ULT: Survey -Shims, what is everyone running on RT/X's...

[Riot[Z-Grip]]

Number of Shims: 2ULT 3LX
Level 10: Yes
Why: Feels nice, just on the verge of getting bounce.
Valve: Milled Out ReTro (was single oring previously)
Rail: Benchmark
Frame: Z-Grip
Air system: CenterFlag 420 Series Preset, 68/4500
Output: supposedly preset to 750psi, not varified.

-Riot

[cerealerror]

Name: Nate Gordon

Number of Shims: 2 LvX, 1 ULT

Level 10: Yes

Why: Still got a small chuff factor, but the reativity is gorgeous. My micro had horrible reactivity before this, but now it just sings I think I'm gonna try one more shim and see if I can keep it out of run-away.

Valve: X-valve.

Rail: MicroMag w/o rail.

Frame: Blade Intelliframe ver 2.

Air system: ACI 88/30.

output: ? approx 750 I think.

[DeerChaser]

Number of Shims: 3 ULT and 2LX. One more ULT shim and the bolt sticks and chuffs. Works great with the 3 2 combo

Level 10: Yes

Valve: X valve

Rail: Stock RT Pro/ULE Custom

Frame: Stock/fiber

Air system: Crossfire HP 88 Phat

output: 800psi to 850psi

[tonybhall]

3 ult shims

Name: Bryan

Shims: 3 ULT

LVL 10: Yes

Why: When I got mine it was factory installed and tuned in my Custom ULE RT PRO. It had 6 ULT Shims. It bounced like crazy and I had issues with the trigger going dead. I am down to 3 ULT shims and it works great. I have no bounce problems but the trigger is still reactive enough to reset itself quickly. I can walk it with ease. With 4 or more shims it is easy to sweet spot and bounces like crazy. We are talking full auto here. While fun, it's not legal.

Valve: X valve

Set up: Custom ULE RT PRO with everything they offer incl Inteli.

Air: Crossfire 68/4500

Output: 850 PSI

[BlackHalo]

Name: BlackHalo

Number of Shims: 4 x Lvl 10

Level 10: Yes

Why: doesn't go into runaway and I can't put any more in cause the On-off gets long enough to prevent installation of the valve.

Valve: X-Valve

Rail: Classic

Frame: Z-Grip

Air system: preset (supposed to be 800)

[Zedaine]

Number of Shims: 5 ULT & 1 LVL 10
Level 10: Yes
Why: Well I wanted to get some bounce, so with the 5 Shims that were already in it I added just one and it was very easy to bounce! I thought it was too easy and decided to go down one ULT Shim, when I did that the reactivity was good, but no matter what, I couldn't get it to bounce at all, so I added the 1 Level 10 again, and its very easy to bounce, and still very easy to easy to shoot normal (haven't tried walking yet.) Now I just need a faster hopper :P.
Valve: X-valve RTP
Rail: stock
Frame: Intelli
Air system: preset Crossfire 68/3000
output: 800 psi

[Carbon Blue]

Name: Carbon Blue

Number of Shims: 3ULT and 2LvlX

Level 10: Yes

Valve: X-Valve

Rail: Minimag

Frame: Intelliframe

Air system: Adjustable 68ci 4500maxflo

[Carbon Blue]

is there harm in running 7shims or more?

[the mag guy]

Name: Ruston
Number of Shims: 4 Lvl X
Level 10: Yes ( one lvl 10 shim)
Why: chuffing and search for a better sweet spot
Valve: Xvalve
Rail: custom milled my own
Frame: RPG Chimera
Air system: Nitro Duck
output: Fixed 800

[BigEvil]

Name - Classified
Number of shims - 7 & shortned pin
LVL10 - yes
Valve - X
Why - cus I want the pull to use as little force as possible and as much return 'kick' as possible
Frame - home made electro-pnuematic Intilliframe
Air system - Centerflag 201 set @ 900 psi

[LegumeOfTerror]

Name: Chris The Almighty
Number of Shims: 7 ULT
Level 10: Yes.
Why: i get alot of bounce tword the top of the trigger, and i can still single shot on the bottom no problem.
Valve: X
Rail: RPG Recon Rail
Frame: Intelliframe
Air system: preset Pure Energy
output: dont know for sure

i also run a classic valve with 4 ult shims and it works fine, even with the carbon fiber single trigger on the same tank.

[AGDRetro]

Name: Steve
Number of Shims: 4 ULT
Level 10: Yes
Why: Gets me the fastest I can go! No short-stroking or runaway.
Valve: X-Valve
Rail: ULE Karta
Frame: Intelliframe w/ RPG Viperblade
Air system: Crossfire 68/4500
Output: 800 psi

[vanquish96]

Name: Gene
Number of Shims: 2 lvlX 4 ult
Level 10: Yes
Why: i like the reactivity. i get some baounce. i am chuffing i tad and getting bolt stick a tad so i may take out a ult shim but i love the pull it is walkable
Valve: Xvalve
Rail: AM/MM
Frame: Intelli
Air system: preset dye tank
output: i belive its 800 or 850

[Andrew - NYC]

Name: Andrew
Number of Shims: 4 or 5 ULT plus 1 LX ???
Level 10: Yes.
Why: I can't remember the exact number, but I put in as many as I could. The gun bounced really easily (almost on the point of run away), then I backed off one ULT shim, and could fire with, or without reactivity. Can now walk, sweet-spot (a burst), or single shot... very nice :)
Valve: X
Rail: Wingless Tac Rail
Frame: Intelliframe
Air system: preset Pure Energy
output: 850 psi ?

ULE RT Custom Pro

I'm new to the MAG, but I'm really loving this gun!

[Arbite]

Name: Jim
Number of Shims: 6
Level 10: Yes
Why: Started to blow air out the barrel with 7 shims
Valve: X
Rail: RPG
Frame: RPG
Air system: preset maxflo micro
output: about 850