Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

as far as the eyes will it be a problem on a warp left body.

Yes.

Those prices and covers are only applicable to vert feed ULE bodies on RTP or EMag rails.

Anything else is custom, and will cost more/use different parts.

For the warp, you can pretty much count on getting an EBlade cover, or some other type of cover that goes all the way over the top.

You can't have everything.

FYI, there is about 1.25" of height difference between a warp body, and a vert with a warp adapter, but it is about 10 times easier to install eyes and covers on the vert feed body (plus you retain the ability to use your hopper without a warp, should you have trouble).

[Skywalker]

Why no classic rails? I would like to use my Omega rail if that is at all possible. In addition, I hope my 15* ASA isn't a problem either.

Also, when you have a chance, can you put up a pic of the eye covers?

[CoolHand]

Why no classic rails? I would like to use my Omega rail if that is at all possible. In addition, I hope my 15* ASA isn't a problem either.

Also, when you have a chance, can you put up a pic of the eye covers?

I have been over this many times now. Go take a look at the pics I posted and see if you can puzzle it out. (HINT: The RTP rail is over an inch longer than a classic rail)

I can modify your 15 deg to work. The VA that will come with the frame is straight thought, and I do not have plans to build a 15 deg.

I will post pics of the eye covers when I get them cut. I'm working on the CNC code right now.

[yogi]

coolhand
i already have a pred board in a e mag, and a lpr. what would i need to complete a frame
i use a qloader and lv10 so i dont need eyes. thanks for your reply in adv.

[CoolHand]

coolhand
i already have a pred board in a e mag, and a lpr. what would i need to complete a frame
i use a qloader and lv10 so i dont need eyes. thanks for your reply in adv.

Everything but the LPR.

If you want to buy one sans-a-board, and do the assembly yourself, you can do that, I guess, but there will be no (zero, none, zip, zilch, nada) tech support for the install. I cannot spend a great huge amount of time dealing with board install problems, or frame malfuntions caused by installation errors or initial set-up errors.

So, you gotta ask yourself how much tech support and all that is worth to you. If your answer is less than $125 (the discount to buy a frame without a board or LPR), then by all means go for it.

I will have a minimum charge of $150 to redo a botched install, plus the cost of any parts that don't survive the first try.

And you all wonder why no one builds Mag parts anymore . . . . . . . . . . .

[CoolHand]

The actuator bodies came in today.

That leaves just the triggers MIA now. Once they show up, I can have this bad boy up and running.

The ASA's are not 100% done either, but I think I can finish one up myself for this video marker.

Hopefully next week I'll have some video to post up.

[MadPSIence]

question about your asa's .. do they work with any rail? curious because rogue's asa's have a certain flat rail adapter that is required for some rails.

[Automaggot68]

I have been over this many times now. Go take a look at the pics I posted and see if you can puzzle it out. (HINT: The RTP rail is over an inch longer than a classic rail)

I can modify your 15 deg to work. The VA that will come with the frame is straight thought, and I do not have plans to build a 15 deg.

I will post pics of the eye covers when I get them cut. I'm working on the CNC code right now.

What about Eye Covers for Mag Bodies such as Dallaras?
I hope you recall our AIM conversation about my mag?
If not, PM me.

[CoolHand]

question about your asa's .. do they work with any rail? curious because rogue's asa's have a certain flat rail adapter that is required for some rails.

The ASA's are flat on top, and have the two #10-32 screw holes set 0.5" apart to fit an RTP bracket, an RTP rail, EMag rail, or anything with a slot up front. I suppose that they would go on a classic rail too, but that would of course be neglecting the fact that the trigger guard is so big that you can't use the foregrip mounting hole on a classic rail (and thusly, why this frame doesn't work so well with a classic rail).

Derek - I know you shoot a Dallara, and I am very sorry, but I haven't found a 100% beautiful solution for your eye covers yet. I have to shoot for the majority of folks here with the production stuff. I have no problem doing something custom for your marker, but I don't think I'll be able to figure it out without the body and rail here to futz with and measure and such. When it gets closer, I will get you to send it down.

As it sets, the eye covers will work with EMag, RTP, and Karta rails, as well as anything that Rogue makes that is on the RTP platform, and has flat spots under the ball detents (or has enough meat for me to make flat spots under the detents).

[MadPSIence]

heheh, awesome. when the snow falls I'll send you my gun for eye install.

[Automaggot68]

T]
Derek - I know you shoot a Dallara, and I am very sorry, but I haven't found a 100% beautiful solution for your eye covers yet. I have to shoot for the majority of folks here with the production stuff. I have no problem doing something custom for your marker, but I don't think I'll be able to figure it out without the body and rail here to futz with and measure and such. When it gets closer, I will get you to send it down.

Awesome, thanks Ryan.
Just lemme know, and it'll be on its way to you.
If we can't do anything about then...Compound covers are fine for me.

[CoolHand]

Awesome, thanks Ryan.
Just lemme know, and it'll be on its way to you.
If we can't do anything about then...Compound covers are fine for me.

Yeah, but I can't stand the epoxy eyes.

We'll get you something figured out.

[DiSoRdeR]

Is it possible to get one with out any electronics? I really like how the frame looks but do not want an electro

[WenULiVeUdiE]

Is it possible to get one with out any electronics? I really like how the frame looks but do not want an electro

I am pretty sure he is making a mechanical frame that looks alot like this one.

[CoolHand]

I am pretty sure he is making a mechanical frame that looks alot like this one.

Exactly.

They are being machined as I type. Should see production parts in about a month, maybe a little longer if they hit a snag.

They will look nearly identical, but they will have a safety and the trigger stops from the vert frames. They will also take regular .45 grips instead of these high dollar DM5 grips.