ALL about the WARP-FEED

[don miguel]

someone probably alread asked this so I feel stupid, but can you buy an on/off for the warp?

[mathok]

You can but the official ones are expensive and unless you send it in for modification you be soldering it in anyway. Just make a trip to Radio Shack (now called The Source where I'm at) and get a basic toggle switch.

Split one of wires to the battery connection thing. Strip the wire ends and solder the toggle swicth between them. Have a hole drilled for the toggle switch to fit snugly in and that should do it.

PS. Should probably dissemble the warp for this cause soldering irons melt plastic rather quickly.

[don miguel]

PLEASE HELP ME! my warp is over feeding and balls are jamming in my feedneck! WHAT DO I DO. The warp pushes them too hard, how do I adjust that?

[EPIC_Vader]

Hey AO
Was showing off my warped mag to a friend who is just starting to get into paintball today. He loved it but asked me a question I wasn't sure I could answer. For some reason he wants to know if a warp feed could push paintballs through 4 feet of hose
anyway, I told him I think it could, but I figured I would check here first. Sorry if this kind of question has already been asked. I checked through this thread for a question similiar, but admittedly, I started rushing towards the end.

Any help would be much appreciated!

-Mike

[sniper1rfa]

i think we decided that it couldn't.

At various times an array of warps was considered, say two or three in a row. That might be powerful enough, though you might start crushing balls.

[EPIC_Vader]

thanks, any idea what the longest one could feed would be?

sorry for the noob questions

[don miguel]

thanks, any idea what the longest one could feed would be?

sorry for the noob questions

I think you meen how long can it feed for? until it runs out of batteries.

[Chronobreak]

i think he meant feed in the tube

i would say 12 vlt mod maybe 3.5 feet
thats about what i got, any longer and you gotta do some more upgrades

as for as longevity of batteries...2-3 days of heavy play

[gotboostedvr6]

OT but
local pb shop is closing they have a brand new warp how much should i offer?

[SSP-SheiK]

can anyone tell me if you absolutely NEED an intelliframe? (i want to warp my mag but i dont want to spend $100 on a frame)

will it work on a carbon fiber or stock frame?

[Chronobreak]

warp wil work on ANY gun/frame

if you want to intellifeed it you need a y-grip, inteeliframe, or rpg chimera

i think those are the only ones with microswitch mounts.

but you can always just use the built in warp sensor.

[SSP-SheiK]

intellifed is when for every shot, the warp turns correct?


can i mod a carbon fiber to "intelliframe/feed" the warp?

[wws2010]

IS THIS THE LINK FOR ONE THAT IS COMPATIBLE WITH AN ION

The Link

Where can I find the cheapest one that is compatable with the ion?

If I buy one that is only compatable with agd then cant I buy the feedneck adapter and it will work?

[MANN]

The one from agd is completely compatible with an ion. You will have to put 2 90 degree elbos to make it down to the warp

[FA22RaptorF22]

hey, i dont know if any techies have tested this thoroughly...but what is the peak voltage a warp board can handle? I know its around 12 somewhere...but what is the absolute frying point of the board? I have a straight 12v mod in now...but i could always get an adjustable and put it just before the frying point. let me know, thanks.