G-Force to release pneumatic frames for the Mags

[jaywmustang]

hey garf u have a pm i am having a problem ordering

[G-Force Tech]

Jason,

Your're fine. Read your PM.

Garf

hey garf u have a pm i am having a problem ordering

[G-Force Tech]

LPR is mounted on this frame via socket cap screws.
oring goes into center hole
on/off ASA bolts to outer 10-32 holes




Adaptor plate bolts to the base of the frame
on/off ASA bolts to adaptor plate
Tank attaches to ASA
Turn on ASA
Air goes into Mag and into bottom of frame for the pneumatics

Do you have a photo of how G force mounted an ASA and used the internal LPR? Might give people a better idea of what they are in for if they go that route.

[Don Carnage]

OK, just to clarify...
This is a first (possibly only) run of these frames.
As of now, they require a LPR mounted off a front ASA.
There is also a Gforce LPR we can buy (available in December) that can mount inside the grip (ie 'sleeper style'), providing we drill a small hole in the ASA.
If we buy the grip and the LPR together, GForce will install it, but we stil have to drill our own ASA.

Is that correct?
Did I miss anything?

If this is all correct, I'm ordering one now because I've missed too many chances at 1-run items.




And just to reinterate, thank you for doing this run. Mags are a niche market, and not only is it a big honor that you are making mag frames, but that mags are the first frames you are making.
I hope this is very profitable for you on not just mags, but the other gun frames you will be doing.

[G-Force Tech]

I think there are vert ASA available with front tapped 1/8-NPT to make it easy for every one. The internal Micro-LPR would be an easier install but the external is easier to adjust. I guess a few people really want the "sleeper" look.

Garf

what happened to the second run in my mind is everyone moaned and groaned too much about installing a lpr - maybe next we can get him to take our guns and tune our lvl X

/Sarcasm off

But really, I think this will be a great product and I ordered, i will probably pick up my 20 dollar drill put an asa in the vice and tap it wih a punch and drill it. And if it messes up im out 30-40 buck for a botched attempt ruining an ASA. I mean why are you buying a $200
grip frame if you cant spend money on an asa? my advice if you dont have an old type asa to try with (if you dont have 8th grade shop skills) find an old POS one. I think i have 2-3 from the ions i replaced with CP asa, about 3-4 Aigun asa's, 5-6 unknown asas. If you want one to dink with hit me a pm when you get your frame and i'll ship you one for free.

Once again thanks for adding a new product to a small niche market, i appoligize if we come off needy or arrogant sometimes, but then again we do have good taste in guns.

Later

[G-Force Tech]

Conversions by DIY and airsmiths are one-offs, people are happy with that.

Our Mag pnuematic frames are production frames and testing has been done back over 7 years ago on the 68Super and S1 prototype markers.

What issues are you referring to?

I think some of us want to make sure that there are no issues with the first run, my $.02

[G-Force Tech]

Don,

The frames work with either a front or internal LPR, no difference in performance, just looks.

The LPR is expect to ship in late Dec 2007, but orders that are place online for both can have the option of have the LPR installed no charge. Although the LPR is a 5min installation.

Most of the work will be done by the owner to tune the trigger to its shortest possible pull so it can walk fast like an electro.

All orders placed now for frames and LPRs will get filled. Since the production is limited, the online store will keep on taking orders until the limit is reached. A second run is not planned right now.

Garf

OK, just to clarify...
This is a first (possibly only) run of these frames.
As of now, they require a LPR mounted off a front ASA.
There is also a Gforce LPR we can buy (available in December) that can mount inside the grip (ie 'sleeper style'), providing we drill a small hole in the ASA.
If we buy the grip and the LPR together, GForce will install it, but we stil have to drill our own ASA.

Is that correct?
Did I miss anything?

If this is all correct, I'm ordering one now because I've missed too many chances at 1-run items.




And just to reinterate, thank you for doing this run. Mags are a niche market, and not only is it a big honor that you are making mag frames, but that mags are the first frames you are making.
I hope this is very profitable for you on not just mags, but the other gun frames you will be doing.

[Andrew Cunje]

gforce i ordred ur LPR can u possibly refund one of the shippings? since i had to order teh trigger yesterday seperately?

let me know

thanks

Don,

The frames work with either a front or internal LPR, no difference in performance, just looks.

The LPR is expect to ship in late Dec 2007, but orders that are place online for both can have the option of have the LPR installed no charge. Although the LPR is a 5min installation.

Most of the work will be done by the owner to tune the trigger to its shortest possible pull so it can walk fast like an electro.

All orders placed now for frames and LPRs will get filled. Since the production is limited, the online store will keep on taking orders until the limit is reached. A second run is not planned right now.

Garf

[G-Force Tech]

Andrew,

PM sent.

Garf

gforce i ordred ur LPR can u possibly refund one of the shippings? since i had to order teh trigger yesterday seperately?

let me know

thanks

[BangStik]

Conversions by DIY and airsmiths are one-offs, people are happy with that.

Our Mag pnuematic frames are production frames and testing has been done back over 7 years ago on the 68Super and S1 prototype markers.

What issues are you referring to?

My fault I read through the thread and did not realize that your company has been doing this for some time just not with mags. Do you think the new smart Patrs patent filed in Aug. is going to effect you guys? Waiting for the wifey to give me the go ahead to place the order!!!!

[UThomas]

Can the frame be easily disassembled and reassembled for custom anno?

[LabRat]

Originally Posted by G-Force Tech
Mag owners,

The prototype p frame tested flawless and a pre-production frame is being milled now and then anodized for pictures.

I'll post them in the next fews days and videos of it firing live balls.

Garf

PS. RobAGD will be the beta tester for the pre-production frames.

Will RobAGD or another well known member of OA be evaluating a frame in the near future?
If not, why not?

Can we please see video of an Automag version of the G-force frame firing live balls?

[TnDeathInc]

Posts: 9

[Papa_Smurf]

Will RobAGD or another well known member of OA be evaluating a frame in the near future?
If not, why not?

Can we please see video of an Automag version of the G-force frame firing live balls?

Wow.

[G-Force Tech]

YES

Can the frame be easily disassembled and reassembled for custom anno?