Results 1 to 4 of 4

Thread: On/Off pin problem(kind of)

  1. #1
    Spray Painter Guest

    On/Off pin problem(kind of)

    i can't take my valve out by just unscrewing the quick release screw because the on off pin sticks into the body and won't come out until i take the whole marker apart and push the on/off with my finger. i've tried degasing it and the pulling the trigger some more but the sear won't push it up far enough. it wasn't really a problem until now because i'm trying to get level 10 working and i don't like having to take my marker all the apart just to get to the bolt. any ideas/solutions to my problem would help.

  2. #2
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,827
    Try sticking something between the trigger and the end of the trigger rod that will allow you to depress the sear farther into the frame than normal.

    Know what I mean?? Thatís what I do.

  3. #3
    Spray Painter Guest
    what did you use on the backside of your trigger?

  4. #4
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,827
    Really anything that is handy. Sometimes in the middle of a game my on/off pin does not fully reset. Most of the time the trigger rod is NOT sticking out of the frame. The only way to reset the pin is to push on the end of the trigger rod and the valve will fully then recharge. I grab anything handy, generally I it's a stick, but, you should be able to find something laying around the house like (donít tell your Mom I told you to) maybe a fork. Take a pair of pliers and bend one of the prongs over.

    Use your imagination youíll figure it out....
    Last edited by luke; 12-31-2002 at 07:34 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •