Alright I hope I get the upload's right
Alright I hope I get the upload's right
FSE-LX No-Rise, Halo B, TL63 Trigger, J&J EDGE Set
CHUFF CHUFF!
Great Trader's The Frymarker {Grip Gurl}, Timmy63, SteveD, SHartley, More to Come?
and another
Last edited by FESTUS33; 01-08-2003 at 03:49 AM.
#3
Last edited by FESTUS33; 01-08-2003 at 03:50 AM.
4
Last edited by FESTUS33; 01-08-2003 at 03:50 AM.
i like it
"Hey its the new transparent aluminum gun!! Must be light because you cant see it!" ------AGD
man that is so cool. Did you do it yourself?
Props to echo419 for the sig
wow, thats awesome... how much did the milling cost you.
one question. What happens with the barrel detent used to keep the mag barrels in? is it still in the rail or did you take it out?
Looking for a gun
last
This is still a work in progress, but I had
to get some pic's up before I was lynched
by the Wisconsin contingent.
I know they're not the best pic's, but
let me know what you think of it.
I should have pic's of the completed project,
by monday
Rick
Last edited by FESTUS33; 01-08-2003 at 03:50 AM.
Whoop's
I forgot the last pic.
1 Yes I did it myself
2 machining did'nt cost me .01
I own my own Bridgeport mill,
It's in my basement.
3 I am not a buisness {sp} I am
just a Machinist guy Who got lucky
when it came time for a machine to
be replaced.
I know that does'nt answer all the ?
but I'm a machinist not a secretary,
I"ll try to keep up and answer all
you're question's
Rick
Last edited by FESTUS33; 01-08-2003 at 03:51 AM.
Try again
Last edited by FESTUS33; 01-08-2003 at 03:51 AM.
YeahthatsFestus
Last edited by FESTUS33; 01-08-2003 at 03:52 AM.
That's pretty nice man. The body matches the rail real well. If It was annoed black it would really flow. One question, did you take these picks before the feed was threaded or does the hopper go directly into the body?
Good Traders:JoeyJoe367, Blazestorm213, RetardedRiceBowl, rsadich,PaInTbALL zAcH, jwyke. John Dresser, Xas, Darrikws,whydoineedausername
Splat Attack Revenge V2 LE FS
Conquest FS
?4
No the barrel detent has been pressed out
its EASY just press it from the bottom side
of the rail.
Rick
Hey Mod's can we make this the official thread
for pic's of finished Sluggo's.
Rick
Last edited by FESTUS33; 01-08-2003 at 03:53 AM.
Oh, I guess it was just me then. The glare on the inside of the feed hole made it look smoothe, like there was no threads. Oh well still looks sweet. Congrats.
One word BEAUTIFUL!!!
Give youself a hearty pat on the back, that's some fine work
thats hot, well congrats on the first body, I wonder how it will work. do you plan on more milling?
(by request, reset by Army)
Yes the marker work's, it's been tested.
I have the OkieBob seal of approval.
as far as doing more milling
I prefer to deal with that in P.M.'s
Rick
Last edited by FESTUS33; 01-08-2003 at 03:54 AM.
I LIKE IT! Nice and simple and smooth. You use a cocker detent? Sure I will sticky this up top! Lets roll!
ok first of all thats awesome. i wish i had the knowledge and skill to do that. but two questions about the slug body. this is just an observation: the barrel pin/detent (whatever that thing is that locks the twist lock barrels in place) looks a little out of place. at first i thought it was the angle but it seems a little off. also im unfamiliar with the whole process but do you have to make your own feed neck? i never realized the feed necks were threaded. can you use other feed necks like angel feed necks?
i mean milling on your own slug
What you see is not a barrell {sp} detent
it's an autococker ball detent.
Yes this boby is threaded for an Angel
feed neck, at the time of these pic's
my neck was still being modified by
my brother, so it's not installed yet.
I should have it tommorow, I'm looking
at making it a No-Rise that's why my
bro is doing what he's doing.
Rick
Last edited by FESTUS33; 01-08-2003 at 03:55 AM.
Tippmannman: That pin is the ball dedent that you're looking at. The new slug bodys have threads that accept cocker barrels so there is no use for a twist lock pin.
Oh BTW
I just saw you CPhilip
Thank's for the Up.
Rick
Last edited by FESTUS33; 01-08-2003 at 03:55 AM.
OOP'S
Yeah CPhil I used a cocker detent,
they're easier to find.
Rick
Last edited by FESTUS33; 01-08-2003 at 03:56 AM.
looks great, the only thing i would suggest is to smooth the back of the body where the valve is so that it wont look like it drops off, but smoothly transitions from the valve to the body.
What like it can't be done, I think I just provedOriginally posted by magnj
i mean milling on your own slug
that wrong. I'm just the kind of guy AGD made
this body for.
Rick
Last edited by FESTUS33; 01-08-2003 at 03:56 AM.
thanks for the reply FESTUS33. if i got a slug body (long story but basically i need a new mainbody if want to change barrels and i prefer autococker barrels) is it ready to go if i just got an angel feed neck? in other words. did you have to do anything to make it usable. im seriously considering the slug if its that easy.
He had to thread it to take the cocker detante. There was just a location hole when he got it.
aww... i guess ill have to wait till the x-mag bodies come out then...