I'm new to automags please answer my questions :)

[�.C.]

[Shaft]

Re: I'm new to automags please answer my questions :)

How does a warpfeed work and what do you need to use it?

It feeds from the hopper and spins the balls up into a powerfeed. You really don't need anything special to use it. An open mind, maybe, because your playing style will change from using it.

Does an intelliframe work like a other electro frames? Or is it just for intellifeed?

Not an electro frame - just intellifeed.

Are mags hard to maintain?

Nope.

Should mags be taken apart and cleaned before and after use? Or should you just drop a few drops of oil here and there?

Just oil it every now and then.

What in your opinion is the best non-electronic frame for mags?

Intelliframe with a groove trigger.

[�.C.]

thanx a lot I really appreciate it!

[Autotrigger]

Questions

The Intelliframe is the best frame for a Mag, but the DYE frame also works well except it doesn't come complete like the Intelliframe.
The Intelliframe is not an electronic trigger frame, but can be wired to run your hopper or warp feed.
I have no experience with the warp feed so I can't answer this question.
The Mags in general are probly the most simple gun to maintain! You want to clean the breech and bolt and oil the gun after each use, but don't split the valve halves unless you need to repalce the reg seat or unless you have a new one to install when you do take it apart!
Forgrips are a matter of personal taste, I like the way a 15* verical asa with a gas thru-grip feels the best. The 15* kick puts your wrist in a more natural position then if it were straight down. Expansion chambers make a nice forgrip due to their size, even when running HPA.
I hope this information is of some help to you.

[�.C.]

thanx it most definitely did!

[Paintchucker]

take care of your baby!!!

Before you play, a couple drops of oil in the air intake on the side of the valve. But after you play, pull it apart and clean any paint that may be there from hits or any breaks you may have had. Keep her clean and oiled and she will last forever!

[�.C.]

thx and another question. Do how often do mags chop(stock)?

[bjjb99]