the electrician wrote on 09-03-2003 07:52 PM:
The trigger pull is 1 mm and about 10 oz of force... so yeah it's short and pretty light. I'm trying to get it lighter.
No. I can't walk the trigger, but then again I don't like to shoot that way. It is however, almost impossible to short stroke it. It can out shoot the revvy in the right hands. The damn thing gets hot.
It's a mod that takes a mill and alot of patience to do. It's pretty simple really if you have the tools. the ASA is tapped to put the reg on the front, then a slot is milled in the body rail for th hose to travel to a micro 3-way behind the trigger. The air then goes to a small air ylinder which pulls the sear down off the bolt.
I think that new on/off design (ULT) might reduce the psi input into the valve, thereby reducing the trigger pull force a bit.
I'm working on a new design that is easier to build and works on a lower psi. and an electro version.
You know, a WGP hinge frame, with a bomb 4-way could produce a super light, 1 mm trigger pull for a mag that would be scary. That might be something to think about...