Results 1 to 11 of 11

Thread: i need help dying my warp

  1. #1
    speedball4life Guest

    i need help dying my warp

    ok i got the rit dte and i was taking apart the warp then i got to the cervo and board and realized that i cant get them out of the warp unless i rip the wire off of the board or cervo and then soder it back on when im done dont really feel like sodering it so anyone have any ideas. tell me how you have done it. i know people have done it because i have seen people talking about dying theres please help me!!!!

    thanks to all that help

    chris

  2. #2
    speedball4life Guest
    UP I NEED HELP FAST

  3. #3
    Join Date
    Feb 2001
    Location
    Where the beer is deep. The forest is funny colored. Cloud nine is a thought away.
    Posts
    2,321
    Just dye the out side shell, no one sees the inside shell..
    AO #765
    CCM Series 5
    Prerelease Impulse
    Hyperframed Warped Mag w/flatline tank
    Feedback.


    Good to know that somone of Tom's status seeks "relief" from a sport he helped create. A sport now ruled by a single patent.

  4. #4
    speedball4life Guest
    i guess they dont if they dont look at the warp but i want to dye the whole thing up

  5. #5
    Join Date
    Dec 2001
    Location
    New Hampshire
    Posts
    943
    Your gonna have to do the soldering. It's time to learn anyway. Do I sound like a dad? I can't help it.
    Thanotos

    http://www.factcheck.org

  6. #6
    Join Date
    Oct 2000
    Location
    North Plains, OR
    Posts
    4,956
    Everyone that dyes their shells with RIT dye end up taking out the board, motor and all other parts. It's just something you have to do. If you don't want to do it, then see if you can find someone that knows how to solder. They don't have to be really good at it, just competent enough to hold it on the connection until the solder melts and then pull the wire out. All that needs to be disconnected are the two wire leads going to the motor. The wires for the 9v snap stay on.

  7. #7
    Join Date
    Nov 2001
    Location
    TN
    Posts
    2,754
    i would juz buy a shell...
    Someone took away my cool sig. *cough*mod*cough*

  8. #8
    speedball4life Guest
    i can solder so i dont have to learn but i did that and it worked thanks for the coments.

  9. #9
    Join Date
    Jul 2001
    Location
    spring hill, florida
    Posts
    1,546
    Originally posted by paintbattler
    i would juz buy a shell...

    hahahahahaha
    [thinks]65 dollars for the shells[/thinks]

    [thinks]1.28 for rit dye??[/thinks]

    dying will just have to do oh yeah how do you get the sensor out if yuo leave it in will it ruin it or just let it dry??? i am dying my warp to so i would like to know.

    up up up
    good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27

  10. #10
    Join Date
    Oct 2000
    Location
    North Plains, OR
    Posts
    4,956
    If you have one of the old style Warps, you can knock out the rivet through the screw hole for the back plate. That is if your sensor is cut on one side. If the sensor is completely round and has it's own hole for the rivet to go into, then you need to drill it to get it out. That requires getting a new rivet. You can dye it with it in there and dry it out, but the best thing to do is take it out. Depends on what you can do. I'd just setup intellifeed on your gun and not worry about the vib sensor.

  11. #11
    Join Date
    Jul 2001
    Location
    spring hill, florida
    Posts
    1,546
    Originally posted by BlackVCG
    If you have one of the old style Warps, you can knock out the rivet through the screw hole for the back plate. That is if your sensor is cut on one side. If the sensor is completely round and has it's own hole for the rivet to go into, then you need to drill it to get it out. That requires getting a new rivet. You can dye it with it in there and dry it out, but the best thing to do is take it out. Depends on what you can do. I'd just setup intellifeed on your gun and not worry about the vib sensor.

    well right now i am running an intellifeed so i only have to unsolder the wires going to the servo and i will just let the vib dry out my cuz hasn't got his i-frame yet so he can either punch it out or let the vib dry and how do you reuse a rivit??????

    i edited because mac's keyboards suck and i misspelled every other word (i am at my cousin's)

Similar Threads

  1. Dying a Warp Feed?
    By Ultimator in forum Paintball Talk
    Replies: 6
    Last Post: 10-21-2002, 03:49 PM
  2. Chopping like crazy with Warp this weekend.
    By luke in forum Automags - Tech Forum
    Replies: 14
    Last Post: 04-08-2002, 12:50 PM
  3. *****Hydrogen Bomb Thread*****
    By AGD in forum Paintball Talk
    Replies: 160
    Last Post: 01-16-2002, 07:59 PM
  4. Dying my CLEAR warp SMOKE?
    By Ball Buster in forum Paintball Talk
    Replies: 9
    Last Post: 10-27-2001, 09:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •