IntelliFeed help with Warp and Hoppers - Rob?

[MadTommy]

Check it out

http://www.automags.org/forums/showthread.php?s=&postid=98211&t=7099#post98211

This is the post My team Mate set up on the work he done and he has done wot you are asking about maybe if U mail him he will tell U how to do the Job.
-------------------
MadTommy

[Chef123161]

I just got my warp today and took the 9v Connector I was running my Revvy with and hooked it up to the warp. I had a replica of donggie's experience, my warp would just spin and spin. What are the correct jumper settings for it to work correctly? Also, has anyone ran their warp and revvy off the E-Mag battery at the same time? Thanks.

[donggie]

told ya...

It's not the jumpers that have the problem. You'll have to use the interlink cable and be damn careful where you plug it into the emag. My board FRIED. Good thing AGD is as he is and they helped me out... ALOT! So I ended up staying with the two 9 volts in parallel but I don't think I'm gonna try to get her up to 12 volts again. Too much can go wrong and the board doesn't like the extra voltage. I used a 12 v dc regulator. If someone does find a way to do it SAFELY, I'd really love to hear about it.

Don
[email protected]

[MadTommy]

donggie - Ask Bad Dave on my chat http://www.btinternet.com/~ben.reed2
he has done all the things that you are trying and they work very well.
---------------------
MadTommy - Enigma UK

[Bad Dave]

If u want to rig up more than a 9v battery i would recommend getting a rechargeable pack off of john sosta, agd europe. Alternatively u could build your own, u need a nickel metal hydride pack.(rechargeable) the one i have puts out 10.8 volts.
try [email protected]
John might have some helpful suggestions for u.

[donggie]

Thanks!!!

You guys are the best! I've emailed him and am hoping for a response. If anyone could detail here or in an email to me how you did your mod, I'd greatly appreciate it. Where do you put the battery if you use a rechargeable one? Anyway, my email is [email protected].

Thanks again,

don

[Maxd Out]

Additional note:

Warp circuit boards are available directly from AGD for $35. Just incase you want to turn your revvy into a warp revvy like RobAGD describes. E mail the office for more information.

[Bad Dave]

There is a picture of them on the airgun uk website, under the online shop.

To me it looks like three layers of cells have been wrapped together and then a 9v adapter is stuck on the top of it all.

Here is the really cool thing, it fits in the warps battery compartment perfectly, like two 9v batteries sandwiched togehter do.

I know john visits these boards he should be able to detail how to do it in detail or possibly sort u out with one?

[donggie]

What is the url for that page.

Can't seem to find the page within the site where the picture your reference is. Thanks,

Don

[Bad Dave]

http://www.airgun.com/Europe/AirgunShop/page1.htm

underneath the warp feeds

[MadTommy]

HELP OUT

Hi guys because we like to try and help MAG GUYS out as much as we can drop us a line on our message board. We use it for our team BUT I have put a Auto MAG Q & A in there so use it guys because we might not see things on here to help out plus it helps us on our gun skills in sorting things out, the url is

http://www.btinternet.com/~ben.reed2

-----------------------------
MadTommy - Enigma UK

[Butch Borsic]

warp, rev,& emag on same battery...

I've just finished the connections to my emag. everything is working good, except that my warp runs about 2-3 times as fast as it did before is this a potential problem or is it normal. all my connections to the warp and rev have the 9v connecters that plug in to the loaders circuits.

[donggie]

I've modified 5 of my warps and revvys to run off of the emag battery. I've noticed that although some work fine with just that mod, others definitely need the use of the Emag interlink cable just to work properly. Are you using the interlink cable?

Don

[Butch Borsic]

if you mean the cable connecting the emag trigger to the warp. Causing the warp to turn on when the trigger is pulled .... Yes i do have that connection.

[donggie]

Check the dwell jumpers that limit the spin. You may have to put more of them in. Worse case scenario, and it's happened to me twice, the regulator you are using may be shot and not properly regulating down to 9 volts. Did you make sure that the output voltage after the regulator going into the warp is 9 volts? Just another thing to look at. It could be as simple as adding more jumpers to decrease spin time. Tell us how it goes.

Don