Logic Ripper EM - The Electro Solution - PreOrder

[b&r automag]

2nd order is in and only 13 more to go!!!

[CoolHand]

Alright, we are off and running. All the parts have been started on.

Look for raw parts to start showing up in four to six weeks.

Then add three to four for anodizing, and two more for assembly, and you get the "best case" ship date.

I am sure we will miss it though. These things never seem to go like I plan them, but we can always hope (and do the banana dance ).

I will have the laser engraving stencil up in a few days. It will be an outline that you can just photoshop (or preferable Adobe Illustrator) into the design you want engraved on your frame. Its looking like two flats, one in the front and one behind the grips, about 1.5" long, and 0.5" tall (give or take, I just eyeballed it).

Also, just so there is no confusion, the no charge custom colors are for solid colors only, on the VA, Frame, and Trigger. Mix-n-match is OK, but I need you to spell it out when you order (or I will forget when it comes time to ano). When in doubt, I will try to confirm, but if all contact fails, you will get gloss black (this is just CYA, we've got at least a month to iron it all out).

Fades can be done too, but there will be a $25 extra charge, and you will need to supply a part with the fade you want matched already on it.

No guarantees with the color and fade matching, but they will do their best.

Now, go get 'em fellas!

[BigEvil]

How come it wont work with a twist lock body? My hopes for a Classic RT with an egrip are quickly fading

[WenULiVeUdiE]

The twistlock assembly sticks out under the rail.

[CoolHand]

How come it wont work with a twist lock body? My hopes for a Classic RT with an egrip are quickly fading

Well, its not so much the body as the twist lock bushing thing itself.

There was only so much room in the frame, and I had to locate the On/Off toggle and the status LED someplace. The area just in front of the front frame screw beckoned to me, so that's where I put that stuff. However, by it being there, that leaves no room for the twist lock bushing thing to stick down into the frame.

I listed things as compatible/incompatible as to whether they would just bolt on and go or not. The twist lock won't.

I'm sure with a little custom work, and a keen eye for some alternative hardware, we could make it work. Its just not going to be a bolt-on thing.

In my world, everything is compatible with everything else, success just depends on how much time and money you want to devote to the effort.

[CoolHand]

The twistlock assembly sticks out under the rail.

Man, you beat me in at the buzzer.

Announcer - "Its a dead heat. They're consulting the electron microscope . . . . . ."

Consult . . . . Consult . . . . .

Announcer - " . . . . . . And its WenULiVeUdiE, in a quantum finish!"

Me - "No Fair! You changed the outcome by measuring it!"

/nerd

[Carbon Blue]

Gas thru is fine. The LPR mounts on the VA and sticks forward under the barrel.

Does the VA that you are supplying resemble the stock one? So if i picture this correctly the front block will look like a spyder with a low pressure chamber correct?

and is this the LPR (just in black ) that will be supplied?

http://www.pbreview.com/pics/1112160468.jpg

If i wanted a highly polished finished item like that of Deadlywinds raw karta bodies would that be an option?

thanks coolhand

[slimc]

#3 is mine!

[UTDragun]

how will the efficiency be compared to a normal mech, or dm?

[BigEvil]

Well, its not so much the body as the twist lock bushing thing itself.

There was only so much room in the frame, and I had to locate the On/Off toggle and the status LED someplace. The area just in front of the front frame screw beckoned to me, so that's where I put that stuff. However, by it being there, that leaves no room for the twist lock bushing thing to stick down into the frame.

I listed things as compatible/incompatible as to whether they would just bolt on and go or not. The twist lock won't.

I'm sure with a little custom work, and a keen eye for some alternative hardware, we could make it work. Its just not going to be a bolt-on thing.

In my world, everything is compatible with everything else, success just depends on how much time and money you want to devote to the effort.

I hear ya.

Its actually my brothers Classic RT. He is dying to get some kind of e-conversion for it. I dont know why he just doesnt buy a used emag. We have been talking about it in depth lately... I hadnt mentioned your frame unitl last weekend.. now I got him drooling too...

I will see exactly 'how interested $$' he is and drop you an email.

[warbeak2099]

Does this come with a drilled/tapped VA for the lpr? I'm thinking instead of getting the mod done so I can keep the Alpha rail, just buy a cheap used RTP style rail and have Delta milling done to it.

[Automaggot68]

Does this come with a drilled/tapped VA for the lpr? I'm thinking instead of getting the mod done so I can keep the Alpha rail, just buy a cheap used RTP style rail and have Delta milling done to it.

Yes it does.

[WenULiVeUdiE]

Would you be able to Intellifeed this? I'm guessing no due to the board being used, but it doesn't hurt to ask for others who may be interested.

I've never wanted a ULE body more...

[UTDragun]

unless they changed it, predator boards had intellifeed ports

how does the efficiency compare to a mechanical mag or devil mag?

[WenULiVeUdiE]

unless they changed it, predator boards had intellifeed ports

I was not aware of that. Thanks.