Originally Posted by luke
uh oh the gears are turning time to build something new
Originally Posted by luke
uh oh the gears are turning time to build something new
2k2 Angel LCD
turbo trigger
CP volumizer
PIPE KIT
2k Angel CnC LCD
Vert Frame
Freak Barrel
B2k x-milled
micro rock
Dye sticky 3's
vertical max-flo
Edge barrel with blue J&J tip
Egg 2 y board
Empire Reloader
Dye Throttle 91/4500
Crossfire 114ci/3000
Angel Air Reg
Turning, yes. They just need a little oil to stop the screeching and grinding!Originally Posted by Dend78
In all honestly i have been thinking on your question way to long. I can't think of any reason that you can't use just about ANYTHING that will add the pressure when open and release the pressure when closed. Hell if you could get it to work right you could use the 3-way valve from a cocker. It does the same thing other that the 3-way from a cocker adds pressure in reverse to return the bolt. If you have soemthing that will open/close on the pressure to the ram i can't see how it wouldnt work other than placement and the area it needs to fit in....Originally Posted by luke
Cy
Zero Gravity Customs
Play hard or go home......
My feedback
https://www.automags.org/forums/showthread.php?t=129891
When my buddy silencer.1 and I did ours way back when we used a three way positioned behind the trigger. It's been a long time but if I remember right we acutally cut a barb off for space and turned it into a 2-way. We also did the sear acutation different. Most that I see work by pushing on the sear arm to trigger the gun. Ours was a ram that when acutated pulled down on the sear. Would be impossible to turn that into a sleeper though ram takes up too much space. The gun was quick setup like that and I could actually walk it faster then I could my electro guns but it was unrelaible as all get out. It would fail multiple time a day of walk on and require some tinkering. Also really fast guys could out-shoot it's capabilities and turn it into a chuffing machine in short order. Heres the link to the thread we started way back when. Since then the mag used in the video has been sold off. Silencer.1 had all of the frame internals in his posession and he has since joined the Army I haven't heard from him in 3-4 years so it's exact design is lost to the world.Hell if you could get it to work right you could use the 3-way valve from a cocker. It does the same thing other that the 3-way from a cocker adds pressure in reverse to return the bolt. If you have soemthing that will open/close on the pressure to the ram i can't see how it wouldnt work other than placement and the area it needs to fit in....
https://www.automags.org/forums/showt...5&page=1&pp=30
Interesting read there. My biggest WOW was looking at the date you guys did this. Long before i started...LOLOriginally Posted by Miltonyz
I quit paintball very shortly after those posts, and didn't start playing again until last summer. So for me it was a huge wow when I saw just how widespread and refined the pnuematic mags had become. I have put some thought about having a kit installed. I still have the milled rail and tapped ASA. But my experience with the unreliability of that one still haunts me. All my buddies called it the "Frankenmag".My biggest WOW was looking at the date you guys did this. Long before i started...LOL
hi!
have any kits ready to go? i wanted the complete kit with magmods and mounting brackets....
and just wondering what is the difference between luke's ram and the regular ram...thanks!
ya me too, im interested in a pneu kit. do you have any available?
Originally Posted by cpark227
I had parts, but i just got a big pneu kit order that cleaned me out. More pneu kit parts are on order but it will prolly be a week till i get all the parts back in stock. Keep an eye out here or post up an i can PM you when i have kits ready again.Originally Posted by yahnnieFB
As for the rams, well i used to make my own and they were adjustable. For those of us that it seems we tinker more than we actuall use the guns...LOL I started carrying LUKE's ram cause people were askin for it by name so i figured i'd give the peopel what they asked for. All in they do the same thing.
Cy
Originally Posted by cpark227
I had parts, but i just got a big pneu kit order that cleaned me out. More pneu kit parts are on order but it will prolly be a week till i get all the parts back in stock. Keep an eye out here or post up an i can PM you when i have kits ready again.Originally Posted by yahnnieFB
As for the rams, well i used to make my own and they were adjustable. For those of us that it seems we tinker more than we actuall use the guns...LOL I started carrying LUKE's ram cause people were askin for it by name so i figured i'd give the peopel what they asked for. All in they do the same thing.
Cy
so will you have parts available sometime this week?
I just sent you payment via Paypal for a kit. Just send it when you get this next shipment in. I'm in no hurry. Well, impatient maybe.
going to need
1 CLIPPARD MPA-3 (COMPLETE) with lukes ram $20
1 90* FOR MPA-3 $1
4 MPA-3 MOUNTING SET SCREWS $1
2 STRAIGHT FITTINGS $2
2 FT. OF AIR LINE clear $2
not sure on shipping cost so please pm me a total so i can get payment to you thanks
Hey Cyber,
I need
(2x) 90* FOR MPA-3 $1
One black and one white if it doesn't matter to you. I can't get the last 1/16" in my latest mount without kinking from a straight barb.
i already posted that i was interested in a pneu kit but just wanted to let you know that i would like one of your pneu-kits with lukes ram and black hoses and fittings. thanks!
I have all those parts ready and will ship this weekend...Originally Posted by PBChappy
Replied to your PMOriginally Posted by Spider-TW
I have all the parts here with me just dont have much free time right now. I will have kits ready with in a week if i can ever work under 14 hours in a day again. keep up to date here or if you want you can pay and i'll ship soon as ther eare done...Originally Posted by yahnnieFB
Cy
I am looking for a MPA3 with Lukes Ram and 4 mounting screws. I am also PM'ing you for the total.
Thanks
looking for
2 complete MPA3's
1 luke's ram
3 90 fittings black
3 straight fittings black
2 ft clear line
4 mpa mounting screws
are these kits still for sale?
Yes ther are. I have a few kits left and getting more ready....Originally Posted by om3n
I need one. No bracket though...Originally Posted by cyberave68
Pm'd regarding whether you actually do the Pnuemodding work still and costs. Interested in Pneumodding/mag modding Intelliframe.
Pming you for a kit and mag mod
Hey did you forget about.me?! LOL
blah blah balh... Your a bum, i called you twice and you never called back. I have your stuff ready just wanted to know something before i shipped....Originally Posted by BigEvil
Cy
Sorry Ive been busy with ninja stuff. I will call ya tomorrow.Originally Posted by cyberave68
PM and Payment sent
PM'ed
Do you service valves?
Pm sent