Page 1 of 2 12 LastLast
Results 1 to 30 of 33

Thread: up for jimmyjobob

  1. #1
    Join Date
    Aug 2001
    Location
    Somewhere in the middle
    Posts
    57

    up for jimmyjobob

    I bought a red anno reg screw from him. Prompt delivery and good communication. much applauding and sorry bout the paypal mess he had
    Impulse
    Eclipse titanium ram and shaft, LPR kit with WGP tickler, low pressure valve kit, delrin bolt, and a 300 fps shot at 135 psi

    Pro Team Micromag

    "Taking mags apart is fun, its even more fun when you don't know what you're doing" - X-plosive

  2. #2
    Join Date
    Nov 2001
    Location
    Expendable Goons, Cheap!
    Posts
    3,311
    Well I posted on the good traders, but since we seem to be doing individual threads I'll say it again:

    I've bought a mag and some misc parts from him. Fast shipping, good communication.

    Good all around trader.

  3. #3
    Join Date
    Oct 2001
    Location
    AZ
    Posts
    742
    Same here he is a great trader and got payment fast.

  4. #4
    Join Date
    Jun 2001
    Location
    NJ
    Posts
    1,240
    jimmyjobob is a great trader. he sent my tank out fast, and was understanding that my mom forgot to send the check. id gladly do business with him again.
    GOOD TRADERS - Tunaman, tysonmachado, DanielGleason, BigBoy005, jimmyjobob, miniMAGster, paintballpapa, ChucktheMAGician, CLeatus, Doc Nickel, pbdeluca, ClassicMagger, Dueydog
    My Feedback Thread

  5. #5
    Join Date
    Feb 2001
    Location
    Where the beer is deep. The forest is funny colored. Cloud nine is a thought away.
    Posts
    2,321
    he bought some of my old mag parts, sent money fast, prompt. dont hesitate with him
    AO #765
    CCM Series 5
    Prerelease Impulse
    Hyperframed Warped Mag w/flatline tank
    Feedback.


    Good to know that somone of Tom's status seeks "relief" from a sport he helped create. A sport now ruled by a single patent.

  6. #6
    Join Date
    Apr 2002
    Location
    The dark side of Hell, FEAR THE "X", Rage Unchecked
    Posts
    829

    Thumbs up Parts is parts

    Bought alot of misc. mag parts. I am now using half the stuff he sold me. The gloves, CP barrel, feed plug, KAPP gas-thru grip and my bro needed a new board for his revvy. Awesome guy to do business with, highly recommended.
    e·vis·cer·ate v. e·vis·cer·at·ed, e·vis·cer·at·ing, e·vis·cer·ates v. tr.
    To remove the entrails of; disembowel.

    "You'll still blame your failure on tiny little balls that don't functon properly." Captain kRYSYS of team plank walkers

    Harbingers of your dying breath

    Black to Red X-mag
    Black ULE-mag
    Evolved Ironman Matrix
    Tri fade E-class Orracle
    Black to Green Splashed Species
    Black to Blue AIM Jam Intimidator

  7. #7
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    8,514

    Thumbs up Doesn't get any better...

    One of the best traders on this board...bar none!
    Email me for low prices on ALL AGD Products and more. tunaman5@verizon.net
    Tunamart

  8. #8
    Join Date
    Jun 2001
    Location
    bangor, ME, USA
    Posts
    336
    I just wish he lived close by, we could save quite a bit of shipping! Defintely a good guy to deal with.
    My good traders list, and feedback for me:https://www.automags.org/forums/showt...251#post303251

  9. #9
    Join Date
    May 2001
    Location
    Near a stadium named after a plant
    Posts
    4,023
    Good deal with Jimmyjobob. Would do business with again.
    Sorry, I'm old

  10. #10
    Join Date
    Mar 2003
    Location
    austin, texas
    Posts
    268
    sold a cocker barrel to him, and he had good communication, and sent the money out quick. i would recommend him
    thx again
    -will
    This chicken is phenominal
    good traders; Squid, zumina, irs709,si|ent|3O|3

  11. #11
    Join Date
    Feb 2003
    Location
    El Paso
    Posts
    1,308
    great trader, kept in touch, sent payment fast, great guy, A+++
    Quote Originally Posted by anonymos
    Are you the whale on the bed baby?

    Cause get ready I am slapping that calf and riding the wave in!

    Feedback thread:
    https://www.automags.org/forums/showthread.php?s=&threadid=70784

  12. #12
    Join Date
    May 2001
    Location
    El Paso, TX
    Posts
    763

    A++++

    Great trader, FAST payment, kept in touch the whole time, and was very understanding about a post office screw up (turned out ok).

    Thanks again bud!
    Brett

  13. #13
    Join Date
    Nov 2002
    Location
    Bridgeport, CT
    Posts
    1,583
    Great buyer
    Very easy going and sent the money fast

    Recomend him to anyone.
    [img]Sig image must be under 20k[/img]


    [ Logic Paintball ]


    [ IM ME! ]

  14. #14
    Join Date
    Mar 2002
    Location
    Ottawa, Ontario
    Posts
    1,560
    Good buyer! Good communicatiosn!

  15. #15
    Join Date
    May 2003
    Location
    montana
    Posts
    371
    Completely trustworthy. I bought a ULE body. Item in perfect condition, as described. Smooth transaction, always in touch with me. Would do business again.

    Oh ya, he had no problem with me calling him. We spoke twice over the phone, always real polite and courteous.

    Thanks

    Last edited by rmhawk; 09-12-2003 at 11:32 AM.

  16. #16
    Join Date
    Nov 2002
    Location
    Illinois
    Posts
    4,930
    fast payment
    easy to communicate with

    good guy
    "The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"

    Alway Remember *343*

    Si vis pacem, para bellum

  17. #17
    Join Date
    Jul 2002
    Posts
    930
    great guy. if i were staying in the sport id def. deal w/ him again. very fast on shipment. dont hesitate.

  18. #18
    Join Date
    Aug 2003
    Location
    Virginia
    Posts
    1,041
    Very easy to deal with and shipped quickly. Great trader.
    AGD - We haven't chopped a ball in years, but nobody believes us...
    EMAIL: july@dmailman.com
    AIM: Sharpcelica

    AO Feedback

  19. #19
    Join Date
    Apr 2003
    Location
    Outside Philadelphia, Pennsylvania
    Posts
    12

    Thumbs down Bad Trader, Left Much To Be Desired

    He sold to me:
    Jimmyjobob
    for 130 shipped ill give you

    body with blocks and internals
    kapp frame with internals
    asa
    timing rod
    cocking rod
    Okay, first off, the cocker is missing hammer springs, and the velocity adjuster. He also did not mention the amount of scratching that the body posesses. The bolt is also missing an O-ring.

    He only said that it might need a polish, which I assumed meant it was dirty, not scratched to hell. obvious body wear near the ram mount. ASA was missing the CRUCIAL screw that allows it to be attached to the body.

    I sent the money to him on the 2nd, I recieved the package on the 11th of December. He overnighted it, I assume to keep me from waiting any longer.

    That's not really cool.

    I don't know what happened Jimmyjobob, because you NEVER told me anything that was going on. Maybe if you explained yourself I would understand!

    Some of my PMs near the end of the deal were never answered, which ticks me off to no end, because you shouldn't leave me hanging like that, it makes me nervous, which translates into bad feedback.

    Honestly, I am dissapointed.
    2003 Limited Edition LCD Angel
    SS 12" Freak (Sac'd up and got the pieces...finally)
    12V-X Revvy


  20. #20
    Join Date
    Feb 2001
    Location
    Savannah,GA
    Posts
    1,569

    Drake

    first off, you were aware of the missing ivg. as far as the asa screw, i do apologize greatly and will send it out tommorrow, unintended mistake. ill send you a bolt oring. i also threw in an extra feedneck and the pump arm.

    as far as your other complaints regarding the scratching, polish means polish. your assuming it was dirty is your own ignorance in the diff between polish and wipe down.

    because you sent the money to me on the 2nd doesnt really mean jack ****. you also sent it regular mail. i didnt receive it until the 8th, and then of course you got it on the 11th. do the math. fyi, it was sent priority, not overnight. you obviously dont know the difference.

    as far as not keeping in contact, i resent that comment as i kept you updated constantly. i think the fact that your payment didnt get to me as fast as youd like it too, means that you interpret it as not answering you. i mailed you on 2 occasions stating that i had not recvd payment yet. you use the word NEVER in your statement which is a flat lie.

    overall my feedback speaks for itself. i am sorry you feel this way. if any one has any worries about my credibility, heres another thread

    http://www.pbnation.com/showthread.p...threadid=12666
    Last edited by jimmyjobob; 12-14-2003 at 08:36 PM.

  21. #21
    coyote Guest
    Note to Drake...

    Any first class mail sent in December takes a long time to get from A to B. A week to 10 days is normal. It also looks like he is making good on any missing parts. I screwed up that way once myself. I compensated by including an upgraded barrel and a tank.

    I think your expectations are kind of high. Did JJB send pics that showed the damage?

  22. #22
    Join Date
    Apr 2003
    Location
    Outside Philadelphia, Pennsylvania
    Posts
    12
    nope. Just a general photo of the gun.

    Also, I would like to note that when I tried to gas up the gun, the valve leaked. Upon taking it to my pro-shop, my tech found that first, the valve o-ring was shot to hell, I mean, like a piece of beef, it was butchered. I'm tempted to take a photo of it. Secondly, he had put in a spring that clearly was not a valve spring, it was a bit smaller than a hammer spring, and clearly was not meant for this gun.
    There is also a hole tapped in the bottom of the front block that could allow the adding of a guage. The screw that he had put in to plug it, was not even the right size, and leaked like crazy, forcing me to replace it.

    The Hammer was also missing a setscrew in the side that locks the lug down to prevent it from backing out. That is also missing, which will force me to either loc-tite it or find a properly threaded and sized screw.

    Jimmyjobob, if all your equipment is treated like this, I would put out a strong warning to anyone that would be tempted to buy from him.

    Thanks for nothing.

  23. #23
    Join Date
    Feb 2001
    Location
    Savannah,GA
    Posts
    1,569

    .

    first off, no matter what i do or say in this situation is going to please you. i have sent you the items that we spoke of.

    i think part of your problem is that a) your an a.ss and b) you nave no clue what you are talking about

    for the money that you are spending at this 'pro shop'
    youd have been better off buying another marker or something that you understand the workings of.

    the set screw under the block was the correct size for your information and i have had to put teflon tape on several ones. does not mean its the wrong size screw.

    once again, ill let my feedback speak for itself and have no worries.

  24. #24
    Join Date
    Apr 2003
    Location
    Outside Philadelphia, Pennsylvania
    Posts
    12
    Actually, most of these complaints are not of my own. They are the views of a certified WGP Tech at my local pro shop.

    Also, you have resorted to calling me a prick and an ***, which clearly undermines you of any sort of standing. I have never called you any names, even though I would love to vent my frustrations by calling you obsene names. But I retain my civility towards you, while you have not.

  25. #25
    Join Date
    Apr 2003
    Location
    Outside Philadelphia, Pennsylvania
    Posts
    12
    In addition to your comment about spending money at my pro-shop.

    I had two options. Leave the autococker as it was, with no springs and damaged seals and no ability to function, or have them replaced.

  26. #26
    Join Date
    Sep 2002
    Location
    fairfax, virginia
    Posts
    793
    great guy, great buyer, very understandable, has great people skills, always a pleasure to talk with.

    A++++ trader!!!

  27. #27
    Join Date
    Feb 2003
    Location
    SE Georgia
    Posts
    179
    Great guy to do business with, fast shipping and case was in excellent shape. Thanks again for a great product at a great price.

  28. #28
    Join Date
    Aug 2003
    Location
    Virginia
    Posts
    1,041
    another great transaction with JB. A+ seller...

  29. #29
    Join Date
    Apr 2002
    Location
    Texas
    Posts
    239
    Great guy, bought a drop from him and he sent it out asap. Always kept in contact. A++!

  30. #30
    Join Date
    Mar 2003
    Location
    Oklahoma
    Posts
    602
    Very fast payment and great communication throught out the whole purchase.
    Marcin P. "Ya gotta dig the Polish!" ~ Army
    Gold Karta E-mag X-valved
    68 Classic Lvl-10

    AO Feedback

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •