Results 1 to 3 of 3

Thread: Do hyperframe on/off pins make trigger softer?

  1. #1
    Join Date
    Mar 2002
    Location
    Olathe, KS
    Posts
    13

    Do hyperframe on/off pins make trigger softer?

    Read the article below about the hyperframe and then i have a question about it. Could you use a hyperframe on/off pin to reduce the stiffness in the trigger pull?

    I got this from apg:
    The reason for changing the stack pin is efficiency. The HyperFrame solenoid is optimized for efficiency with a 9-volt battery and has a particular amount of "push power". The regulated air inside the marker pushes against the stack pin. The "push" on the pin depends on the air pressure and the diameter of the pin. The factory stack pin diameter and the working pressure of the Automags results in a pressure that is just above the optimal range of the HyperFrame solenoid. The smaller stack pin drops the "push" into the working range of the HyperFrame solenoid. Suggestion: put the stack pins you have into labeled containers so you know which is AGD standard, HyperFrame, or RT, because the differences are not readily apparent, even with a magnifying glass.
    Hey check out my package!

  2. #2
    Join Date
    Jul 2001
    Location
    Mission Viejo, CA, USA
    Posts
    779
    i have done this and it is lighter, all you have to do is tap it and it shoots, its really easy to shoot bursts

    that said it blows because every other shot shortstrokes due to the nature of the on off. its ment to be an electrical pulse solenoid powered on off. it works really good with the hyperframe but with a finger it isnt so good.
    -Minimag Body HR
    -Retro Valve
    -Z grip with extender
    -12V X-Boarded Revvy
    -6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
    -68/3000 Flatline

  3. #3
    Join Date
    Oct 2000
    Location
    Las Vegas, NV
    Posts
    7,104
    Tapered on/off pins lower effort needed. RT Pro on/off pin is like this too.

Similar Threads

  1. rough sketch of my new trix style viking/excal trigger!
    By CpSuPeRkId in forum Paintball Talk
    Replies: 12
    Last Post: 10-27-2003, 01:14 AM
  2. Hyperframe & Classic Valve- Can i use a retro on/off?
    By daveoy325 in forum Automags - Tech Forum
    Replies: 2
    Last Post: 06-18-2003, 12:42 AM
  3. On/off + Trigger pin = Need tech help quick
    By joeyjoe367 in forum Automags - Tech Forum
    Replies: 4
    Last Post: 04-11-2003, 06:50 PM
  4. how can i do a trigger job myself?
    By zeppskier in forum Automags - Tech Forum
    Replies: 21
    Last Post: 09-21-2001, 10:55 AM
  5. AGD should make an electric trigger frame in a couple years...
    By MikeCouves in forum Automags - Tech Forum
    Replies: 8
    Last Post: 09-03-2001, 12:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •