metal Warp adapters... 90* & 45*'s

[abaez]

you need to take paypal.. i can't get to the post office during the week and saturdays im always busy.. i also don't trust leaving my mail in the box for the mailman because it's always stolen

[Bad_Dog]

you need to take paypal.. i can't get to the post office during the week and saturdays im always busy.. i also don't trust leaving my mail in the box for the mailman because it's always stolen

I am currently working on acquiring PayPal... As a matter of fact, I'll be going down to the bank tomorrow to set up a seperate account for internet dealings, which will ultimatly end up being used for PayPal.

[Bad_Dog]

Now accepting PayPal! see first post for info!

getting very very close to #25

[abaez]

check your pm's i want one paypal

[rmhawk]

i sent you a pm

[Bad_Dog]

all Pm's have recieved a responce... or maby two

[Bad_Dog]

up

U to the P!

[Doobie]

I used my elbow this weekend. It works and looks great!
Thanks DOG!

[Bad_Dog]

congratulations to jwalker87 for being #25!

he will now recieve both a 90* and a 45* adapter free of charge! doesnt that just make your day?

up for the rest of the night!

[jwalker87]

eh....yay!

thanks bad_dog! To let everyone know what this will go towards, I am trying to build a warp-right ULE body with a qloader. Zero profile's the idea, and these elbows look great to achieving that. This just made my week!

*sniff* *sniff* thank you! I'd like to accept these in the memory of all those who work for world peace *sniff*

[Bad_Dog]

pictures added thanks to Jwalker! that is one sexy Qloader setup you've got there!

[chem]

[Bad_Dog]

I've had a few people ask about 180* adapters, there are a few reasons why I havent ventured down that road...

...I'd have to do a bit of testing and research to come up with another adapter, when in all reality it would only appeal to a few customers.

...I barely have enough time for the adapters that I currently offer...

...A 180* adapter is going to be fugly no matter what or how its made... I dont want to be responsible for something fugly

smell what I'm stepping in?

[Mechanic79]

I've had a few people ask about 180* adapters, there are a few reasons why I havent ventured down that road...

...I'd have to do a bit of testing and research to come up with another adapter, when in all reality it would only appeal to a few customers.

...I barely have enough time for the adapters that I currently offer...

...A 180* adapter is going to be fugly no matter what or how its made... I dont want to be responsible for something fugly

smell what I'm stepping in?

[Bad_Dog]

I'd be interested in seeing how the bent pipe would fair as a feed tube. I was deterred from that idea with the fear that when a pipe is bent it looses its circular shape and thus the balls wouldnt feed through properly. If you get something working lemme know!

I have connected two 90* adapters together and it does work... but its a huge inverted U sticking off the top of the body.

needless to say I havnt really invested alot of time in the idea since I dont see a real market for something like that.



Notice***

~Due to some changes in my schedule I've lost my ability to keep a reasonable number of these adapters in stock, so I think that I'm going to lay low for a little while and not take any orders. I'm not sure how long it'll be but I have to get some things around here situated before I can resume my normal "status".