Tactical Automag prototype thread. Please help.

[famousgamer]

Check this bad boy out. Just saw it on Ebay...



jinkies! Kinda a good idea, the warp the the bow, but what is that thing holding the sight on? Its like some extra peice added on, to clear the vert feed.

It looks weird, but something tells me it would really rip. I like the warp.

That marker is still on Ebay for the next while I bet. Its got a reserve. Just do a search on Special Ops Paintball.


Thought it was kinda on topic. Not exactly my idea of the ultimate automag woodsball machine, but not too far off either. I am a mixed bag of emotions while looking at this beast.

[paintball_fiend]

thats cool
the sight looks like it is on top of one of those bsquare shotgun sight rails but i dought it

im getting a palmer blazer in a couple of weeks right feed and i might put my qloader on it

this is my emag so far


i moded the t-stock to have the air fitting at the back
all it took was a trip to the hardware store and some blue locktight


here it is on my black dragun


also i got some air and a battery charger and this thing smokes cant wait to tune it up and put the lv10 back in it

can you get a right feed body for the emag if so linky please :)

[LONEWOLFOO1]

for you to see into the scope you defiently need a riser kit i am ordering one tommorow. unless you guy know wher i can get one for cheap.

http://shopping.netsuite.com/s.nl/c.322764/sc.21/category.66/it.A/id.2722/.f

[famousgamer]

for you to see into the scope you defiently need a riser kit i am ordering one tommorow. unless you guy know wher i can get one for cheap.

http://shopping.netsuite.com/s.nl/c....t.A/id.2722/.f

so, Lonewolf, you are basicly saying that the with the Longbow kit you need a riser to be able to use a sight?

[FinchMan]

I saw the spec-ops black cell ion at the PB expo in pomona. I would definately need a riser on that one.

[HoppysMag]

let me say, as a veteran of...9 years of woods ball. t stocks arnt worth it on a bulk tank set up( for those of you who dont play stock, that pretty much anything over 4oz co2. and that includes the 13 cu HPA tanks)the remote only gets in your way. restricts off hand useability. and the tank off you butt is just one more target sticking above the log.

but hey, this is just the ramblings of a stock class, old school, Stainless Steel hauling, old coot. you crazy kids these days...

[famousgamer]

let me say, as a veteran of...9 years of woods ball. t stocks arnt worth it on a bulk tank set up( for those of you who dont play stock, that pretty much anything over 4oz co2. and that includes the 13 cu HPA tanks)the remote only gets in your way. restricts off hand useability. and the tank off you butt is just one more target sticking above the log.

but hey, this is just the ramblings of a stock class, old school, Stainless Steel hauling, old coot. you crazy kids these days...

Hehe. I strictly use the remote as an in-between game anti-theft device.

[LONEWOLFOO1]

yes you do need a high riser or you can lower the stock i wish spec ops make a plate adapter.

[LONEWOLFOO1]

yes you do need a high riser or you can lower the stock i wish spec ops make a plate adapter.

i was looking at my long bow and since agd don't want to make a warp feed tac one maybe a adapter like the have for the long they could make they could make it left feed or right feed. if i couls bet away with this than loading a qbow between games. i am not looking to be a sniper.

since i spent the most money on this project i am going to order a warp feed with the q bow adapter if it don't work i could use i on my bushmaster.(maybe) this would not be a problem if agd made a a tac warp feed body or a black warp feed body so what do you guys think? i really like my tac one body but it would have less hose if i bought a warp feed body.

longbow with q bow adapter with the warp feed sytem. it would make use the full pottential of the tac one whats the point of haveing one of the fastest mechanical guns around with a limit of 20-100 rounds

after seeing that pick with the warp fed system i think this is the best solution for the feed. i like the q bow but i need a lot of firepower on me paintball are inaccurate. then i am not willing to lose those q pods i play at skirmish i am not going to stage and reload 5 podes usually when we play we have 15 mins to get ready. plus i am hard on my equipment do you think the q bow can take a beating like the warp?

[famousgamer]

Interesting points Wolf. I share your concerns.

That warp would really get alot paint on that high ROF marker, and would be really easy to reload too. Really, the only downside would be that it is a little tippy to the one paint-heavy side, but with that comfy stock and foregrip I would not imagine this as a huge problem.

The thing I dislike about the pic posted there, of the Warpbow, is how HIGH the thing is. It keeps on going and going. Any sort of adapter or low profile fittings would be nice in this situation. Ill keep my eye open for doable configurations that have already been done.

[famousgamer]

How bout that? Replace the TAC ONE body with a black warp left ULE body (heartbreaking, I know). Seems weird, because the TAC ONE is an amazing body, but it is really not utilized with the Longbow. Lets face it. By switching to warp, you remove all that hose from the top of the marker.

You would probably have to use a 90* warp adapter for that sharp turn tho.... like this...


Since you are not sniping you shouldnt need the red dot on the top. Saves even more space.

[LONEWOLFOO1]

I just notice that thaey gave away a warp sytem for free with the purchase of a warp feed mainbody. i looked at the options and black wasn't in the selection. do you know where i can find a black warp feed mainbody or is there a company that could mill the tac one into a warp feed body. i just surprise that agd isn't up on his it seems to be a no brainer i mss tom kaye. when he was in charge he said that he was going to do them but e left paintball for good. i even have a post of it
(IN A GIRLY MAN VOICE) AGD WHATS THE DEAL?

http://www.automags.org/forums/showthread.php?p=2066542#post2066542

[ThePixelGuru]

You would probably have to use a 90* warp adapter for that sharp turn tho.... like this...

[LONEWOLFOO1]

WherE do you get those 90 degrees fittings? i need ine to put on my WARP BOW.



IT seems that intrest on this post is losing some steam. its ok you guys have giving me plenty of ideas to run with. this forum served it's purpose even spec ops drop in and gave its opnion

i actually need a 180 degree adapter maybe i will melt the 90 degree one or some pvc pipe

[Stealth Fighter]

Here is a though, attach two 90* adapters together.