I just bought an Emag and I immediately took off the sight rail. After I took it off, I noticed on the right side of the gun body, right behind where the sight rail was mounted is a hex head screw. What is this screw for ?
I just bought an Emag and I immediately took off the sight rail. After I took it off, I noticed on the right side of the gun body, right behind where the sight rail was mounted is a hex head screw. What is this screw for ?
It's the pin for your sear.
------------------
PaintPalooza Extreme Media
dont play with it...since it is roller bearingOriginally posted by BradPalooza:
It's the pin for your sear.
------------------
"You want a shot at the title?"
PsychoMag..."Dogger"
RTP00440, Benchmark Offset Adj. HPA Cradle, Pro-Connect, 12"AA, 12"DYE SS, 12"Boomie, 14"JJ Ceramic, 68/4500 NitroDuck Tuffy, 12Revvie, Warp.
Team ArchAngels
www.angelfire.com/extreme2/archangels"
No Skill, No Talent, Just Heart" ~ Oh Pawlak
The E-Mag sear has a brass bushing instead of a roller bearing. There's nothing wrong with removing that screw. If you do plan on seperating the grip frame from the rail, you MUST take out that screw or else you'll bend the solenoid plunger rod trying to seperate the rail from the frame.