Page 3 of 4 FirstFirst 1234 LastLast
Results 61 to 90 of 92

Thread: 2x Frame Need Design Help Fast!!! (pics) >>

  1. #61
    Join Date
    Oct 2000
    Location
    Georgia
    Posts
    804

    Post

    <font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by AGD:


    Ok we hear you, we will go with the plain frame with a little something more on the logo.

    Thanks guys!

    AGD
    </font>
    i agree...the flames were a little too much but if you made the AGD logo a little flashier and likeable that would be nice!

    BTW, the frames looks Bad *** ~


    [This message has been edited by ReTroMagBoy (edited 07-27-2001).]

  2. #62
    Join Date
    Jul 2001
    Location
    USA
    Posts
    54

    Post

    I think it's too much. The Flames just take away from the frame. Just have it all solid black and chrome the trigger. That would be sweet. Simple is better. And if the user decides to add designs on it, they can do it themselves or send it to a specialist.

    Meric

  3. #63
    Join Date
    Jul 2001
    Location
    Last House On The Left
    Posts
    246

    Post

    if i had to pick, i would pick the second(bottom) but i am pretty simple, if i could get it in satin black i would be thrilled

    ------------------
    "It takes a man to cry, but it takes a bigger man to laugh at him."

    micromag s/n 003554
    need a pic?- http://www.geocities.com/unblood/Paintball.html

  4. #64
    Join Date
    May 2001
    Location
    Richmond, Va, USA
    Posts
    1,360

    Post

    Beautiful! I love both of them, but I would have to go w/ the 1st b/c it goes w/ my guns chrome body

    sweet

  5. #65
    Join Date
    Jan 1970
    Location
    "The SC" (South Carolina)
    Posts
    16,216

    Post

    <font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by AGD:


    Ok we hear you, we will go with the plain frame with a little something more on the logo.

    Thanks guys!

    AGD
    </font>
    Sheeeeesh!

    (submitted for Shartley in his absence)



    [This message has been edited by cphilip (edited 07-27-2001).]

  6. #66
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183

    Post

    SMART move Tom, those would have been a flop on the field.

    THANK YOU!

  7. #67
    Join Date
    Jun 2001
    Location
    Bernardston, MA
    Posts
    698

    Post

    Sure, so I type up my first post and the things dont show up no matter what I do, then I post, it refreshes the page, and sure enough there they are Yeah definitely go with the plain AGD Frame.....

    yay for plain

    [This message has been edited by randomboy (edited 07-27-2001).]

  8. #68
    Join Date
    Jan 2001
    Location
    CA
    Posts
    213

    Post

    I prefer the plain-jane look myself. Don't care much for the engraving.

  9. #69
    Join Date
    Jun 2001
    Location
    Clarksville, TN USA
    Posts
    287

    Post

    here's my vote for neither... I want mine either brushed stainless or ano'd black.

  10. #70
    Magoo Guest

    Thumbs up

    I say go with the AGD logo like on the Z-grip, but if you already threw that idea out, I say the second one.

    ------------------
    If it's too good to be true maybe it's God. www.everystudent.com

  11. #71
    Join Date
    Feb 2001
    Location
    Pembroke, NH, US
    Posts
    165

    Post

    I like the second one better, but the first is also nice.

  12. #72
    Join Date
    Jul 2001
    Location
    USA
    Posts
    54

    Cool

    <font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by AGD:


    Ok we hear you, we will go with the plain frame with a little something more on the logo.

    Thanks guys!

    AGD
    </font>
    Hey AGD!!!

    Since you're going for the plain frame,... can I have the frame you used to take these pics? I'll be more then happy to take it off your hands.

  13. #73
    Join Date
    Oct 2000
    Location
    The Roost, Ohio
    Posts
    1,069

    Post

    After polling one out of every five mag owners about their favorite, #1 or #2, i have to say..

    The decisions been made=P.

    Good call, AGD.

    Move along, nothing to see here.

  14. #74
    Join Date
    Mar 2001
    Location
    Miami, FL, United States of America
    Posts
    1,807

    Post

    I say tag it all off and just leave the milling at the back and the engraved AGD. I have a funny suspiscion that this design all has to do with the name Tom has already chosen for the "Name the Frame Giveaway"

    ------------------
    Taking mags apart is fun, its even more fun when you don't know what you're doing

    Ohh yeah and Tunaman sorry for all the stress and all the things I've broken.

    *If corn oil is made of corn, what is baby oil made of?*

  15. #75
    shartley Guest

    Post

    Thanks Phil!

    I see it did little good anyway. LOL

    I am back now. All was wonderful, but while we were there, there was an accident on the largest roller coaster. None of us were on it, but you can imagine people's concern. When I got back, I wasn't in more than 2 minutes and the phone rang.... LOL

    It is good to be loved.... even if it WAS just from an associate of mine. LOL

    Oh, I say we go without the flames.. what about you? LOL (jk)

    ------------------
    “The richest man is not the one who has the most, but the one who needs the least.”

  16. #76
    Join Date
    Jan 2001
    Location
    Ohio
    Posts
    382

    Post

    I think the extra engravings are pushin it. I like the AGD engraved on it, but that is all I would want on mine.

  17. #77

    Post

    I think I like the frame a lot better without the engraving. The AGD is good, but I think you should leave it alone. Maybe lazer engrave around the grips.

  18. #78
    Join Date
    May 2001
    Location
    akron ohio
    Posts
    2,228

    Post

    I dont really like either of them but if i would have to choose i would choose the first one. if u did anything i would like to see u guys countersink the back frame screw. cuz i played today and i have a red sore form it. i think it would be great if u guys did that on the plaint frame. also if u didnt engrave them mabe make it in a few more colors.

  19. #79
    Join Date
    Jun 2001
    Location
    Woodbirdge, CT
    Posts
    389

    Post

    PLAIN IS GOOOOOOOOOOOOOODDDD =)

  20. #80
    Join Date
    Dec 2000
    Location
    Orlando, FL
    Posts
    98

    Talking

    Not fond of either. Something a little simpler would be preferable. Or, If there was someway to get the two lions logo on the frame

  21. #81
    Join Date
    Jun 2001
    Location
    Bristol,CT,USA
    Posts
    47

    Post

    gotta go!

  22. #82
    Join Date
    Jun 2001
    Location
    Good Ole Amish Country, or just outside of lancaster PA
    Posts
    7,579

    Post

    i think it would look good if it were just plain with either al silver chrome what have you or just black with a laser inscribed agd logo

    ------------------
    "your dangerrous!!" -IceMan

  23. #83
    Join Date
    May 2001
    Location
    Auburn, IN
    Posts
    215

    Post

    The 2nd one of course. Just ask Hetfield, flames rip, oh wait he's in rehab....never mind.

  24. #84
    Join Date
    Feb 2001
    Location
    Where the beer is deep. The forest is funny colored. Cloud nine is a thought away.
    Posts
    2,321

    Post

    the second one definitely, the first one is more contemporary looking, while the second one looks more classical engraving

  25. #85
    Join Date
    May 2001
    Location
    around Albany, NY
    Posts
    669

    Post

    I think I am too late but just make the frame teflon black, and if you wanted to do something interesting put a checkering patern(like on real guns), or fishbone pattern on it. I felt that the flames made it look cheesy and like all those other companies that try and sell their gun cause it looks cool and is shiny. Or put lions on them that way it is the company insignia.

  26. #86
    billybob Guest

    Post

    They looks cool but why not use the AGD symbol like in the Z-grips? those were sweet.

  27. #87
    Join Date
    Jan 2001
    Location
    Ontario, Canada
    Posts
    1,617

    Post

    Between the two of them, I prefer the second one(the bottom one) though the frame should be sleek and elegant, to go better with the markers they're being made for. I get a notion that they're trying to be 'angelized' though, perhaps thats what alot of people want these days. All in all, I say go with, or give an option to have a practical, functional, elegant looking frame to go with the superb products they're made for.
    just my two cents.

  28. #88

    Lightbulb

    Ill disagree with most and say i love em both they would look great with the way im gonna set up my mag. !
    Personally i like the boobs! Nice touch AGD!

  29. #89
    Join Date
    Feb 2001
    Location
    Old Town, Maine
    Posts
    1,333

    Post

    I like the 2nd one the most.

  30. #90
    Join Date
    Dec 2000
    Location
    Orlando, FL
    Posts
    98

    Cool

    What you are seeing is here is a long lost attribute. The willingness of a company to adjust and change to market demand in such a visible way.
    This type of visibility is very rare. After working in business for almost thirty years. It is quite a thrill to witness.
    Keep up the good work.

Similar Threads

  1. America the beautiful...Anyone agree?
    By Tunaman in forum Friendly Corner
    Replies: 19
    Last Post: 11-16-2001, 06:20 PM
  2. Replies: 504
    Last Post: 07-29-2001, 01:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •