Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

Nice to see some of these coming so close to being done.
Question? Can we send you a different LPR or just change it when we get it?
I kinda wanted to go with AKA LPR
or do u think it will make a difference?

The air flow requirements are very low, so just about any LPR will work.

If you like the looks of the AKA LPR better, I can certainly swap it out on yours instead of the MiniMaxFlo. It looks like I'll be a little short on black LPR's anyway, so buying another from AKA will actually help that problem a little bit.

Your call, just let me know what you want to do.

Are you waiting on one of these Bolt-on's, or do you have a whole marker coming?

[going_home]

The air flow requirements are very low, so just about any LPR will work.

If you like the looks of the AKA LPR better, I can certainly swap it out on yours instead of the MiniMaxFlo. It looks like I'll be a little short on black LPR's anyway, so buying another from AKA will actually help that problem a little bit.

Your call, just let me know what you want to do.

Are you waiting on one of these Bolt-on's, or do you have a whole marker coming?

I just looked on their site and didnt see any .
What do they look like ?

[CoolHand]

Go here and look at the one the farthest to the left:

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=AKA-SCM3&Category_Code=REGULATORS

That's the AKA SCM III. They only come in satin black.

[manwe33]

The air flow requirements are very low, so just about any LPR will work.

If you like the looks of the AKA LPR better, I can certainly swap it out on yours instead of the MiniMaxFlo. It looks like I'll be a little short on black LPR's anyway, so buying another from AKA will actually help that problem a little bit.

Your call, just let me know what you want to do.

Are you waiting on one of these Bolt-on's, or do you have a whole marker coming?

Thanks i would love the AKA. I just love the way the aka looks. Plus i am a aka fan. i have spot number 10. Full marker. i have my body at jared dc right now getting the eyes and eye covers done. I guess i am the last one you have to deal with. So i am just waiting in the background. letting you make the mistakes on all the other markers and get mine perfect thanks for the updates. i cant wait.

One more thing could i run a sidewinder. give it a little more sleeper look. Just a thought.

[going_home]

Go here and look at the one the farthest to the left:

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=AKA-SCM3&Category_Code=REGULATORS

That's the AKA SCM III. They only come in satin black.

Any of them will work fine for me. No preference.
I want mine in dust or gloss black or black something.

[CoolHand]

Thanks i would love the AKA. I just love the way the aka looks. Plus i am a aka fan. i have spot number 10. Full marker. i have my body at jared dc right now getting the eyes and eye covers done. I guess i am the last one you have to deal with. So i am just waiting in the background. letting you make the mistakes on all the other markers and get mine perfect thanks for the updates. i cant wait.

One more thing could i run a sidewinder. give it a little more sleeper look. Just a thought.

If a sidewinder can reliabley put out 60-80 psi, then yes, we can figure out a way to make yours use a sidewinder instead of an LPR.

Like you said, it's going to be last anyway.

[CoolHand]

OK, update time, then I'm crashing for about ten hours.

I got not one, but two (count 'em) TWO more frames done today. That leaves just two to do tomorrow, so I might actually get these first six polished off this weekend.

I still have to read the Chaos manual and do the programming, but once I get the PC software sorted out and configured, that should go pretty fast. With any luck at all, these six frames will be shipping next weekend.

Picward HO!

First I knocked out the last four wiring harnesses. I wanted to get all the soldering done so I could be finished with the fumes and crap for a while:



Then I put the leads onto the solenoids:



After that I started on assembling the third frame:





AO still makes me break the pics out into more than one post.

More to follow . . . . .

[manwe33]

If a sidewinder can reliabley put out 60-80 psi, then yes, we can figure out a way to make yours use a sidewinder instead of an LPR.

Like you said, it's going to be last anyway.

That is about what my vikings run at so i think we will be safe. cant wait ill do some homework on it.

[CoolHand]

That makes three done now:



Then I started in on number four (at about 10:45pm):



Finally, at about 1:20am I got number four done:





Hopefully I'll be posting some more pics later today, but right now I must sleep.

That is all.

[CoolHand]

That is about what my vikings run at so i think we will be safe. cant wait ill do some homework on it.

No, your Vikings recock at 70 psi. That's the LPR's output. The sidewinder on a Viking will run about ~200 psi.

I've never tried to run a sidewinder at such a low pressure, I don't know how it will flow.

[manwe33]

No, your Vikings recock at 70 psi. That's the LPR's output. The sidewinder on a Viking will run about ~200 psi.

I've never tried to run a sidewinder at such a low pressure, I don't know how it will flow.

Ok home work time. i a pneumatics mag i am working on. Ill try and get a side winder to work on it. If not i could go with the Plamer reg that people are using on there pneumaticmag. Anyways get job on those frames its nice to see them about done. There aregoing to be some sexy beasts running around this summer. Are you planing on selling any gutted frames. do u have any left over. if so let me know.

[Papa_Smurf]

Looking good!

[CoolHand]

Bad news fellows. In my sleep deprived haze last night, I forgot that I had used the last two #10-32 hose barbs I had to assemble those two frames I did last night.

I ordered some more from AirSoldier three or four days ago, so hopefully they will arrive on Monday or Tuesday of next week.

So today I did as much assembly as I could on the last two frames and now they wait for the hose barbs to show up so I can finish them.

I'm gonna spend the rest of the day puzzling out the programming software.

[Papa_Smurf]

sent you a PM coolhand.

[olinar]

Those are great, Im kicking myself for not taking someone's preorder spot wheni had the opportunity.

These are going to be awesome!