sear rod back on the sear and install the grip frame.

If you want to switch out the Pneumatics and run the MP90 in Mech mode, you would need to remove the T-Rex (One screw) reinstall the sear rod and turn the LPR OFF and your good to go. You can leave the LPR in the frame and still run the modded CP in mech mode.

[luke]

Where are those MP90 frame builds? I'd love to see some.

[Apathetic_Chaos]

Where are those MP90 frame builds? I'd love to see some.

A little bit left to go, but I'm getting there soon.

Sent from my SM-G960U using Tapatalk

[luke]

Nice! Is this a mechanical setup?

[awo702]

Where are those MP90 frame builds? I'd love to see some.

Oh man, I can’t wait to ano mine. I’m holding out for the body I want though.
[cough cough. Armada]


Sent from my iPhone using Tapatalk

[luke]

Oh man, I can’t wait to ano mine. I’m holding out for the body I want though.

I hear you, but I've been sitting on 50 slug Uni-bodies for a few years now. The past week or so I've been contemplating a few designs for those, that's a big investment just collecting dust. But yea, for sure, standard slug bodies are right at the top of the list too. LOL

You have a rail for that right? I just sold the last one a few days ago..

[awo702]

Apathetic_Chaos’s MP90 builds lookin sick. Love the matching tank.


Sent from my iPhone using Tapatalk

[Apathetic_Chaos]

Apathetic_Chaos’s MP90 builds lookin sick. Love the matching tank.


Sent from my iPhone using Tapatalk

Thank you, just gotta do a few parts in gloss and mill out the room for the oring in the Bob Long ASA to sleeper it. Then I'm a trex away from completion.

Sent from my SM-G960U using Tapatalk

[luke]

Thank you, just gotta do a few parts in gloss and mill out the room for the oring in the Bob Long ASA to sleeper it. Then I'm a trex away from completion.

This is by far my personal favorite frame ever made for the Automag, yes, most definitely bias but still the truth!

I rarely get a chance to see what you guys are building, I love all the varieties you guys come up with, love the build btw.

Have you had a chance to take it to the field yet?

[Apathetic_Chaos]

This is by far my personal favorite frame ever made for the Automag, yes, most definitely bias but still the truth!

I rarely get a chance to see what you guys are building, I love all the varieties you guys come up with, love the build btw.

Have you had a chance to take it to the field yet?

Unfortunately not, tried to take it out one day and I got rained out, since then I had the ASA drilled put, so I haven't even gassed it up recently and really cant until I mill put the oring section. Hopefully I'll be all set to head out with it in a few weeks.

Sent from my SM-G960U using Tapatalk

[Pizza_Monger]

Would love to get the new grip frame. Especially the limited “LC”.
Do they fit on a standard ule rail?
Does it require the sleeper t-Rex setup?

Sorry for the newb questions.

[luke]

Would love to get the new grip frame. Especially the limited “LC”.

Four more in stock

Do they fit on a standard ule rail?

Yes

Does it require the sleeper t-Rex setup?

No, the pneumatics are not necessary to run the MP90.
MP stands for Mechanical or Pneumatic.

Sorry for the newb questions.

No worries

[Mps18]

So if i get the mp90 and the cp asa do i have to send it in for the mod?