Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

question.. what kind of trigger will this thing have? hopefully nothing thick and clunky like stock mag frames.

will the trigger receive anno as well?

Look at the pic in the first post. That's the trigger it will use. Its a bearing mounted and slightly thinner version of a FireBlade.

Triggers will be anodized to match the frame, unless I hear different from the customer.

They are bearing mounted, so they should have minimal slop, but still be smooth as silk.

[Automaggot68]

Look at the pic in the first post. That's the trigger it will use. Its a bearing mounted and slightly thinner version of a FireBlade.

Triggers will be anodized to match the frame, unless I hear different from the customer.

They are bearing mounted, so they should have minimal slop, but still be smooth as silk.

WHAT DO THE INSIDES LOOK LIKE.

[MadPSIence]

well. I'm on the list. I can't wait. You've got a kickass product coming.

[VFX_Fenix]

WHAT DO THE INSIDES LOOK LIKE.

Trade Secret Don't Ask

[CoolHand]

Its not a secret per se, I just don't have any to take pics of at the moment.

I will post a pic from the prototype/proof of concept (enjoy it, this is the only pic that got taken of any of the parts).

Here is the actuator assembly:



For size reference, that aluminum cube is ~0.75"x0.73"x0.90"

The production version of these parts changed a little, but not enough to bother pointing out the changes.

That's pretty much the entirety of the functional parts of the system, with the exception of the LPR and the Board (and we all know what those look like).

This is not off the shelf stuff, which is why it costs what it costs.

Hang in there folks, things are moving along.

[CoolHand]

WHAT DO THE INSIDES LOOK LIKE.

That was rather rude.

[Automaggot68]

That was rather rude.

Haha, Ryan.

/wink
//knowing smile
/// <- slashes

[MadPSIence]

what are the little knobs? [/newb]

free bump for the holy grail of mag parts.

[WenULiVeUdiE]

They appear to be screws that are in place or barbs. I guess to keep the dust/dirt out while it is not mounted in the frame.

[CoolHand]

what are the little knobs? [/newb]

free bump for the holy grail of mag parts.

The silver ones are screws that are holding on a retainer plate, which in turn is retaining a return spring for the piston. However, it was found that the spring was not needed, so that has been deleted. The production parts have no retainer plate nor any spring. This is why the ULT is not a good idea. We need the RT force of the stock On/Off to reset the actuator.]

The brass one is the input barb for the actuator.

[MadPSIence]

The silver ones are screws that are holding on a retainer plate, which in turn is retaining a return spring for the piston. However, it was found that the spring was not needed, so that has been deleted. The production parts have no retainer plate nor any spring. This is why the ULT is not a good idea. We need the RT force of the stock On/Off to reset the actuator.]

The brass one is the input barb for the actuator.

sounds peachy! I can't wait.

oh ryan, back a while i made a post about doin something special for the first 15. think of anything or are they gonna be the same as the rest.

[Skywalker]

sounds peachy! I can't wait.

oh ryan, back a while i made a post about doin something special for the first 15. think of anything or are they gonna be the same as the rest.

First 15 preorders get to choose a custom color (for the frame, trigger, and VA) at no extra charge, and laser engraving of their choice on one side (I'll post up a template of the area so you can go to town), also at no extra charge.

I've been waiting for this a very long time Ry Guy. You know that. When I get the money I will be on the list for sure.

[Marchborne]

Well yeah, I can sell you a whole marker, or assemble one from parts you send, that is certainly doable (eyes or not).

The only thing that would stop us is AGD being out of what you want, but with 6- 12 weeks before the parts are all done, I'm sure we can get it all found in time though.

Ryan: a similar question here: If I send you an RT valve, a ULE body and Omega rail, could you do a similar workup for me? Basically put it all together. The DC guys and I know each other from work on my viking, so I would be just as happy if they took care of the assembly under your permission.
Thanks,
Carl.

BTW, I forgot to ask: will an Omega rail work on this frame?

[CoolHand]

Ryan: a similar question here: If I send you an RT valve, a ULE body and Omega rail, could you do a similar workup for me? Basically put it all together. The DC guys and I know each other from work on my viking, so I would be just as happy if they took care of the assembly under your permission.
Thanks,
Carl.

DC should be able to take care of it with no problems. I'm still puzzling out what I want to do about eye covers. The longer I think about it, the more I hate the goop option. I've still got odles of time though. I don't want to say that I can for sure do the install for you until I get an idea of what I'm going to be doing. Hang in there.

BTW, I forgot to ask: will an Omega rail work on this frame?

I have no idea. I've never owned an Omega, so I don't know. I am inclined to say that it won't, because its a classic style rail, but I know the Omegas are longer (the question is how much).

[MadPSIence]

ryan, jw if you got my pm about color. btw, about this template going up for the laser engraving. is it being posted on here or at your site?