Logic Ripper EM - The Electro Solution - PreOrder

[MadPSIence]

Well yeah, I can sell you a whole marker, or assemble one from parts you send, that is certainly doable (eyes or not).

The only thing that would stop us is AGD being out of what you want, but with 6- 12 weeks before the parts are all done, I'm sure we can get it all found in time though.

AGD wouldn't be supplying anything beyond the internals. Body would be DW and feedneck would be RPG Sub-Zero

Can this frame work with a Dallara combo? I REALLY don't like the price of Karta's

[CoolHand]

AGD wouldn't be supplying anything beyond the internals. Body would be DW and feedneck would be RPG Sub-Zero

Can this frame work with a Dallara combo? I REALLY don't like the price of Karta's

Not without some custom work.

Dallara = Classic Rail = Needs custom work to mount va = not a bolt-on mod anymore.

But if I am doing the assembly, its not a big deal (just more work and more $$).

Its likely to come out the same $$ wise with either body/rail combo.

[MadPSIence]

eh, best stick with karta then.

anyways, I'll get back to you when my damn excal sells. hopefully there will be room on the first batch still

[CoolHand]

Come on folks, lets see those preorders.

75 people say they will buy one in the poll, and we can't even muster 5 follow throughs?

I know you are out there.

Stop being so about it and buy one!

[DaveSM]

I would but I already have a devilmag on the way and I keep my actual mag mechanical until PTP release their Pneumatic frame or that I have access to tools to make my own frame. I just designed a pneumatic valve that would have theoricaly a really short and light travel (not a spool valve because it would have made a valve with a longer travel). I inspired myself of poppet valves but it's still quite different. I would qualify it as a dual poppet valve. The main drawback that my design will suffer is that it will be really sensitive to pressure changes (both drops and raises) that would prevent it from working properly...

Anyway, good luck with your frame. I'm sure it will be a great frame and I would have brought it but my economical situation don't allow me to own 3 mags...

[MadPSIence]

don't worry ryan.. I'll buy one as soon as this damn excal is gone or I have some extra cash. I give you my word I will buy one pending availability remains.

[Chronobreak]

im still thinking about it HARD

its alot of $ to invest for a long period with no proto out yet and balh blah blah

i think it would be better for everyone if no one preorderd til they were 100% they wanted one

also looks liek some deatials are still a litle sketchy so ide like to see those ironed out first and i have to check some compatibility things

btw this is going to have a safety right?

[Automaggot68]

im still thinking about it HARD

its alot of $ to invest for a long period with no proto out yet and balh blah blah

i think it would be better for everyone if no one preorderd til they were 100% they wanted one

also looks liek some deatials are still a litle sketchy so ide like to see those ironed out first and i have to check some compatibility things

btw this is going to have a safety right?

It'll have the same safety that any electro (save for Emag/hyperframe) has. The OFF SWITCH.

As for compatibility. You have a karta Rail, which is on the RT PRO platform.

BTW, What's sketchy?

[CoolHand]

im still thinking about it HARD

its alot of $ to invest for a long period with no proto out yet and balh blah blah

i think it would be better for everyone if no one preorderd til they were 100% they wanted one

also looks liek some deatials are still a litle sketchy so ide like to see those ironed out first and i have to check some compatibility things

btw this is going to have a safety right?

I've already spelled out the compatiblity quite well. Any RTP type rail. Any ULE type body. Any RT Type valve.

THAT is what it was designed for use with. It may work with other parts as well, but as with anything that is outside the design envelope, its not guaranteed to work.

The On/Off switch is the safety, just like any Electro, there is no secondary safety, you don't need one.

There is no denying that this is not the perfect setup. However, if you want something like this to be produced (and every diehard magger does), then you might have to deal with a less than optimum situation to get one.

You know I am not going to run off with your money, and since the parts are already on their way, its not like this project will never get started ('cause it's already started ).

The prototype has been done and tested for months. In fact, its been setting so long that most of the parts have been robbed for use elsewhere. That's how long this has been going on. Its been on the back burner because I couldn't afford to do it by myself (there was so little profit that I couldn't justify it). So, now we get to the present, and maggers still want a reliable and cost effective EFrame. Its still not very profitable, but if I don't have to go out of pocket on the whole deal it gets easier to bear. So the preorder is born.

The more static you guys cook up, the longer this is going to take.

It will be better for everyone if you guys would read the information given, look at the outlines given, and get onboard if you want one. Bet hedging will just stall things out.

I am not a hype seller. I have outlined how it will work, what it will work with, and what it will do. That's what it will do. If you have seen a DM4 shoot at 20 bps, you have seen a Mag do it. From the outside these frames look just like any other frame, no bells, whistles, funky exposed linkages, or hoses running in every direction. What you have seen is what you will get.

[UTDragun]

will the frame be added as an extra cost option on your rt custom page on your website?

[CoolHand]

will the frame be added as an extra cost option on your rt custom page on your website?

I imagine that it will be, but not until I have some in stock.

If you want to preorder a whole marker, let me know and I will take care of your order manually.

[MadPSIence]

ryan, i'll be placing my pre-order within the next 2 weeks. please hold a spot on the first 15 if you can.

thanks

[danoxide]

so how many of these have been pre-ordered? if its still under 15 im more likly to pre-order one rather then wait for them to come out.

[CoolHand]

so how many of these have been pre-ordered? if its still under 15 im more likly to pre-order one rather then wait for them to come out.

/checks paperwork real quick.

Three (3).

That's it, just three.

So yeah, its still under fifteen.

[CoolHand]

Bumpus Maximus!