Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

Ok I was here. I had to remove some posts to clean it up some. One was yours CoolHand. Sorry you had to reply to that troll. He wont be back for a week. If any of you have a problem with a post removal PM me about it. I can put your post back if you want CooHand. It is YOUR thread.

In the mean time the boat is still afloat and not sinking. Maybe a little off course but still moving along. Just so ya know your name still stands here. Next time please dont waste your time on a troll and just report it and we will handle it.

Carry on............

Thanks for that.

No need to put my post back, as it was really just a long winded insult, though it did have a certain eloquence to it that I seem only able to tap into when pissed off.

At any rate, it reminded me to do an update, and I even had actual information to pass along, so it's all good.

Have a good weekend fellows, I'm going to try and get out into the shop for a change.

[Corbet]

I can't believe this thread has been here for 2.5+ years.

[Beemer]

Thanks for that.

No need to put my post back, as it was really just a long winded insult, though it did have a certain eloquence to it that I seem only able to tap into when pissed off.At any rate, it reminded me to do an update, and I even had actual information to pass along, so it's all good.

Have a good weekend fellows, I'm going to try and get out into the shop for a change.

Ahhh I know the feeling. It was a true post none the less.

I can't believe this thread has been here for 2.5+ years.

Stay tuned. It will be epic when the boat docks.

[lostprophet]

Godspeed

Good luck to you all, I am so that I wasn't around to get one of these. Once the "Boat" docks I can't wait to see videos. Also, Luke if I had been here I wouldn't have minded waiting. I hear nothing but good things about your work. Don't get disheartened it's guys like you that keep guys like me with awesomeness to show off at the field when EVERYONE else is sporting the same old Ion and Matrix and such. So thank you as an maker and a do'er. You make owning a Mag great

With respect
LostProphet

[CoolHand]

Thanks.

It's good to see that for every troll, there is at least one or two guys who are happy to see something happening.

I called AGD and left a message for Dave today to pay for the parts I still need, so those should be shipping this week sometime.

As soon as they get here, I'll sort out the bits and get the second ano batch ready to go out.

In a couple three weeks, we ought to have some badass pictars of finished ano to show off. If the guys at GBA are in good form, we might even have all of them done by that time.

We shall see.

At any rate, progress is underway.

Huzzah Again!

[CoolHand]

Short update before I go to Rolla and get my St Pat's on.

I got a box from UPS today, and when I opened it, what did I find?

AGD Flavored Love!



That's the last of the parts for the full markers that have been ordered.

Now, for all the trolls and nay sayers out there, I just want to point out that inside that box is $2,200 out of my last paycheck. Straight out of my pocket (as the money taken in on the preorder has long ago been spent on the other parts you all have already seen), into AGD's coffers.

If I was gonna rabbit and not deliver the goods, dontcha think I'd have done that before I went spent over two grand out of pocket? Just sayin'.

That all said, I AM going to be incognito for the next day or three, partying my posterior off at the 100th annual St Pat's celebration at UMR.

Woo to the Hoo! No need to pack pants people, let's GO!



I'll post again mid-next week after I've recovered, assuming I survive.

[going_home]

Short update before I go to Rolla and get my St Pat's on.

I got a box from UPS today, and when I opened it, what did I find?

AGD Flavored Love!



That's the last of the parts for the full markers that have been ordered.

Now, for all the trolls and nay sayers out there, I just want to point out that inside that box is $2,200 out of my last paycheck. Straight out of my pocket (as the money taken in on the preorder has long ago been spent on the other parts you all have already seen), into AGD's coffers.

If I was gonna rabbit and not deliver the goods, dontcha think I'd have done that before I went spent over two grand out of pocket? Just sayin'.

That all said, I AM going to be incognito for the next day or three, partying my posterior off at the 100th annual St Pat's celebration at UMR.

Woo to the Hoo! No need to pack pants people, let's GO!



I'll post again mid-next week after I've recovered, assuming I survive.

[p8ntbal4me]

Ohhhhh baby!!

I count 19 bodies in that box!!!

I would LOVE to get a box like that on my door step!!!!

~ P8nt

[CoolHand]

Ohhhhh baby!!

I count 19 bodies in that box!!!

I would LOVE to get a box like that on my door step!!!!

~ P8nt

Actually, what you're counting is seven bodies, seven valves, seven foregrips, and seven rails, though I don't think I'm going to use the rails.

I just finished the GCode to cut some SuperULE rails from bar stock. They're looking like about 2.5 ozs for the finished rail, and yes, that's an RTP length rail.

Hopefully things will go well this weekend and I can get a few of them cut. If the weekend goes by and I get nothing done, I will have the rails that came with the bodies and valves anodized to keep the show rolling.

Stay tuned, hopefully I'll have pics of shiny new metal bits in a few days.

[smilestyler]

Were you going to mill room for the eye wiring in the rail? I've been unclear on this for a while but forgot to ask.

[CoolHand]

Were you going to mill room for the eye wiring in the rail? I've been unclear on this for a while but forgot to ask.

Yes, I will clearance inside the rail for the eye wires.

The only machine work you'll have to do to the rail to install the eyes is cut a half round slot from left to right across the top of the rail right under where the eyes go, so the wires can pass between the edge of the rail and the body.

This is the only cut I cannot do ahead of time, 'cause it will show on markers where people choose not to use the eyes.

In a pinch, you could do it with a chainsaw file, but since you'll have to drill the body for eyes anyway, you'll be having someone do some machine work anyway, best to let them handle it then.

[going_home]

Gruntbull

Ryan whatever you do DONT look at this thread .

http://www.pbnation.com/showthread.php?t=2608915

Warwitch sent his Viking and looks like Gruntbull may have destroyed it.

[UTDragun]

Ryan whatever you do DONT look at this thread .

http://www.pbnation.com/showthread.php?t=2608915

Warwitch sent his Viking and looks like Gruntbull may have destroyed it.

more stress and drama please

[CoolHand]

Ryan whatever you do DONT look at this thread .

http://www.pbnation.com/showthread.php?t=2608915

Warwitch sent his Viking and looks like Gruntbull may have destroyed it.

Oh joy.

Well, if they destroy something, we'll deal with it.

I just don't have any other more reliable options for ano at this point.

If they take three times as long as they say they will, AND destroy 10% of the batch, they'll still be no worse than any of the other anodizers I have used in the past.

Here's to hoping it's an isolated crap-up.

At least none of these parts are truly irreplaceable (certainly not has hard to replace as a Viking body). I have enough parts here to build the preorders twice over, and AGD still stocks ULE bodies, so we'll have at least two tries to get it right.

Besides, these markers are none of them terribly complex. I would hope that a simple ano would get done faster, and be more likely to miss the crap-ups than a super complex one like that Viking had.

Like I said, we shall see.

BTW, short update while I'm here.

I got the tools all pulled out for the SULE rails and I've got 90% of the GCode done for them as well.

However, I got tangled up with a project for my old man, so I'm not going to get them cut this weekend. I'm not going to call it just yet though, 'cause I'm getting really close, and I don't want to send these things out of here with standard weight AGD EMag rails on them unless there is just no other option.

Goldie emailed me to say he'd spaced on my boards all last week (didn't touch them at all), but that he thinks he got one fixed yesterday. If the output is correct, he'll grind through the others and get them back my way. No idea on ETA though.

Hang in there guys, we're still moving along, it's just at a near-dead snail's pace.

[wooky]

CoolHand I am just checking in, I suppose all these babies are still spoken for? I still have cash for anyones spot!!


JLMK
Wook