Intellifeed to revvy instructions an part numbers please

[PAINTBALLA01]

im sorry im sure this post is out there but i searched for a long time and couldn't find it so if you could help me out i would like the radio shack part numbers, and the instructions on just how t do this.

p.s. when i searched all ifound was how todo it with the warpfeed this is from an intelliframe thanks

[PAINTBALLA01]

also how much did it cost you

[DarkPhoenix]

Try this link http://www.galaxy-pc.com/mag/wiringdiagram.jpg As for the price, I believe all the parts are less than $10 total.

[PAINTBALLA01]

im sorry but thats for the warp feed i said i didn't want that i want to know how to do it with a revvy

[DarkPhoenix]

I'm sorry, I was mistaken. I believe this link should definitely help you though...http://www.automags.org/ubb/Forum1/HTML/004698.html Highly recommend that you read the entire thread and add this to what I previously posted.

[PAINTBALLA01]

that didn't really help me

[DarkPhoenix]

The part numbers you need are in this link http://www.galaxy-pc.com/mag/wiringdiagram.jpg Follow the connections in the diagram. In this link, http://www.automags.org/ubb/Forum1/HTML/004698.html , follow Magc68's intstructions on how to perform the mod to the revy which will allow you to still use the eye in the revy as well as agitating the hopper with each trigger pull using the intellifeed that the first link had you create.