How To Put An Ego Frame On A Mag

[stonersr26]

uugghhh. Not to be mean, but reading your sentences is enough to make anybody cringe....

[FA22RaptorF22]

they are not sentences lol

[latches109]

a period would be nice.

anyway, I used a double acting cylinder, with a 5mm bore with and a 5mm stroke length. The provlem is that i ordered a bunch of different clyinders along time ago, [for experimentation] but shaved off the company name on the particular cylinder. The other downside is i lost all my favorites when i reformatted my computer. I will find it though. I haven't had the time lately....

Latches109

[p8ntbal4me]

a period would be nice.

anyway, I used a double acting cylinder, with a 5mm bore with and a 5mm stroke length. The provlem is that i ordered a bunch of different clyinders along time ago, [for experimentation] but shaved off the company name on the particular cylinder. The other downside is i lost all my favorites when i reformatted my computer. I will find it though. I haven't had the time lately....

Latches109

What about that noid your using?

I know which one it is,.. but has it started leaking yet?

My biggest issue, as well as BigEvil's, was the noid was a leak problem from the get go.

Its a great unit and all,.. just that after messing with it to test the limits of the gun it just broke.

I have my gun cycling way beyond 20BPS (someone contacted me to make a video for proof. Hopefully the weekend of the 17th you will see it posed here) and I think that to go beyond 20BPS the noid needs to be at a higher input PSI,.. at least the max input psi does.

Food for thought,... input on this wold be great!

[latches109]

noid is rated for .7 bar It will leak above this pressure. I haven't had any problems yet.

[p8ntbal4me]

noid is rated for .7 bar It will leak above this pressure. I haven't had any problems yet.

Not that I want your gun to break or anything.

But if you test it out a bit more, try maxing out the ROF.

I dont use EGOs so I dont know what the software can do.

If you go above that ROF for say, 1000 shots, check for leaks in the noid.

[Nicholai]

SO I was thinking, why not put the noid and possibly even the board in an emag battery case?? Then you could possibly use an actual ego solenoid and/or better etc. Also then you could use any frame u want and then would it be possible to use the Regular pneumatic ram commonly used in pneumags?? It would be sweet if someone could mill the emag battery case for the button holes & lcd window like the frame too!!

[p8ntbal4me]

I was just lookng at your ram you used.

Looks ALMOST like mine. Mine is a bit longer and slightly deeper but drops into the I-frame with no milling required. Whats the width of that EGO frame internally?

My bore is larger too,... Im using an 8mm bore. I was going to try the 6mm & 4mm bore but between gas usage and the stoke to strike force on the sear using an R/T on-off.... 8mm as the way to go.

[p8ntbal4me]

SO I was thinking, why not put the noid and possibly even the board in an emag battery case?? Then you could possibly use an actual ego solenoid and/or better etc. Also then you could use any frame u want and then would it be possible to use the Regular pneumatic ram commonly used in pneumags?? It would be sweet if someone could mill the emag battery case for the button holes & lcd window like the frame too!!

Dont quote me on this or anything, but I do believe this is already in the works.

[latches109]

Not that I want your gun to break or anything.

But if you test it out a bit more, try maxing out the ROF.

I dont use EGOs so I dont know what the software can do.

If you go above that ROF for say, 1000 shots, check for leaks in the noid.

noid won't leak unless the lpr creeps up. The lpr is able to keep up at 15.4 bps[ego's cap] A few cases have been through this noid, with no leaks.

[latches109]

SO I was thinking, why not put the noid and possibly even the board in an emag battery case?? Then you could possibly use an actual ego solenoid and/or better etc. Also then you could use any frame u want and then would it be possible to use the Regular pneumatic ram commonly used in pneumags?? It would be sweet if someone could mill the emag battery case for the button holes & lcd window like the frame too!!

why over engineer things?

[latches109]

or can i tear apart a cocker ram cut the outside then retape it for the back and then add a spring in the front part

check the diameter

[latches109]

I am unsure why many are suggesting to relocate the noid when it fits perfectly in the frame with everything else. Just a thought.

[p8ntbal4me]

I am unsure why many are suggesting to relocate the noid when it fits perfectly in the frame with everything else. Just a thought.

I wanna see that gun max out the ROF.

Several people cant explain why the noid starts leaking.

I say its the ROF to recharge rate, but Im not all savy in the ways of noids.

[p8ntbal4me]

I am unsure why many are suggesting to relocate the noid when it fits perfectly in the frame with everything else. Just a thought.

It may look "clashy" where you have it, but it obviously works.

Could you measure the top of the frame for me?

I would like to know how wide that frame gap is that you put the ram into.

I see you had to take a bit off the ram, so I was wondering it mine would fit where yours had to be modified.