G-Force to release pneumatic frames for the Mags

[G-Force Tech]

New trigger for production frames



This will be the trigger used in the production frames.

There are three adjustable points.

Garf

[Papa_Smurf]

When will we see internal pics?

[Beemer]

Wow.

Why?

Will RobAGD or another well known member of OA be evaluating a frame in the near future?
If not, why not?

Can we please see video of an Automag version of the G-force frame firing live balls?

Ya that got my attention too.

Originally Posted by G-Force Tech
Mag owners,

The prototype p frame tested flawless and a pre-production frame is being milled now and then anodized for pictures.

I'll post them in the next fews days and videos of it firing live balls.

Garf

PS.RobAGD will be the beta tester for the pre-production frames.

[G-Force Tech]

I'll post internals of the production frames.

Garf

When will we see internal pics?

[longi]

If i'm running an external LPR where on the topside of the grip frame will the air hose exit from? Silly question i know, but i'm curious! :)

[G-Force Tech]

Left.


Garf

If i'm running an external LPR where on the topside of the grip frame will the air hose exit from? Silly question i know, but i'm curious! :)

[G-Force Tech]

Front tapped Vert ASA for AM/MM and Tac Rails

We will be making available vert ASA for the AM/MM and Tac rails pre tapped with side and front 1/8-NPT ports.

We hope this would make for easy installation for those converting to pnueumatic frames.

Garf

[trevorjk]

We will be making available vert ASA for the AM/MM and Tac rails pre tapped with side and front 1/8-NPT ports.

We hope this would make for easy installation for those converting to pnueumatic frames.

Garf

any videos yet?

[warbeak2099]

We will be making available vert ASA for the AM/MM and Tac rails pre tapped with side and front 1/8-NPT ports.

We hope this would make for easy installation for those converting to pnueumatic frames.

Garf

Awesome. I think just for the easy tuning, I'll go with that.

[insixdays777]

Garf,

I just ordered mine! (and I dont ever own a MAG yet.!)

QUESTION:

Which automag on/off? ULT, RT, Classic Mag? will they all work? which one is recommended?

Thanks!

[G-Force Tech]

ULT not required.

Classic Mag on/off and X Valve without ULT.

Level 10 is recommended to reduce chopping unless you have a fast loader.

Garf

Garf,

I just ordered mine! (and I dont ever own a MAG yet.!)

QUESTION:

Which automag on/off? ULT, RT, Classic Mag? will they all work? which one is recommended?

Thanks!

[trevorjk]

videos???

[p8ntbal4me]

Are you certain there will be a second run?

It is for this reason here that I bought my frame on the first run.

Its been too many times that a second run of alot of things on the AO have never come to pass,.. or I have been gone and missed out entirely.

Guys,... get a frame. Just get one and sell it off later if you dont like it,... but get a frame!

[warbeak2099]

videos???

Agreed, let's seem some vids of this ripping. And pictars of the internals please!

[G-Force Tech]

The prototype had a trigger pull down to 0.5mm, but after tweaking the pre-production frames, the trigger pull is less than 0.2mm which I can barely get two sheets of paper between the trigger and frame.

Videos will be up on new shorter trigger pull frame and live firing in a few days.

Garf

It is for this reason here that I bought my frame on the first run.

Its been too many times that a second run of alot of things on the AO have never come to pass,.. or I have been gone and missed out entirely.

Guys,... get a frame. Just get one and sell it off later if you dont like it,... but get a frame!